Category
Brand
Collection
Price
Additional Filters
562 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]
Sold
Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]
This 3 volume set of Knight's American Mechanical Dictionaries and the single volume of Knight's New Mechanical Dictionary (Supplement) was reprinted jointly by The Mid-West Tool Collectors Association and The Early American Industries Association October 1979. It is written elsewhere that "This work has been selected by scholars as being culturally important, and is part of the knowledge...
£250.00 (VAT exempt)
Plough Plane Project [Preowned, SOLD]Plough Plane Project [Preowned, SOLD]
Sold
Plough Plane Project [Preowned, SOLD]
So, this grubbly plane, like Fraser, needs a good clean. Beech, with brass tips, escutcheons and depth stop screw. You do not need to put on the marigolds or find a buffing wheel to clean it up. Nothing too heavy is needed , just a bit of tender loving care with a bit of fine wire wool to clean off a few idle paint marks, years of dust layers and a minor amount of surface rust. We think this...
£75.00 inc VAT
Drawer Lock Chisels (Pair) - Lie Nielsen Toolworks [Preowned, Unused, SOLD]
Sold
Drawer Lock Chisels (Pair) - Lie Nielsen Toolworks [Preowned, Unused, SOLD]
We haven't seen a pair of these for many years now. This is how you use them https://www.youtube.com/watch?v=AtT-7tA9W9I&list=PL76ED2FC43576D6AF&index=4 These are pre-owned but they have not been used.
£120.00 inc VAT
Veritas Carvers Vice [Preowned, SOLD]Veritas Carvers Vice [Preowned, SOLD]
Sold
Veritas Carvers Vice [Preowned, SOLD]
Pre-owned. We have given this a little clean and it is in perfect working order. For use on benches/work surfaces from 16mm - 100mm (5/8'' to 4'') thick. You can read a full description here It comes with the 3 1/2'' dia. by 1/2'' thick mounting plate with steel rod as photographed.
£100.00 inc VAT
Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]
Sold
Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]
Pre-owned but hardly used. This set of 7 includes the following sizes: 1/8'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'' & 5/8'' (note the correction to earlier description that listed 2 x 3/8" - our apologies for that but it was Fraser's fault as usual) The 5/16'' appears to have been sharpened once but the others are unused. The...
£665.00 inc VAT
Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]
Sold
Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]
Here is a rare treat. The left hand version has been discontinued and the right handed plane in bronze has not been seen for a few years yet. The Lie-Nielsen No 140 Skew Block Plane is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A...
£1,200.00 inc VAT
Timber Scribe and Race Knife [Preowned, SOLD]Timber Scribe and Race Knife [Preowned, SOLD]
Sold
Timber Scribe and Race Knife [Preowned, SOLD]
Rosewood handled with brass ferrule, this attractive race knife and scribe is unmarked. Original including the wing nut. A lovely vintage tool. Timber scribes were used to mark casks, imported timber, packing crates and trees for felling.
£36.00 inc VAT
Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]
Sold
Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]
This is a lovely vintage Saddlers round knife from the USA manufacturer CS Osborne. It is difficult to date but from its form and simplistic beauty we hazard a guess that it is an early one dating as far back as the 19th Century.The blade has a lovely ring to it when flicked by a finger. It is marked ''C S Osborne & Co. Newark N.J Made in USA'' on the blade. It is also marked...
£50.00 inc VAT
Auriou Cabinet Rasp (Coarse) - 300mm (12'') Grain 4 [Preowned, Unused, SOLD]Auriou Cabinet Rasp (Coarse) - 300mm (12'') Grain 4 [Preowned, Unused, SOLD]
Sold
Auriou Cabinet Rasp (Coarse) - 300mm (12'') Grain 4 [Preowned, Unused, SOLD]
Pre-owned - slight scuffing to the handle but this rasp has been unused. From French maker Auriou Toolworks - The king of hand cut rasp making (no need to take our word for it - hundreds of others say so!). This marvellous French company can trace its history back to 1756 (that's the reign of Louis XV - blimey the French had a lot of Louis's!). I don't think they are doing things...
