Category
Brand
Price
Additional Filters
356 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Hans Karlsson Short Handled 60mm Adze [Preowned, As New, SOLD]Hans Karlsson Short Handled 60mm Adze [Preowned, As New, SOLD]
Sold
Hans Karlsson Short Handled 60mm Adze [Preowned, As New, SOLD]
These adzes are always in great demand but with a very limited production run. These famous Swedish made adzes are not so easy to get hold of (they seem to be sold out everywhere!). This example is a commission sale from a customer who has never used the adze, it is in “as new” condition, complete with a protective leather sheath. This 2 3/8” (about 60mm) wide cutting edge has...
£285.00 (VAT exempt)
Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]
Sold
Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]
They may look a bit scruffy but in fact that is just dried oil in the photos which disguises tools in G++ condition with full blades and nice rosewood knobs. This pair will clean up nicely. Patent date of Jan 95 (that will be 1895!).
£138.00 inc VAT
4 Small Beech Rebate Planes [Preowned, SOLD]4 Small Beech Rebate Planes [Preowned, SOLD]
Sold
4 Small Beech Rebate Planes [Preowned, SOLD]
All with the same owners stamp C Gibson. Convex from front to toe. 4 1/8” long C NURSE & CO. LONDON (owners stamp R. Gibson) Boat shaped sole. 4 ½” long. NURSE (C Gibson) Straight rebate. 4 ½” long. NURSE (C Gibson) Rounded sole. 4” long. (R. Gibson) All the wedges and irons are in g++ condition. It is a sweet collection. We have given...
£60.00 inc VAT
3 Vintage Mortise Chisels [Vintage, SOLD]3 Vintage Mortise Chisels [Vintage, SOLD]
Sold
3 Vintage Mortise Chisels [Vintage, SOLD]
These beauties (2 stamped BUCK and the larger one stamped I & H SORBY) I & H SORBY – octagonal handle – ½” wide BUCK – oval handle 3/16” wide BUCK – oval handle 3/8” wide Great condition. 11 1/2” - 12 ¼” overall length.
£72.00 inc VAT
Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]
Sold
Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]
The 2 ¼” wide iron is by Buck Owners stamp C Gibson
£24.00 inc VAT
6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]
Sold
6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]
Six, unused Jorgensen hand screws. As new. A commission sale. From the manufacturer's website... "Seasoned, straight-grain hard maple wood jaws marry with cold drawn steel-spindles and nuts with special double-lead threads. Together they create a handscrew clamp that holds tightly over broad areas, providing greater reach and a wider distribution of pressure than other clamps. The angle...
£180.00 (VAT exempt)
5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]
Sold
5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]
These 10 planes are all in G++ condition. We haven’t cleaned them up, but they will clean up beautifully. The wedges are all fine and the blades are working well. The planes are all stamped with the same owner’s stamp "C GIBSON" They came out of a joiner’s chest with some other tools featured in this week’s Fridays Finds. Pairs of No. 2, 4, 10, 12 &...
£88.00 inc VAT
Woodpeckers Woodworking Rule 300mm [Preowned, As New, SOLD]Woodpeckers Woodworking Rule 300mm [Preowned, As New, SOLD]
Sold
Woodpeckers Woodworking Rule 300mm [Preowned, As New, SOLD]
Pre-owned but unused. Reads from the centre on one edge and left to right on the other edge. Each edge is bevelled. Very crisp white markings 1mm increments. This rule has a very high level of accuracy. These rules are precision made from aircraft grade aluminium and anodized for surface protection and appearance. Woodpeckers say they are straighter, heavier and are easier to handle than any others...
£30.00 inc VAT
Lie-Nielsen No.5 1/2 - Jack Plane [Preowned, As New, SOLD]Lie-Nielsen No.5 1/2 - Jack Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No.5 1/2 - Jack Plane [Preowned, As New, SOLD]
An unused, as new plane with Lie-Nielsen branded plane sock. Pre-owned but we don’t think the owner did much more that take it out of the box and stick in the plane sock. It is in great condition. This is what we say about the plane in our Lie-Nielsen section… "A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers...
