Brand
Collection
Price
Additional Filters
209 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Norris A5 Smoothing Plane – original box [Vintage, SOLD]Norris A5 Smoothing Plane – original box [Vintage, SOLD]
Sold
Norris A5 Smoothing Plane – original box [Vintage, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£425.00 (VAT exempt)
Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]
Sold
Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£325.00 inc VAT
Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]
Sold
Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£325.00 inc VAT
Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]
Sold
Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£480.00 inc VAT
6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]
Sold
6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]
Attractive French Walnut handles for chisels, rasps etc. 5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist. The handles are pre-drilled with a 4mm diameter hole about 12mm deep. Clear lacquer finish. New old stock.
£35.00 inc VAT
Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]
Sold
Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]
2 3/8" wide Rob Cosman IBC plane & cap iron Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.140 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while the sides are precision-ground square to the bevel and hand-polished for optimal performance. Unused but...
£65.00 inc VAT
Lamello Minispot G2a [Clearance, As New, SOLD]Lamello Minispot G2a [Clearance, As New, SOLD]
Sold
Lamello Minispot G2a [Clearance, As New, SOLD]
G2A is the Minispot grooving machine for cutting out knots, resin pockets or damaged areas with patch size 2. The movable cover allows the groove to be cut very close to the rabbet edge, without the material thickness of the base plate coming into play. The transparent rear cover enables accurate positioning of the G2A over the relevant area, thus ensuring a perfect repair. We are not sure...
£245.00 inc VAT
Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]
Sold
Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]
Lamello Top 20 S2 Biscuit Jointer - New Old stock The Top 20S is considered superior to standard biscuit jointers for precision work, especially when using its adjustable height stop for parallel alignment. We have had this in our stock room for at least a decade. It has been quietly sitting in its original box, doing absolutely nothing at all. The winter months clean continues at Classic...
£395.00 inc VAT
Record No.3 Engineers Vice [Pre-owned, SOLD]Record No.3 Engineers Vice [Pre-owned, SOLD]
Sold
Record No.3 Engineers Vice [Pre-owned, SOLD]
UK mainland shipping only and excluding post codes AB31-56, BT 1-94, FK17-19, HS1-9, IM 1-99, IV1-63, KA, Kw1-9, PA 20-88, PH 15 - 50, PO 31-41, TR 21-25 & ZE1-3 and Guernsey & Jersey
£135.00 inc VAT
Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]
Sold
Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]
This clever and very well-made marking gauge is made by JessEm Tool Company in Canada and normally retails for about £135. The Model number is 08803. The Wood Sabre Metric Marking Gauge from The JessEm Tool Company is machined out of high-quality stainless steel, 6061 aluminium and anodised for durability. The design allows the user to dial in their scribe line from 0 up to 150mm. The bevelled...
£75.00 inc VAT
Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]
Sold
Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]
These bevel gear hand drills are very underrated examples of hand tool ingenuity. Our American friends seem to hold their clever design and functional efficiency in higher regard than user/collectors on this side of the pond (as they do wrenches and other seemingly simple tools). Fun to use. Note: there is a spring missing in the jaw mechanism, so clamping is slightly assymetric, but still central....
£24.00 inc VAT
Bessey Uni-Clamps - 4 Pack - 600mm [Clearance, UK mainland only, SOLD]
Sold
Bessey Uni-Clamps - 4 Pack - 600mm [Clearance, UK mainland only, SOLD]
UK mainland shipping only and excluding post codes AB31-56, BT 1-94, FK17-19, HS1-9, IM 1-99, IV1-63, KA, Kw1-9, PA 20-88, PH 15 - 50, PO 31-41, TR 21-25 & ZE1-3 and Guernsey & Jersey
£80.00 inc VAT
Record 050 Combination Plane [Pre-owned, As New, SOLD]Record 050 Combination Plane [Pre-owned, As New, SOLD]
Sold
Record 050 Combination Plane [Pre-owned, As New, SOLD]
Never used. All in 90-100% as new condition (just the long bars are a little scruffy). Original tatty box but pretty much everything else including all the 18 cutters are in unused, untarnished condition. Instruction booklet.