£100.00 inc VAT
Auriou Cabinet Rasp (Fine) - 300mm (12'') Grain 12 [Preowned, Unused, SOLD]Auriou Cabinet Rasp (Fine) - 300mm (12'') Grain 12 [Preowned, Unused, SOLD]
Sold
Auriou Cabinet Rasp (Fine) - 300mm (12'') Grain 12 [Preowned, Unused, SOLD]
Pre-owned - slight scuffing to the handle but this rasp has been unused. From French maker Auriou Toolworks - The king of hand cut rasp making (no need to take our word for it - hundreds of others say so!). This marvellous French company can trace its history back to 1756 (that's the reign of Louis XV - blimey the French had a lot of Louis's!). I don't think they are doing things too differently...
£135.00 inc VAT
Auriou Cabinet Rasp (Coarse) - 250mm (10'') Grain 5 [Preowned, Unused, SOLD]Auriou Cabinet Rasp (Coarse) - 250mm (10'') Grain 5 [Preowned, Unused, SOLD]
Sold
Auriou Cabinet Rasp (Coarse) - 250mm (10'') Grain 5 [Preowned, Unused, SOLD]
Pre-owned - slight bruise to the French walnut handle but this rasp has been unused. From French maker Auriou Toolworks - The king of hand cut rasp making (no need to take our word for it - hundreds of others say so!). This marvellous French company can trace its history back to 1756 (that's the reign of Louis XV - blimey the French had a lot of Louis's!). I don't think they are doing things too...
£90.00 inc VAT
Auriou Cabinet Rasp (Medium) - 250mm (10'') Grain 9 [Preowned, Unused, SOLD]Auriou Cabinet Rasp (Medium) - 250mm (10'') Grain 9 [Preowned, Unused, SOLD]
Sold
Auriou Cabinet Rasp (Medium) - 250mm (10'') Grain 9 [Preowned, Unused, SOLD]
Pre-owned but this rasp has been unused. From French maker Auriou Toolworks - The king of hand cut rasp making (no need to take our word for it - hundreds of others say so!). This marvellous French company can trace its history back to 1756 (that's the reign of Louis XV - blimey the French had a lot of Louis's!). I don't think they are doing things too differently from nearly 170 years ago. The lesson...
£90.00 inc VAT
Auriou Rasps in your Grasp - 3 Finishing Rasps [Preowned, SOLD]Auriou Rasps in your Grasp - 3 Finishing Rasps [Preowned, SOLD]
Sold
Auriou Rasps in your Grasp - 3 Finishing Rasps [Preowned, SOLD]
200mm (8") Grain 11 & 13 Cabinet Rasps - Fine & extra fine 150mm Modellers rasps - extra fine grain (cut) 15 (the finest!) Pre-owned - slight scuffing to the handles. These have been used slightly but are in fully workable order. From French maker Auriou Toolworks - The king of hand cut rasp making (no need to take our word for it - hundreds of others say so!). This marvellous French company can...
£250.00 inc VAT
Large Flexcut Carving Starter Set [Preowned, Unused, SOLD]Large Flexcut Carving Starter Set [Preowned, Unused, SOLD]
Sold
Large Flexcut Carving Starter Set [Preowned, Unused, SOLD]
This boxed set of 6 tools includes a 9mm 60 degree V tool, a series-11 (veining) 6mm gouge, a series-10 14mm gouge, a series-7 11mm gouge, a series-5 17mm gouge, and a series-3 25mm gouge. These are Flexcut's large sculpture tools, which are 250mm overall length. In their original box, totally unused so "as new", although technically pre-owed as we bought them as part of a clearance lot. Available...
£135.00 inc VAT
Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]
Sold
Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]
Pre-owned but hardly used at all. This Lie-Nielsen small chisel plane comes with a branded LN sack to keep it protected. The Lie-Nielsen Chisel Plane is the perfect little tool 175mm x 45mm (6½" x 1¾") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 4.8mm - 3/16" A2 thick blade is set at 12 degrees. The blade is as new. You...