£455.00 inc VAT
Boxed Set of 5 Narex Bevel Edge Chisels [Preowned, SOLD]Boxed Set of 5 Narex Bevel Edge Chisels [Preowned, SOLD]
Sold
Boxed Set of 5 Narex Bevel Edge Chisels [Preowned, SOLD]
Pre-owned but sparsely used, they have been sharpened. Good to go to work. These are The Narex Richter chisels, a very well made and designed all-round bench chisel. The base of the box has some scratch marks but is in otherwise G++ condition. The chisels are also in G++ - F condition. 6mm, 9mm, 12mm, 19mm & 25mm wide. Ash hardwood handles have solid stainless steel ferrules and...
£100.00 inc VAT
Lie-Nielsen - Cross Peen Hammer (Brass Head) [Preowned, SOLD]Lie-Nielsen - Cross Peen Hammer (Brass Head) [Preowned, SOLD]
Sold
Lie-Nielsen - Cross Peen Hammer (Brass Head) [Preowned, SOLD]
Pre-owned. G++ condition. Hickory handled. 12" overall. The head is 4" wide and weighs 4 ounces. Used for nailing tacks and making fine blade adjustments on your planes. This has been used and the head has been cleaned up a bit. It has some superficial stain marks, the head is solid (no wobble) so this hammer will work perfectly. The handle is excellent. Original box...
£70.00 (VAT exempt)
Lie-Nielsen - Cross Peen Hammer (Hardened A2 Steel Head) [Preowned, SOLD]Lie-Nielsen - Cross Peen Hammer (Hardened A2 Steel Head) [Preowned, SOLD]
Sold
Lie-Nielsen - Cross Peen Hammer (Hardened A2 Steel Head) [Preowned, SOLD]
Pre-owned. G++ condition. Hickory handled. 12" overall. The head is 4" wide and weighs 4 ounces. Used for nailing tacks and making fine blade adjustments on your planes. This has been used and the head has been cleaned up a bit. It has some superficial stain marks, the head is solid (no wobble) so this hammer will work perfectly. The handle is excellent. Original box...
£70.00 (VAT exempt)
Lie-Nielsen - Cross Peen Hammer (A2 Steel Head) [Preowned, SOLD]Lie-Nielsen - Cross Peen Hammer (A2 Steel Head) [Preowned, SOLD]
Sold
Lie-Nielsen - Cross Peen Hammer (A2 Steel Head) [Preowned, SOLD]
Pre-owned. G++ condition. Hickory handled. 12" overall. The head is 4" wide and weighs 4 ounces. Used for nailing tacks and making fine blade adjustments on your planes. This has been used and the head has been cleaned up a bit. It has some superficial stain marks, the head is solid (no wobble) so this hammer will work perfectly. The handle is excellent. Original box...
£70.00 (VAT exempt)
Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]
Sold
Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]
Made by Pfeil - Switzerland Unused - fine condition - a commission sale. These Pfeil Punches for wood are for creating background detail for your carvings. They are made from steel and weigh 540g each. They are housed in a wooden base. Size - 10mm x 10mm x 135mm each. These are the same set of puches as Classic Hand Tools sell in their Pfeil carving tools section for £170 (and...
£125.00 (VAT exempt)
Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]
Sold
Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]
Made by Pfeil - Switzerland These tools are very popular based on our experience in selling Pfeil carving tools for the last 15 years (but clearly not by our customer though, as he has never used them!). Precisely ground and polished. Pear handles, 70mm blade length, 125mm overall length. The set which is housed in a wooden stand includes: 1 straight chisel 8mm (L1-8); 1 skew...
£215.00 (VAT exempt)
Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New, SOLD]Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New, SOLD]
Sold
Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New, SOLD]
This is a great value buy. These Henry Taylor incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. This set comprises the following gouges (if bought new from our site they would cost you £214) F11...
£164.00 (VAT exempt)
5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned, SOLD]5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned, SOLD]
Sold
5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned, SOLD]
These are pre-owned - little used chisels with cosmetic staining to the steel blades. We have quickly cleaned them up and we think they will be absolutely fine for many years to come presenting a very affordable opportunity to get a good spread of bench chisels. 3/8", 1/2", 5/8", 1", 1 1/4" wide Boxwood round handles with brass ferrules (the largest one is split but it isn't working free and could...