£125.00 inc VAT
Preston Flat Soled Spokeshave – Nickel Plated [Vintage, SOLD]Preston Flat Soled Spokeshave – Nickel Plated [Vintage, SOLD]
Sold
Preston Flat Soled Spokeshave – Nickel Plated [Vintage, SOLD]
This attractive shave is the Preston 1391 shave with 2'' blade Original Preston iron with plenty of life left. .10'' overall. A very attractive which presents well with all original parts. A commission sale.
£75.00 (VAT exempt)
Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage, SOLD]Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage, SOLD]
Sold
Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage, SOLD]
Boxwood beauty!
£110.00 (VAT exempt)
Edward Preston Wide Shoulder Plane No.1368 [Vintage, SOLD]Edward Preston Wide Shoulder Plane No.1368 [Vintage, SOLD]
Sold
Edward Preston Wide Shoulder Plane No.1368 [Vintage, SOLD]
In full working order, this heavy-duty shoulder plane is supplied with a new Ray Iles iron as the previous owner has exhausted the original cutter (also supplied) 1 ¼” wide and 8 1/4” long. You can read all about Preston Shoulder planes at Preston Tool Reviews website An excellent alternative to the current new offerings by Lie Nielsen, Veritas & Clifton. The mouth...
£120.00 (VAT exempt)
King Deluxe Sharpening Stone – Monster Size [Pre-owned, Unused, SOLD]King Deluxe Sharpening Stone – Monster Size [Pre-owned, Unused, SOLD]
Sold
King Deluxe Sharpening Stone – Monster Size [Pre-owned, Unused, SOLD]
1000 grit unused Japanese King brand waterstone. 230mm x 100mm x 80mm. A little workshop dusty dirty but unused in original scruffy packaging. A commission sale.
£50.00 (VAT exempt)
Clifton Multi-Plane [Pre-owned, SOLD]Clifton Multi-Plane [Pre-owned, SOLD]
Sold
Clifton Multi-Plane [Pre-owned, SOLD]
This plane was made in small numbers as a copy of the Record 045 and Stanley 45 multi plane. It has been used only for demonstration and display purposes. In fitted box with 23 cutters plus the slitting cutter in a plastic wallet. 14 plough cutters from 4mm – 32mm 5 beading cutters 3.2mm – 12mm 2 tonguing cutters – 4.8mm & 6.4mm 2 ovolo cutters 6.4mm & 9.5mm One...
£295.00 (VAT exempt)
Jointer Plane and a Smoothing Plane [Pre-owned, SOLD]Jointer Plane and a Smoothing Plane [Pre-owned, SOLD]
Sold
Jointer Plane and a Smoothing Plane [Pre-owned, SOLD]
A very nice Record No.7 (made in England) and a Stanley Bailey 4 ½ - pre-owned both with beech handles. These are good quality examples of older planes which have been well cared for. Both have 2 3/8” wide irons with plenty of wear left in them. A commission sale.
£150.00 (VAT exempt)
Stanley Double Sided Rebate Plane – No.79 [Vintage, SOLD]Stanley Double Sided Rebate Plane – No.79 [Vintage, SOLD]
Sold
Stanley Double Sided Rebate Plane – No.79 [Vintage, SOLD]
A very crisp example of this classic little side rebate pane with original parts and good cutter life left. A nice little plane. Made in England. This plane is designed to help with accurately trimming dados, grooves and mouldings. The body houses two skew cutters set at a very low angle. 5 ½” overall. It also has a reversible nose for each side to allow for closer corner...
£65.00 (VAT exempt)
ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]
Sold
ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]
ECE brand beech plane with a convex sole (side to side, not front to back like a compass plane) for making channels. This plane has not been used and presents as new in its orginal box. A commission sale. 240mm x 70mm overall with 50mm convex blade.
£75.00 (VAT exempt)
Handsome Wooden Smoothing Plane with Hock blade [Pre-owned, SOLD]Handsome Wooden Smoothing Plane with Hock blade [Pre-owned, SOLD]
Sold
Handsome Wooden Smoothing Plane with Hock blade [Pre-owned, SOLD]
Fraser like! This handsome plane needs to be put to work (just like Fraser!)
£75.00 inc VAT
Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned, SOLD]Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned, SOLD]
Sold
Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned, SOLD]
This plane is a Stanley Bailey 4 ½ smoother that has a black japanned body and frog with stained beech replacement handle with high front knob (see trade label) and lever cap from Record . It also has the considerable benefit of a hand forged 2 3/8” wide replacement blade by Clifton, Sheffield. It also has a Hock cap iron. So, one very good plane made up of 4 famous names. A good...