£175.00 inc VAT
Lie Nielsen Toolworks - Boggs Spokeshave (Flat) [Preowned, Unused, SOLD]Lie Nielsen Toolworks - Boggs Spokeshave (Flat) [Preowned, Unused, SOLD]
Sold
Lie Nielsen Toolworks - Boggs Spokeshave (Flat) [Preowned, Unused, SOLD]
Pre-owed but unused in Lie Nielsen leather case. The original Boggs Spokeshave is hefty and solid, weighing 12 oz. Designed for fine, precise shaping in all woods. Available with either a flat or curved sole. Body is 10" long with a 1" wide flat sole. 2" wide x 1/8" thick A2 blade. Bronze body and cap. Hickory handles. Weight is 12 oz.
£195.00 inc VAT
Lie Nielsen Toolworks - Boggs Spokeshave (Curved) [Preowned, Unused, SOLD]Lie Nielsen Toolworks - Boggs Spokeshave (Curved) [Preowned, Unused, SOLD]
Sold
Lie Nielsen Toolworks - Boggs Spokeshave (Curved) [Preowned, Unused, SOLD]
Pre-owed but unused in Lie Nielsen leather case. Note: the curve is extremely shallow. The original Boggs Spokeshave is hefty and solid, weighing 12 oz. Designed for fine, precise shaping in all woods. Available with either a flat or curved sole. Body is 10" long with a 1" wide flat sole. The sole of the Curved Spokeshave has a gentle, 5" radius for working inside curves. 2" wide x 1/8" thick A2...
£225.00 inc VAT
Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]
Sold
Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]
This is preowned, has a full blade, and has seen little or no use.
£84.00 inc VAT
Lie Nielsen Toolworks 10 1/4 Rebate Plane [Preowned, Unused, SOLD]Lie Nielsen Toolworks 10 1/4 Rebate Plane [Preowned, Unused, SOLD]
Sold
Lie Nielsen Toolworks 10 1/4 Rebate Plane [Preowned, Unused, SOLD]
Preowned, unused - in "as new" condition. Comes with Lie Nielsen branded plane sock. Also known as a Carriage Maker’s or Jack Rebate Plane, this is the largest rabbet plane made. Based on the Stanley 10¼, which went out of production in the mid-1940s, we modified the design to fit the Bedrock format. Adjustable side nickers make clean, cross-grain cuts. Both handle and knob can tilt left or right...
£450.00 inc VAT
Veritas Bullnose Plane [Preowned, Unused, SOLD]Veritas Bullnose Plane [Preowned, Unused, SOLD]
Sold
Veritas Bullnose Plane [Preowned, Unused, SOLD]
Pre-owned but unused. This is what we say about it on our main site where this exact tool is available for £233 inc VAT "The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll ever own. Designed for maximum versatility, it performs as either a bullnose or a chisel plane as required. Simply loosen the brass toe-locking...
£155.00 inc VAT
Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]
Pre-owned but never used. The description in our Lie-Nielsen plane section says this... "The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is only 9½" (24.1cm) long and weighs 3¾ lbs. It is called a...
£295.00 inc VAT
Armourers Brass Brace [Preowned, SOLD]Armourers Brass Brace [Preowned, SOLD]
Sold
Armourers Brass Brace [Preowned, SOLD]
This is a sweetie! Stamped RL . iii .10-13 . N . With the government arrow underneath. Measuring 10" overall with a tapered square chuck and a thumb screw (which we do not think is original but it works perfectly well). The 2 1/4” diameter rotating head connects to the body of the brace and it all seems to be working jolly nicely.
£35.00 inc VAT
Woodpeckers Saddle Square T-100 [Preowned, SOLD]Woodpeckers Saddle Square T-100 [Preowned, SOLD]
Sold
Woodpeckers Saddle Square T-100 [Preowned, SOLD]
Pre-owned 100mm T-square made in the USA. Very minor cosmetic blemishes. Edge markings to 120mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying...
Was £54.00 Now £48.00 inc VAT
Woodpeckers Saddle T-150 [Preowned, Unused, SOLD]Woodpeckers Saddle T-150 [Preowned, Unused, SOLD]
Sold
Woodpeckers Saddle T-150 [Preowned, Unused, SOLD]
Pre-owned T-150 metric square made in the USA. Unused, as new. Edge markings to 170mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line...