£65.00 (VAT exempt)
Iyoroi Spearpoint 18mm Drawshave Chisel - Yari Kanna [Preowned, As New, SOLD]Iyoroi Spearpoint 18mm Drawshave Chisel - Yari Kanna [Preowned, As New, SOLD]
Sold
Iyoroi Spearpoint 18mm Drawshave Chisel - Yari Kanna [Preowned, As New, SOLD]
Boxwood handle - unused. In fact whilst it looks like a chisel it is best described as a plane (kanna). These work by drawing the edge towards you. They are also described as a Japanese skew chisel that tapers to a point from 18mm. The length of the blade is 60mm with an overall length of 210mm Japanese Yari Kanna are unusual tools, descended from ancient Korean and Japanese bent chisels used...
£65.00 (VAT exempt)
Tormek Drill Bit Sharpening Attachment [Preowned, As New, SOLD]Tormek Drill Bit Sharpening Attachment [Preowned, As New, SOLD]
Sold
Tormek Drill Bit Sharpening Attachment [Preowned, As New, SOLD]
Pre-owned - unused, as new. This is a commission sale. With the Tormek Drill Bits Sharpening Attachment you can sharpen your drill bits (3-22mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape. See the video on the...
£215.00 (VAT exempt)
Clifton No.3 - Smoothing Plane [Preowned, SOLD]Clifton No.3 - Smoothing Plane [Preowned, SOLD]
Sold
Clifton No.3 - Smoothing Plane [Preowned, SOLD]
Pre-owned, a commission sale. This plane has seen little use and is in G++ condition with original box and packaging. This is the smallest smoothing plane Clifton make; ideal for those with smaller hands, or those with smaller jobs that don't require so much heft. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment...
£245.00 (VAT exempt)
Veritas - Edge Trimming Plane (Left Hand) [Preowned, SOLD]Veritas - Edge Trimming Plane (Left Hand) [Preowned, SOLD]
Sold
Veritas - Edge Trimming Plane (Left Hand) [Preowned, SOLD]
Pre-owned, a commission sale. This is what we and Lee Valley Tools say about the edge trimming plane "Edge-trimming planes are used for final trimming cuts on jointed boards to ensure smooth edges at exactly 90° to the face, and for working end grain. In many instances you will need only one model; the appropriate choice is often based on which of your hands is dominant. However, neither...

5

£135.00 (VAT exempt)
Veritas No.112 - Large Scraping Plane [Preowned, SOLD]Veritas No.112 - Large Scraping Plane [Preowned, SOLD]
Sold
Veritas No.112 - Large Scraping Plane [Preowned, SOLD]
Pre-owned, a commission sale. Original packaging, instruction leaflet and Veritas plane sack. This plane hasn't seen much work at all. G++ This is what we and Lee Valley Tools say about this large scraping plane.. "The Veritas® scraping plane is the ideal tool for final smoothing, especially when you have to deal with highly figured wood or reversing grain. With a well-sharpened...
£205.00 (VAT exempt)
Lie-Nielsen - Low Angle Smoothing Plane [Preowned, SOLD]Lie-Nielsen - Low Angle Smoothing Plane [Preowned, SOLD]
Sold
Lie-Nielsen - Low Angle Smoothing Plane [Preowned, SOLD]
Pre-owned, a commission sale. G++ condition. Very little use. Comes with branded plane sack. From our main Lie-Nielsen Section "The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is...
£295.00 (VAT exempt)
Lie-Nielsen No.60 1/2 - Low Angle Block Plane (Adjustable Mouth) [Preowned, SOLD]Lie-Nielsen No.60 1/2 - Low Angle Block Plane (Adjustable Mouth) [Preowned, SOLD]
Sold
Lie-Nielsen No.60 1/2 - Low Angle Block Plane (Adjustable Mouth) [Preowned, SOLD]
Pre-owned, a commission sale. From our main Lie-Nielsen Section "The Lie-Nielsen No 60½ Block Plane is based upon the old Stanley No 60½. This is a superb little block plane and should be in your tool kit, useful for all woodworking jobs in particular great for trimming end grain. The movable shoe in front of the blade allows you to easily adjust the mouth opening - fine mouth...