£85.00 (VAT exempt)
Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]
Sold
Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]
Complete with hot dog handle (which currently retails for £92) and the cherry side handle. So this is an earlier No.9 as the cherry handle was replaced over time for the hot dog option. With this purchase you get both! This discontinued plane from heirloom hand tool maker Lie-Nielsen Toolworks has been well cared for by a long-standing customer of Classic Hand Tools. We have sold 4 of these...
£665.00 (VAT exempt)
Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]
Sold
Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]
This plane probably dates from about the 1980’s and is in very good condition. There is relatively little wear to the sole and all the things to check for in these planes have all passed (the sole moves freely, no cracks in the casting, all original parts, mouth rivets are not proud of the sole, the lateral blade adjuster works properly, full convex and concave range etc etc).
£105.00 inc VAT
Japanese Marking & Layout Tool Bundle [Pre-owned, SOLD]Japanese Marking & Layout Tool Bundle [Pre-owned, SOLD]
Sold
Japanese Marking & Layout Tool Bundle [Pre-owned, SOLD]
White oak marking gauge with matching double marking (mortise) gauge, a small awl, a marking knife and a wooden hammer. 5 separate tools all in G++ condition.
£60.00 inc VAT
2 Spokeshaves [Vintage, SOLD]2 Spokeshaves [Vintage, SOLD]
Sold
2 Spokeshaves [Vintage, SOLD]
8” beech bodied spokeshave with1 ½” straight blade, in good order. Stamped Parry & Son 359 Old St. with the Sundial logo. An adjustable mouth beech bodied spokeshave with brass adjusting knobs and curved wear strip to the sole which houses the 3” blade. No cracks, Made by J. Frost Norwich, England. 11 1/2” overall. J.Frost, Norwich dates from 1864-1892. Both...
£65.00 inc VAT
Adze Head [Vintage, SOLD]Adze Head [Vintage, SOLD]
Sold
Adze Head [Vintage, SOLD]
A little used adze head (makers mark indistinct) The blade is curved, 70mm across. The adze is 240mm overall with a short pin. Rectangular tapered poll 45mm x 30mm reducing to 38mm x 26mm. The sweep is as showed on the photo. (Medium to tight)
£35.00 inc VAT
Stanley No.6 Jack Plane & Record 4 ½ Smoother [Vintage, SOLD]Stanley No.6 Jack Plane & Record 4 ½ Smoother [Vintage, SOLD]
Sold
Stanley No.6 Jack Plane & Record 4 ½ Smoother [Vintage, SOLD]
These pre-owned planes are in good usable condition. Wooden handles, high front knobs. English made. The soles are flat. They would suit for occasional use or as a budget friendly alternative to buying new. In our opinion they are superior to current Stanley and Record models. These probably date from the 80’s. There is plenty of life left in the blades (but you can always upgrade with...
£85.00 inc VAT
Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]
Sold
Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]
Oooh! – this is magnificent. 2 ¼” edge, an impressive 20” overall with a long handle (7 ½”) & 1 5/8” brass ferrule. We think the handle and ferrule may not be original, but this doesn’t distract from the overall appeal of this monster. It has been sharpened and for a chisel that is possibly 125 years old it is in superb condition. No pitting...
£125.00 (VAT exempt)
Record 05 SS Jack Plane [Vintage, SOLD]Record 05 SS Jack Plane [Vintage, SOLD]
Sold
Record 05 SS Jack Plane [Vintage, SOLD]
With stained beech handles, this Stay-Set (SS) version of the No.5 jack plane is in excellent condition. Stay set refers to the 2-piece cap iron which makes the sharpening of the iron somewhat quicker as you do not have to disassemble the plane iron assembly. Dating from 1950 – 1965 2” wide blade. 1 ½” original iron remains. This may have been refurbished...
£75.00 (VAT exempt)
Marples M6 Jack Plane [Vintage, SOLD]Marples M6 Jack Plane [Vintage, SOLD]
Sold
Marples M6 Jack Plane [Vintage, SOLD]
This Marples jointer plane has a 2 3/8” wide blade (original with correct cap iron and 1 ¾” left in the blade). A few scratches to the distinctive cherry red japanning. Nice handles (rosewood – we think). 18” overall Dating this plane is fun, which we will leave to you (suffice to say we think post 1940). Do your detective work here at this superb William...
£85.00 (VAT exempt)
3 Lovely Vintage Brass Backed Saws [Vintage]3 Lovely Vintage Brass Backed Saws [Vintage]
Sold
3 Lovely Vintage Brass Backed Saws [Vintage]
Refurbished to a high standard. E C ATKINS 13tpi X- CROSS CUT TENON SAW – DEEP BRASS BACK 14” BLADE – attractive closed handle with ATKINS medallion FROST DOVE STREET NORWICH – SPECIAL – 18tpi DOVETAIL SAW 9” BLADE, CLOSED BEECH HANDLE 12” SPEAR & JACKSON 13tpi X – CUT “Leapfrog” tenon saw All straight bladed. A lovely collection. A...
£99.00 (VAT exempt)
E.C.E Wooden Plane [Pre-owned, SOLD]E.C.E Wooden Plane [Pre-owned, SOLD]
Sold
E.C.E Wooden Plane [Pre-owned, SOLD]
E C Emmerich Smoothing Plane - 48mm wide blade – Pre-owned We think this has not been used as it presents as new. Lacquered beech body with steamed beech sole. Wooden wedge. Made in Germany. A commission sale.
£80.00 (VAT exempt)
The Ward Collection – 4 Chisels & A Gouge [Vintage, SOLD]The Ward Collection – 4 Chisels & A Gouge [Vintage, SOLD]
Sold
The Ward Collection – 4 Chisels & A Gouge [Vintage, SOLD]
4 chisels and a magnificent gouge, all by Ward, Sheffield Ward & Payne 1 1/2” wide Firmer Chisel Refurbished 1 ½” wide chisel by Ward & Payne, Sheffield. Attractive London pattern boxwood handle and brass ferrule. Blade is 7” long, 16” overall. 1 ¼” wide bevel edge paring chisel by WARD W & P. Waisted round hardwood...
£125.00 (VAT exempt)
1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]
Sold
1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]
This is perfectly functional chisel which has been refurbished nicely to include a replacement boxwood London Pattern Octagonal handle. 1” wide, bevel edged, the tang is cranked so to allow for knuckle clearance whilst paring. 13 1/2” overall. (Note - it is difficult to find a new equivalence to give you a price guide, however a shorter bevel edge cranked 1” wide chisel from...
£42.00 (VAT exempt)
Bristol Design Thumb Plane [Pre-owned, SOLD]Bristol Design Thumb Plane [Pre-owned, SOLD]
Sold
Bristol Design Thumb Plane [Pre-owned, SOLD]
A very attractive plane. 5” long x 1 ½” wide with a 11/4” wide blade Steel sole to gunmetal sides Ebony infill Brass lever cap and knurled screw A few blemish marks. The rear left cheek has been resting against something in a tool box. This has caused some discolouration (see photo) and a few pin prick holes in the metal over maybe 1cm. Originally, we...
£145.00 (VAT exempt)
RARE - 7 Cooper & Sons FULUSE Brand Chisels [Pre-owned, SOLD]RARE - 7 Cooper & Sons FULUSE Brand Chisels [Pre-owned, SOLD]
Sold
RARE - 7 Cooper & Sons FULUSE Brand Chisels [Pre-owned, SOLD]
5 FULUSE bevel edge & 2 FULUSE firmer chisels, all with makers stamp or label on the handle. 3/16”, 3/8”, 5/8”, 1” & 1 3/8” FULUSE bevel edge chisels. 2 FULUSE registered firmer chisels – ¼” & 11/16” Made from superior forged high carbon steel by Sheffield maker Cooper & Sons who were in existence from 1930’s and...
£99.00 (VAT exempt)
Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage, SOLD]Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage, SOLD]
Sold
Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage, SOLD]
Despite many years of handling various gauges, we hadn’t seen this particular gauge before so we enjoyed playing with the adjustable tilting head. The clear patent dates on the reverse of the fence led us to the maker BATES of BLOOMSBURG OCT 20 1896, USA Link to patent source notes Directory of American Tool and Machinery Patents Jim Bode sold one of these in the not-too-distant...
£68.00 (VAT exempt)
Norris A17 Smoother Plane [Rare, Vintage, SOLD]Norris A17 Smoother Plane [Rare, Vintage, SOLD]
Sold
Norris A17 Smoother Plane [Rare, Vintage, SOLD]
This is a commission sale of a rare A17 Norris coffin shaped smoother. Gunmetal sides with sweated steel sole and steel pins. Attractive rosewood infill which needs a very light cleaned to get rid of a few grimy marks, paint splatter etc. The rosewood will respond delightfully and hopefully the photographs already do justice to the rich rosewood colour. No major scratches or blemishes to...
£1,750.00 (VAT exempt)
Old Grannies Tooth Router [Pre-owned, SOLD]Old Grannies Tooth Router [Pre-owned, SOLD]
Sold
Old Grannies Tooth Router [Pre-owned, SOLD]
This tool is larger than your usual granny. She measures 240mm x 90mm x 65mm She has 10mm, 12mm, 14mm, 16mm & 18mm wide straight blades which are currently crudely sharpened and would benefit from being refined (not a difficult task). Not elegant or refined like most grannies but adorable nevertheless!
£30.00 inc VAT
Carpenter’s Adze Head - Brades & Co No.385 [Vintage, SOLD]Carpenter’s Adze Head - Brades & Co No.385 [Vintage, SOLD]
Sold
Carpenter’s Adze Head - Brades & Co No.385 [Vintage, SOLD]
This is in G++ condition. Carpenter’s Adze Head - Brades & Co No.385
£30.00 inc VAT
Sargents Woodscrew Sets (5/8'', 3/4'' & 1'') [Vintage, SOLD]Sargents Woodscrew Sets (5/8'', 3/4'' & 1'') [Vintage, SOLD]
Sold
Sargents Woodscrew Sets (5/8'', 3/4'' & 1'') [Vintage, SOLD]
Vintage screw boxes, for cutting thread onto wooden dowels. To cut 5/8”, ¾” & 1” diameter threads on dowels. With taps in original boxes. Made in England.
£85.00 inc VAT
ECE Dovetail Plane [Pre-owned, SOLD]ECE Dovetail Plane [Pre-owned, SOLD]
Sold
ECE Dovetail Plane [Pre-owned, SOLD]
This is a beech bodied plane with a hornbeam sole from German maker E C Emmerich, founded in Germany in 1852. The skew blade is wedged with adjustment made by striking the strike button at the rear of the plane to loosen the wedge before tapping the iron to adjust depth. A simple thumbscrew loosens the knicker iron for adjustment. There is little wear to this plane, and the strike button shows...
£75.00 inc VAT
Japanese Mortise Chisel – 12mm wide [Pre-owned, SOLD]Japanese Mortise Chisel – 12mm wide [Pre-owned, SOLD]
Sold
Japanese Mortise Chisel – 12mm wide [Pre-owned, SOLD]
A stout fella but with 80mm of blade left, enough for the building of a temple or two. 245mm overall. Red Oak handle. Steel strike hoop and ferrule. Little used. Makers stamp but we can’t identify the maker.
£24.00 inc VAT
IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned, SOLD]IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned, SOLD]
Sold
IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned, SOLD]
Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
£295.00 inc VAT
Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]
Sold
Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]
This was a commission plane for an English customer. The plane is a skewed rebate plane with a 1 3/16'' blade set in a 1 7/8'' wide body with a full width fence that is ¾'' deep. The plane is 9 ¼'' long. It has a nicked iron as shown in the photograph and a full length brass wear strip. Philly Planes stamped on the front of the plane. We can...
£250.00 inc VAT
Philly Planes – 24'' Jointer Plane [Pre-owned, SOLD]Philly Planes – 24'' Jointer Plane [Pre-owned, SOLD]
Sold
Philly Planes – 24'' Jointer Plane [Pre-owned, SOLD]
60mm wide with 4mm thick tombstone shaped blade. Designed to make things flat! This plane has done next to no work. Beech, lovely handle, gentle chamfering. ''PHILLY PLANES MADE IN ENGLAND'' Stamped on the front of the plane. (Also, the initials CWW)
£250.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 |