Was £66.00 Now £60.00 inc VAT
Woodpeckers Saddle T-200 [Preowned, As New, SOLD]Woodpeckers Saddle T-200 [Preowned, As New, SOLD]
Sold
Woodpeckers Saddle T-200 [Preowned, As New, SOLD]
Pre-owned T-200 metric square made in the USA. Unused, as new. Currently selling new elesewhere on the web for over £100 Edge markings to 220mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil...
£75.00 inc VAT
Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]
Sold
Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]
Pre-owned T-300 metric square made in the USA. Unused, as new. Edge markings to 320mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line...
£84.00 inc VAT
Simon James 19mm Holdfasts (Pair) [Preowned, Unused, SOLD]Simon James 19mm Holdfasts (Pair) [Preowned, Unused, SOLD]
Sold
Simon James 19mm Holdfasts (Pair) [Preowned, Unused, SOLD]
Pre-owned but unused. Superficial scratching but otherwise absolutely fit for purpose. This is the description from our main site when the pair are sold for £59 "Handmade, using traditional methods and a small forge by experienced craftsmen as a cottage industry. They are not mass produced so everyone has very slight differences, which is what you expect with handmade workmanship. They are all...
£48.00 inc VAT
3 Bridge City Tool Works Scratch Awls [Preowned, Unused, SOLD]3 Bridge City Tool Works Scratch Awls [Preowned, Unused, SOLD]
Sold
3 Bridge City Tool Works Scratch Awls [Preowned, Unused, SOLD]
SA 1 v 2 - 4 1/2" (115mm) scratch awl (red handle) SA - 2 v 2 - 8" (200mm) scratch awl (blue handle) SA - 3 v 2 - 8" (200mm) bent tip scratch awl (black handle) CNC-turned and anodised aluminium heads. Used for scribing wood, metal, glass, ceramics etc. You can draw lines in the tightest of situations, such as dovetails, mortises, tenons or profiles. The hardened steel blade is long and narrow and...
£60.00 inc VAT
2 Scratch Awls - Bridge City Tool Works [Preowned, Unused, SOLD]2 Scratch Awls - Bridge City Tool Works [Preowned, Unused, SOLD]
Sold
2 Scratch Awls - Bridge City Tool Works [Preowned, Unused, SOLD]
SA - 2 v 2 - 8" (200mm) scratch awl (blue handle) SA - 3 v 2 - 8" (200mm) bent tip scratch awl (black handle) These have not been used. The lids to the original BC boxes are all missing. CNC-turned and anodised aluminium heads. Used for scribing wood, metal, glass, ceramics etc. You can draw lines in the tightest of situations, such as dovetails, mortises, tenons or profiles. The hardened steel...
Was £40.00 Now £36.00 inc VAT
Veritas Small Low Angle Smoothing Plane [Preowned, Unused, SOLD]Veritas Small Low Angle Smoothing Plane [Preowned, Unused, SOLD]
Sold
Veritas Small Low Angle Smoothing Plane [Preowned, Unused, SOLD]
Pre-owned but unused, with Veritas plane sack. This description is from our web site (this plane currently is out of stock there). "This Veritas low angle smoother is 225mm long, 59mm wide and weighs only 1.25kg. It is easier to handle than a full size smoother. Think of it lying somewhere between a large block plane and a full size smoother, then you’ll see just how useful this plane can be. Like...
£216.00 inc VAT
Clifton No.6 Fore Plane - Old School! [Preowned, SOLD]Clifton No.6 Fore Plane - Old School! [Preowned, SOLD]
Sold
Clifton No.6 Fore Plane - Old School! [Preowned, SOLD]
Pre-owned with a few dints and scratches but in excellent functional order. This is an older Clifton (Sheffield) model which many would say are better than the new models (don't shoot the messenger!). A 2 piece cap iron and hand forged 2 3/8" wide blade are great features. Green painted which dates it to about at least 10-12 years ago. It can't have done much work as the iron is still very full. This...