£175.00 (VAT exempt)
Blue Spruce Toolworks - 16oz Round-Headed Mallet [Preowned, SOLD]Blue Spruce Toolworks - 16oz Round-Headed Mallet [Preowned, SOLD]
Sold
Blue Spruce Toolworks - 16oz Round-Headed Mallet [Preowned, SOLD]
Infused curly maple head with an attractive beech handle. Brass ferrule. There are 3 or 4 minor dinks (2mm x 2mm) on the head (easily missed at first glance) and some superficial scratches consistent with just a few malet blows. This mallet has not been used much at all. We don't think this particular combination of handle/head is available currently.
£84.00 inc VAT
Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned, SOLD]Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned, SOLD]
Sold
Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned, SOLD]
This pre-owned plane has a few minor scratch marks on the sole but this plane has seen little use. No box but comes with a Lie-Nielsen branded plane sack. This is what we say about the plane in the main Lie-Nielsen section of our web site: ''The Lie-Nielsen No.62 Low Angle Jack Plane. What is not to like? You take the most popular and useful jack plane and bed it at a low angle (12°)....
£260.00 inc VAT
Lie-Nielsen No.7 - Joiner Plane [Preowned, As New, SOLD]Lie-Nielsen No.7 - Joiner Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No.7 - Joiner Plane [Preowned, As New, SOLD]
Pre-owned in fabulous condition, as new. ''The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas. The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane.'' The equivalent of a later type Stanley Bedrock No.607 jointer plane. 22''...
£525.00 inc VAT
Lie-Nielsen No.6 - Fore Plane [Preowned, As New, SOLD]Lie-Nielsen No.6 - Fore Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No.6 - Fore Plane [Preowned, As New, SOLD]
Pre-owned in fabulous condition, as new. The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a levelled surface ready for the smoothing plane. 18" (457mm) long 2 3/8" (60mm) blade. A2...
£495.00 inc VAT
Lie-Nielsen No.4 1/2 - Smoothing Plane [Preowned, As New, SOLD]Lie-Nielsen No.4 1/2 - Smoothing Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No.4 1/2 - Smoothing Plane [Preowned, As New, SOLD]
In fabulous condition, as new. "Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10 3/8'' (264mm) long. 2 3/8'' (60mm) blade. A2 steel. Iron body 5½lbs (2.5kg).''
£395.00 inc VAT
Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned, SOLD]Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned, SOLD]
Sold
Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned, SOLD]
This is a commission sale. Used but in G++ condition. This US made roofing square with a 180mm metric blade designed for accuracy and durability. Made with aerospace grade aluminium, hard anodised, this square is light and strong with very, easy to read measurements. The base (or heel) is anodised aluminium in red (no level) providing a reliable base that improves control and precision in marking...
£88.00 (VAT exempt)
Lie-Nielsen No.042 - Medium Shoulder Plane [Preowned, SOLD]Lie-Nielsen No.042 - Medium Shoulder Plane [Preowned, SOLD]
Sold
Lie-Nielsen No.042 - Medium Shoulder Plane [Preowned, SOLD]
Pre-owned, this is a commission sale. G++, little used condition Just a few surface scratches to the body. Full blade. Instruction leaflet included. This description of the plane is from the Lie-Nielsen planes section of our web site where this plane is available new for £329. ''An improved version of the now discontinued Record 042. This plane is 3/4'' wide and...
£205.00 (VAT exempt)
Lie-Nielsen - Boggs Spokeshave (Curved) [Preowned, SOLD]Lie-Nielsen - Boggs Spokeshave (Curved) [Preowned, SOLD]
Sold
Lie-Nielsen - Boggs Spokeshave (Curved) [Preowned, SOLD]
Pre-owned, used. G++ condition. A commission sale. Note: the curve on this spokeshave is extremely shallow. The Boggs Spokeshave is hefty and solid, weighing 12oz. Designed for fine, precise shaping in all woods. Body is 10" long with a 1" wide very slightly curved sole. The sole of this spokeshave has a gentle (almost imperceptible) 5 degree radius for working inside curves. 2"...
£175.00 (VAT exempt)
Lie-Nielsen - Boggs Spokeshave (Flat) [Preowned, SOLD]Lie-Nielsen - Boggs Spokeshave (Flat) [Preowned, SOLD]
Sold
Lie-Nielsen - Boggs Spokeshave (Flat) [Preowned, SOLD]
Pre-owned, used G++. A commission sale. The original Boggs Spokeshave is hefty and solid, weighing 12 oz. Designed for fine, precise shaping in all woods. Body is 10" long with a 1" wide flat sole. 2" wide x 1/8" thick A2 blade. Bronze body and cap. Hickory handles. Weight is 12 oz. Instruction leaflet and scruffy original box. This spokeshave hasn’t...
