Sort By
Per Page
View
Grid
List
Optional Depth Stop for Veritas Skew Block Plane
For use with the skew block plane, this depth stop lets you finish cuts at a precise depth.
The cast zinc-aluminum alloy arm is held in place by the front knob. The steel shoe is adjustable from flush to a maximum depth of 5/8" and has relieved edges to avoid marking your work.
Made in Canada.
Pair of Mounting Knobs for Veritas Universal Variable Angle Fence
A pair of stainless-steel knobs for mounting the Veritas universal variable angle plane fence to the bevel-up jointer, jack rabbet and shooting planes.
Made in Canada.
Preston Replacement Spokeshave iron
This Ray Iles replacement iron fits the Preston Adjustable Spokeshave.
Made from of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C.
Ray Iles 1 5/8' Stanley & Record Block Plane Blade
Designed for the older Record 09½, 015, 016, 017, 018, 019, 0120 and 0220. Stanley 9½, 9¾, 15, 15½, 16, 17, 18, 19, 118, 220 and A18.
Width: 1-5/8"
Length: 4-1/4"
High grade carbon steel hardened to 59 - 61 Rockwell C.
Ray Iles 1 3/8'' Modern Stanley Block Plane Blade
Designed for the modern Stanley 60½ Block Plane
Width: 1 3/8''
Length: 4 3/8''
High grade carbon steel hardened to 59 - 61 Rockwell C.
Ray Iles 1 3/8'' Stanley & Record Block Plane Blade
Designed for the older Record 0230. Stanley 60, 60½, 61 and 103.
Width: 1 3/8''
Length: 4 3/8''
Thick: 3mm (1/8'')
High grade carbon steel hardened to 59 - 61 Rockwell C.
Ray Iles 1 5/8'' Modern Stanley Block Plane Blade
Designed for the modern Stanley 9½ Block Plane
Width: 1 5/8''
Length: 4 1/2''
High grade carbon steel hardened to 59 - 61 Rockwell C.
Ray Iles Replacement Irons
Ray Iles produces these replacement O1 carbon steel blades for your bench plane (see also blades for block planes, spokeshaves & special purpose planes).
These blades (irons) are 50% thicker than standard irons and manufactured from 01 high carbon, oil hardened tool steel. They are designed to fit Stanley Bailey & Bedrock designs as well as Record & Preston bench planes. The extra thickness...
Record 044 Plough Plane Replacement Irons RI012
Set of eight cutters (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 9/16") for Record 044 Plough Plane.
Replacement Blade for Clifton Low Angle Block Plane
1 5/8'' blade to fit the Clifton low angle block plane.
The Clifton blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C.
Made in Sheffield, UK
Slow Adjuster for Veritas Bevel-Up Planes - Type A
The fine thread on this Norris-style adjuster slows blade advancement, making it easier to set blade projection precisely. An easy retrofit, it simply replaces the regular adjuster supplied with our bevel-up planes.
Two versions are available. This type fits the bevel-up smoother, bevel-up jointer, low-angle jack, low-angle smooth and low-angle block planes.
Made in Canada.
Spare PM-V11 Blade for Veritas Bullnose Shoulder Plane
Replacement PM-V11 blade for the Veritas bullnose shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Large Shoulder Plane
Replacement PM-V11 blade for the Veritas large shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Medium Shoulder Plane
Replacement PM-V11 blade for the Veritas medium shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Small Shoulder Plane
Ensure your Veritas Small Shoulder Plane continues to deliver exceptional results with this premium PM-V11 replacement blade. Known for its outstanding durability and ability to maintain a razor-sharp edge, the PM-V11 steel blade is the perfect upgrade for those who demand the highest performance from their tools.
Key Features:
Premium Material: Crafted from PM-V11 steel, known for its superior...
Stanley 66 Replacement Irons
This replacement cutters fit the Stanley No.66 hand beader. Set of 8, as per original pattern.
These replacement irons are made of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C and will have edge keeping qualities equal to the originals.
Veritas 2 1/4'' Blades for Bevel-Up and Low-Angle Bench Planes
2 1/4" blades that fit the Veritas Bevel-Up Smoother, Low-Angle Jack, Bevel-Up Jointer. Also fits the Shooting Board Plane (25° bevel).
Veritas Bevel-Up Jointer Fence
The Veritas low-angle jointer fence enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer. The 11" long anodized aluminium fence can be attached to either side of the plane with the brass thumbscrews provided; a set screw can be adjusted to square the fence to the sole.
As supplied, the 2" tall guiding face can be used to plane edges perfectly...
Veritas Chamfer Guide for Low-Angle Block Plane
You can convert the Veritas Low-Angle Block Plane (05P22.01) and Standard Block Plane (05P22.30) into chamfer planes in seconds with this cunning guide.
Easy to install - you first set the chamfer width on the guide, then install the guide by unscrewing the front knob of the plane, replacing the toe piece with the chamfer guide and tightening the knob again. It is ready to go.
Adjustable for...
Veritas Jointer Fence
Planing a square edge on a board requires a jointer fence, whether you are using an electric jointer or a hand plane.
The Veritas® jointer fence allows you to shoot accurate and consistent square or bevelled edges with most* iron or steel bench planes. The integral rare-earth magnets make it quick and easy to attach or remove the 11" long anodized aluminium fence from either side of all...
Veritas Plane Screwdriver
A regular screwdriver just doesn't work well on cap iron screws. A narrow blade can mar the cap-screw slot, and there's always the risk that the screwdriver tip will slip out of the slot altogether. Veritas have designed this screwdriver to make it both safe and easy to remove, replace or adjust cap irons.
It has a turned brass collar surrounding the tip to capture the head of a cap iron screw...
Veritas Universal Variable Angle Plane Fence
Designed to fit a wide array of bench planes, including those made by some other manufacturers, this variable angle fence can be used left or right. Not just for right angles, the fence allows you to plane accurate and consistent angles from 45° to 135°.
Angles are set using a square or angle gauge, or directly on an angle you wish to match. A spring-loaded lever locks the fence and can...
Veritas Variable Angle Fence for Rebate Planes
This plane fence doesn't limit you to right angles - it allows accurate and consistent planing of any angle from 45° to 135°.
Angles are set using a square or angle gauge, or directly on an angle you wish to match.
The spring-loaded lever, which locks the fence, can be rotated out of the way if necessary.
Through-holes in the 11" long aluminium fence allow the attachment of a wooden...
Veritas Wooden Plane Hardware Kit + PM-V11 Blade
With this kit (and basic woodworking skills) you can build a bevel-down wood-bodied smooth plane with a Norris-style mechanism for easy depth and lateral adjustment.
The kit includes a blade, a Norris-style adjuster with a steel cup to seat it in, plus a knob, tapped insert and cross pin for the lever cap, all made of brass. The lapped PM-V11 blade is 1/8" thick and 1 5/8" wide with...
Hock 3 1/2'' Radius-Edge Krenov-Style Plane Assemblies
The Hock 3 1/2" Radius-Edge Krenov-Style Plane Assemblies are designed in collaboration with James Krenov's Fine-Woodworking studio in Fort Bragg USA. These blades are 3/16" thick and come in sizes ranging from 1 1/4" to 1 3/4", with a 30° bevel. Made from high carbon steel, they include a chip breaker and assembly screw.
Hock 4 1/2'' Straight-Edge Krenov-Style Plane Assemblies
The Hock 4 1/2" Straight-Edge Krenov-Style Plane Assemblies are designed for use in wooden planes inspired by the James Krenov style. Available in sizes from 1" to 2", the blades are made from high-carbon steel and are 3/16" thick, offering durability and reducing deflection during use. The assemblies include a chip breaker and cap iron for enhanced performance in fine woodworking...
Hock Block Plane Kit
Here Ron Hock offers a small version of their ever-popular Krenov-style wooden plane kit. This handy Block Plane comes with a 1" wide blade, ends up 5¾" long and trims down to 5" or less depending on your needs. Jatoba body.
Hock Scraper Plane Kit
The Ron Hock Scraper Plane Kits are precision-made from jatoba. The O1 Hock blade is bedded at 95° and hardened to Rc58 for burr "rollability".
The parts are taller than their Krenov-style Plane Kit to allow for necessary blade access and a comfortable grip.
1 3/4" Iron Width x 11" Finished Length
Hock Shoulder Plane Kit
The Shoulder Plane Kit is precision-made from beech and jatoba for beauty, performance and durability. This easy-to-assemble kit requires a only drill (for the locator dowels), some glue and clamps, and some fine tuning and shaping to complete. The bevel-down blade is bedded at 37.5° for low-angle end-grain planing of shoulders. 3/4" Tee Blade (#SH075) is included.
Hock Spokeshave Kit
Ron Hock has done all the cutting for their jatoba Spokeshave Kit - you just have to glue in the brass wear-strip and shape the handles to suit your hands. All the parts are included: depth-adjuster set screws, brass thumb screws to secure the blade and a HOCK blade (SP062S).
A fun, simple and affordable way to add a wooden spokeshave to your tool chest.
Hock Wooden Spokeshave Blades
These are the two-threaded-post style carbon steel blades and yes, the brass thumbnuts are included.
The small blade has a 11/2" cutting edge and is 2 1/2" by 7/16" overall.
The larger blade has a 2 3/4" cutting edge and is 4 7/16" x 5/8" overall.
Hock Woodworking Plane Kit
Ron Hock's precision made kit provides a quick, sure way to realize the satisfaction of using a handmade wooden plane. Complete with a HOCK PLANE-IRON ASSEMBLY all you need is a drill, some clamps, glue, a knife to adjust the throat, sandpaper (or plane) to true the sole, and a means of sharpening the iron.
A HOCK plane kit is ideal for the novice as well as the professional woodworker who can't...
Veritas Hardware Kits for Wooden Spokeshaves
Traditional wooden spokeshaves are still popular tools, despite modern alternatives that offer better control over depth of cut.
Typical spokeshave blades have tangs that wedge into holes in the tool body. Cut depth is adjusted by tapping the tang ends or the base of the blade. Many users find ways to refine this haphazard process, but most require a screwdriver or other tool, or the blade must...