£265.00 inc VAT
Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]
Sold
Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]
Pre Loved
£325.00 inc VAT
Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]
Sold
Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]
Pre Loved
£335.00 inc VAT
Woodpeckers - 2616SS Square - 600mm [Preowned, Unused, SOLD]Woodpeckers - 2616SS Square - 600mm [Preowned, Unused, SOLD]
Sold
Woodpeckers - 2616SS Square - 600mm [Preowned, Unused, SOLD]
Pre Loved
£270.00 inc VAT
Stanley No.18 steel bevel - The Eureka [Preowned, SOLD]Stanley No.18 steel bevel - The Eureka [Preowned, SOLD]
Sold
Stanley No.18 steel bevel - The Eureka [Preowned, SOLD]
Pre Loved
Was £72.00 Now £66.00 inc VAT
Folding Timber Scribe / Race Knife [Preowned, SOLD]Folding Timber Scribe / Race Knife [Preowned, SOLD]
Sold
Folding Timber Scribe / Race Knife [Preowned, SOLD]
Pre Loved
£25.00 inc VAT
Vintage Coopers Inshave - William Graves & Sons - Sheffield [Preowned, SOLD]Vintage Coopers Inshave - William Graves & Sons - Sheffield [Preowned, SOLD]
Sold
Vintage Coopers Inshave - William Graves & Sons - Sheffield [Preowned, SOLD]
Pre Loved
£30.00 inc VAT
Stanley 90 Bullnose Plane [Preowned, SOLD]Stanley 90 Bullnose Plane [Preowned, SOLD]
Sold
Stanley 90 Bullnose Plane [Preowned, SOLD]
Pre Loved
£48.00 inc VAT
Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]
Sold
Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]
Pre Loved
£25.00 inc VAT
Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]
Sold
Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]
Pre Loved
£36.00 inc VAT
Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]
Sold
Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]
Pre Loved
£45.00 inc VAT
Lie Nielsen Toolworks - Cross-Cut Tenon Saw (Brass Backed) - 13ppi [Preowned, SOLD]Lie Nielsen Toolworks - Cross-Cut Tenon Saw (Brass Backed) - 13ppi [Preowned, SOLD]
Sold
Lie Nielsen Toolworks - Cross-Cut Tenon Saw (Brass Backed) - 13ppi [Preowned, SOLD]
Pre Loved
£250.00 inc VAT
Lie Nielsen 01 Chisels - set of 7 [Preowned, SOLD]Lie Nielsen 01 Chisels - set of 7 [Preowned, SOLD]
Sold
Lie Nielsen 01 Chisels - set of 7 [Preowned, SOLD]
Pre Loved
£495.00 (VAT exempt)
Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]
Sold
Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]
Pre Loved
£125.00 (VAT exempt)
Clifton 3110 - 29mm Combination rebate, bullnose & chisel plane. [Preowned, SOLD]Clifton 3110 - 29mm Combination rebate, bullnose & chisel plane. [Preowned, SOLD]
Sold
Clifton 3110 - 29mm Combination rebate, bullnose & chisel plane. [Preowned, SOLD]
Sold
£155.00 (VAT exempt)
Lie-Nielsen Toolworks No.5 1/2 Jack Plane [Preowned, SOLD]Lie-Nielsen Toolworks No.5 1/2 Jack Plane [Preowned, SOLD]
Sold
Lie-Nielsen Toolworks No.5 1/2 Jack Plane [Preowned, SOLD]
Pre Loved
£360.00 (VAT exempt)
Lie Nielsen 55 degree replacement frog 2/3/8 [Preowned, SOLD]Lie Nielsen 55 degree replacement frog 2/3/8 [Preowned, SOLD]
Sold
Lie Nielsen 55 degree replacement frog 2/3/8 [Preowned, SOLD]
Sold
£125.00 (VAT exempt)
Travisher - Hard Maple from The Windsor Workshop [Preowned, SOLD]Travisher - Hard Maple from The Windsor Workshop [Preowned, SOLD]
Sold
Travisher - Hard Maple from The Windsor Workshop [Preowned, SOLD]
Sold
£140.00 (VAT exempt)
Page: First | | 7 | 8 | 9 | 10 | 11 | 12 |