£145.00 (VAT exempt)
Claire Minihan - Walnut & Brass Travisher [Preowned, SOLD]Claire Minihan - Walnut & Brass Travisher [Preowned, SOLD]
Sold
Claire Minihan - Walnut & Brass Travisher [Preowned, SOLD]
Pre-owned, a commission sale. Unusually for us we were unaware of Claire Minihan as a tool maker but we are glad to be offering one of her travishers for sale. A bit of research informs us that her travishers are a favourite with the likes of Peter Galbert USA (“she makes the best travishers in the world”). In 2024 she was offering this travisher for about $500 but you would have to wait well...
£235.00 (VAT exempt)
Lie-Nielsen SD-9 - Honing Guide Screwdriver (Curly Maple Handle) [Preowned, SOLD]
Sold
Lie-Nielsen SD-9 - Honing Guide Screwdriver (Curly Maple Handle) [Preowned, SOLD]
This is designed for the Lie-Nielsen honing guide. Pre-owned in new condition F (Fine). A commission sale.
£42.00 (VAT exempt)
Lie-Nielsen SD-7 - Frog Screwdriver (Curly Maple Handle) [Preowned, SOLD]Lie-Nielsen SD-7 - Frog Screwdriver (Curly Maple Handle) [Preowned, SOLD]
Sold
Lie-Nielsen SD-7 - Frog Screwdriver (Curly Maple Handle) [Preowned, SOLD]
This is for the Small Handle Nut and for adjusting the frog. Pre-owned in new condition F (Fine). A commission sale.
£42.00 (VAT exempt)
Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]
Sold
Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]
Pre-owned – a commission sale 4, 5, 6, 7 ,8 & 10mm blades come with this plane which has been lightly used. Original packaging (the box is a bit tatty) and Instruction booklet. The condition of the plane and blades is Good ++ (G++) which indicates it is not new, but has been well cared for and has no defects over and above superficial cosmetic blemishes. “Closest in size...
£230.00 inc VAT
Bad Axe Toolworks - D8 Panel Saw [Preowned, SOLD]Bad Axe Toolworks - D8 Panel Saw [Preowned, SOLD]
Sold
Bad Axe Toolworks - D8 Panel Saw [Preowned, SOLD]
A beauty and a steal. Pre-owned, commission sale. G++ condition – superficial wear marks only. The D8 is dubbed by Bad Axe Tool Works as the 'Henry Disston' in honour of the legendary saw maker himself. The Bad Axe D8 features a meticulously tapered grind achieved through advanced grinding techniques, ensuring a strong, agile blade that performs reliably under pressure. ergonomic...
£275.00 (VAT exempt)
Bad Axe Toolworks – 14'' Hybrid Tenon Saw [Preowned, SOLD]Bad Axe Toolworks – 14'' Hybrid Tenon Saw [Preowned, SOLD]
Sold
Bad Axe Toolworks – 14'' Hybrid Tenon Saw [Preowned, SOLD]
Pre-owned, commission sale. G++ condition –We have given this a very light clean and many of the usual grubby spots that always accumulate have disappeared but some remain with some scratches. Closed maple handle with brass nuts. The saw blade depth is 3 3/8” The saw back is black oxidised steel. 11 ppi
£185.00 (VAT exempt)
Lie-Nielsen – Pair of 1/2'' Skew Chisels [Preowned, SOLD]Lie-Nielsen – Pair of 1/2'' Skew Chisels [Preowned, SOLD]
Sold
Lie-Nielsen – Pair of 1/2'' Skew Chisels [Preowned, SOLD]
Pre-owned but still with the wax on the ends. A commission sale. These skew chisels are not currently offered by Lie-Nielsen so this is a rare opportunity to purchase. No box.
£250.00 (VAT exempt)
Lie-Nielsen – 3/8'' Corner Chisels [Preowned, SOLD]Lie-Nielsen – 3/8'' Corner Chisels [Preowned, SOLD]
Sold
Lie-Nielsen – 3/8'' Corner Chisels [Preowned, SOLD]
Pre-owned but unused. A commission sale. Producing square mortises is exacting work. The Corner Chisel, used after the mortise has been roughed out by hand or with a slot mortiser—which produces round edged mortises—helps square corners easily and precisely. Made from A2 Tool Steel, hardened to RC 60-62 and ground razor sharp. Bevelled at 30º. Overall length is approximately 10". No box.
£125.00 (VAT exempt)
Lie-Nielsen No.97 1/2 - Small Chisel Plane [Preowned, SOLD]Lie-Nielsen No.97 1/2 - Small Chisel Plane [Preowned, SOLD]
Sold
Lie-Nielsen No.97 1/2 - Small Chisel Plane [Preowned, SOLD]
Pre-owned but we think this plane is unused. A commission sale. The Lie-Nielsen Chisel Plane is the perfect little tool 175mm x 45mm (6 1/2" x 1 3/4") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 4.8mm - 3/16" A2 thick blade is set at 12 degrees. The blade is as new. You adjust the depth of the cut...
£175.00 (VAT exempt)
Lie-Nielsen No.5 1/2 - Jack plane (with extra Frog) [Preowned, SOLD]Lie-Nielsen No.5 1/2 - Jack plane (with extra Frog) [Preowned, SOLD]
Sold
Lie-Nielsen No.5 1/2 - Jack plane (with extra Frog) [Preowned, SOLD]
A commission sale. Used with some wear marks and some cosmetic stain / surface rust marks (which have been cleaned and oiled). So, this is a user grade plane, the sole of the plane is good. Don’t buy if you cant ignore the visual distractions. This plane has been used and will offer a lifetime of use yet. It is priced accordingly. The plane is fitted with a 50 degree frog but is also...
£395.00 (VAT exempt)
Lie-Nielsen - Pair of Preston-style Bronze Spokeshaves [Preowned, SOLD]Lie-Nielsen - Pair of Preston-style Bronze Spokeshaves [Preowned, SOLD]
Sold
Lie-Nielsen - Pair of Preston-style Bronze Spokeshaves [Preowned, SOLD]
Lovely flat and curved faced, small "Edward Preston" style spokeshaves each with its own leather Lie-Nielsen leather pouch. We don't think these spokeshaves have been used. Note - The pair, brand new, without the leather wallets would currently set you back £345 on our website so effectively the leather wallets are for free. A commission sale.
£345.00 (VAT exempt)
Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]
Sold
Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]
A commission sale. Pre-owned and used but well cared for, We have given this plane a quick clean so it looks quite shiny and new. We cleaned it to rid it of some staining marks which have mostly disappeared. Scratch marks on the sole, consistent with use remain. This is what we say about the brand-new version on our main LN section. “Lie-Nielsen's smoothing planes are precision...
£425.00 (VAT exempt)
Blue Spruce Toolworks - 16oz. Round Mallet [Preowned, SOLD]Blue Spruce Toolworks - 16oz. Round Mallet [Preowned, SOLD]
Sold
Blue Spruce Toolworks - 16oz. Round Mallet [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer. Almost as new, save for a very small dink at the base of the handle. Virtually unused. Beautifully figured resin impregnated maple head with African blackwood. This is a extract from our Blue Spruce section where this mallet retails for £148 ''Blue Spruce Round Mallets feature a maple head infused with a tough polymer...
£120.00 (VAT exempt)
Lie-Nielsen - Dovetail Marker [Preowned, SOLD]Lie-Nielsen - Dovetail Marker [Preowned, SOLD]
Sold
Lie-Nielsen - Dovetail Marker [Preowned, SOLD]
Hardly used. Cleaned by us to rid it of some age staining. This is a discontinued offering from Lie-Nielsen. Boxed (the box is in G+ condition). This brass and rosewood dovetail maker was a great seller back in the day. A commission sale.
£45.00 (VAT exempt)
Lie-Nielsen - Dovetail Saw [Preowned, SOLD]Lie-Nielsen - Dovetail Saw [Preowned, SOLD]
Sold
Lie-Nielsen - Dovetail Saw [Preowned, SOLD]
Pre-owned with a few dinks and minor scratches/staining marks. 15ppi Rip cut Lie-Nielsen dovetail saw – 9” blade. This has been used but has a lot of life left to cut several hundred more dovetails. A commission sale.
£115.00 (VAT exempt)
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |