Sort By
Per Page
View
Grid
List
Veritas Miniature Router
This 75mm wide router plane not only looks like its full-size counterpart, it works like it too. Comfortable to hold and manoeuvre, it is ideal for hardware installation, fine inlay or intarsia work.
It comes with a 3.2mm wide A2 tool-steel blade (hardened to HRC 60-62), positioned inboard for standard use or outboard for true bullnose work. The carefully machined stainless steel body has a ground...
Blades for Lie-Nielsen 271 Small Router
For use in the Lie-Nielsen No. 271 Small Router Planes. Made from O1 Tool Steel.
The Small Router Plane comes with a 1/4" wide square tip blade (this blade).
There are three specialty blades designed for inlay work are also available:
1/4" Pointed Tip
3/32" Pointed Tip
3/32" Square Tip (this one)
Spare Blade for Lie-Nielsen Large Router Plane
Replacement blade for the No. 71 Large Router Plane.
* 3/8" square tip
* O1 Tool Steel
Note: Blade does not work in vintage Stanley planes
Small Blade Adapter for Lie-Nielsen Large Router Planes
This adaptor enables you to use the specialty blades for the Small Router Planes in the Large Router Planes.
Veritas Narrow Router Plane Blades
These high-carbon steel router plane blades fit the Veritas large and merdium router planes, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in both metric and imperial sizes.
Please note that Veritas do not produce a 3mm and a 1/8" blade, they consider them close enough in size so we only advertise the 1/8".
Sizes...
Veritas Wide Router Plane Blades
These high-carbon steel router plane blades will fit the Veritas large and medium router planes, and the the Veritas hinge mortise plane, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in five Imperial sizes
The 1/2" blades have a two-piece design and are available in two styles: straight and spear-point (for final...
Veritas Fence for Large Router Plane
A very popular addition to the Veritas large router plane. Can be positioned on either side of the plane and will work on both straight and curved pieces.
Veritas Inlay Cutter Head for Router Plane
This simple attachment for a lets you score a shallow groove to accept inlaid purfling, banding or stringing, taking advantage of the plane’s fence and depth-adjustment mechanism to precisely control groove position and depth.
The cutter head holds a pair of included single-bevel slicing blades that score crisply defined groove outlines across, with or diagonal to the grain. By using a chisel...
Replacement 1/4' Blade for Veritas Small Router
Veritas Replacement 1/4" wide high-carbon steel blade for the .
Made in Canada.
Clifton 770 Bull Nose Plane
The Clifton 770 Bull Nose plane is made to the exacting specifications as all the other Clifton planes. The 770 fulfills the need for a straight-forward bull nose plane enabling the user to plane close to an abutting section of wood and avoiding tear-out. It is a light handy plane often used for cutting rebate stop shoulders. The cutting iron fits smoothly onto the machined pad in the body and can...
Lie-Nielsen No.041 Small Shoulder Plane
This is the smallest of the Lie-Nielsen "Preston style" shoulder planes, 5/8" wide, 5 3/4" long. The blade is 0.140" thick, and the tool weighs 1.35 lbs.
With an adjustable mouth like its larger siblings, this tool is just right for trimming and fitting small tenons, dadoes and rebates.
Replacement Blades are available here
Clifton No. 410 Shoulder Plane
The Clifton 410 Shoulder Rebate Plane fills the need for a narrow light and accurate shoulder plane. The cutting iron fits smoothly onto the machined pads in the body and can be finely adjusted by means of a screw..
Cutter: 11/16" (18mm) wide
Length of plane: 5.1/2" (138mm)
Approximate weight: 1.1/4"lbs (0.58kg)
Made in Sheffield, UK
Veritas Bullnose Shoulder Plane + PM-V11 Blade
The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll ever own.
Designed for maximum versatility, it performs as either a bullnose or a chisel plane as required. Simply loosen the brass toe-locking knob to remove the toe piece for chisel plane configuration, and you can work right up to a blind corner. An adjustable...
Clifton No. 420 Shoulder Plane
The Clifton 420 Shoulder Rebate Plane fills the need for a light accurate shoulder plane.
Cutter: ¾" (19mm) wide
Length of plane: 8" (200mm)
Approximate weight: 2/1/2" (1.1kg)
Made in Sheffield, UK
Veritas Small Shoulder Plane + PM-V11 Blade
Designed to seat nicely in the hand, the smallest Veritas shoulder plane is easily controlled using a one-handed grip.
The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest for the palm.
The through-hole and textured recesses cast into the side of the body provide grip points for fingers.
The...
Lie-Nielsen No.042 Medium Shoulder Plane
A improved version of the now discontinued Record 042. This plane is 3/4" wide and weighs 2.35 lbs. The body is 9¼" long, with a 3/4" x .140" thick blade.
This is an elegant tool for trimming and fitting tenons, dados and rebates.
!!!!
Veritas Miniature Shoulder Plane
Weighing a mere 1.7 oz and measuring 2-1/2" long by 1/4" wide, this miniature version of the Veritas medium shoulder plane was developed out of a desire to test the limitations of their materials, design, and manufacturing processes (not to mention the patience of their engineers!).
Despite its diminutive size, it is fully functional and remarkably effective for fine trimming or cleaning the bottoms...
Veritas Medium Shoulder Plane + PM-V11 Blade
The shoulder plane (a specialized rebate plane) is the ultimate tool for trimming a joint to a perfect fit. There is no better plane for trimming the shoulder of a tenon to perfection or for rebating work.
The Veritas® medium shoulder plane is proportioned for versatility; it measures 7" long by 0.700" wide and weighs 2 lb. The ductile cast iron body is accurately machined and ground so that...
Lie-Nielsen No.073 Large Shoulder Plane
A versatile, general purpose Shoulder Plane with nice heft and the best size to start with. This all-metal Shoulder Plane is based on the Record 073, which in turn was based on a Preston model.
The Bronze lever cap is higher for better grip and closer to the blade bevel for better support. The mouth geometry allows for better chip clearance, while the adjustable mouth and locking screws are large...
Clifton No. 3110 Plane
The Clifton 3110 is a classic 3 in 1 plane. Remember the Record 311?, well this surpasses that out of production plane. This plane can be used as a shoulder plane, adjustable mouth bull nose or chisel plane. As a shoulder plane, the front extension piece is fitted, as a chisel plane all nose pieces are removed; and as a bull-nose plane, the thinner nose piece is fitted in conjunction with one or both...
Veritas Large Shoulder Plane + PM-V11 Blade
The Veritas® large shoulder plane (a specialized rabbet plane) is the latest and largest in our line of shoulder planes. Its size and mass make it perfect for trimming breadboard tenons, adjusting shoulders, or even paring down tenon cheeks. At 8¼" long, 1¼" wide and weighing 3¾ lb, it brings both authority and precision to larger work. The ductile cast iron body is accurately machined and ground...
Clifton No. 400 Shoulder Plane
The Clifton 400 Shoulder Rebate Plane has a fine mouth for cabinetmakers and those more demanding woodworkers wanting fine shavings in their precision work. Adjustment of the cutting iron is done in the traditional manner by tapping the end of the cutting iron and locking the Rosewood wedge in place.
Cutter: 7/16" (11mm) wide
Length of plane 3.1/8"
Made in Sheffield, UK
Replacement Blade for Clifton No. 3110 Plane
This blade is for the Clifton 3110, a classic 3 in 1 plane.
Cutter: 1.1/8" (29mm) wide
Made in Sheffield, UK
Replacement Blade for Clifton No. 400 Shoulder Plane
A replacement blade for the Clifton 400 Shoulder Rebate Plane.
Adjustment of the cutting iron is done in the traditional manner by tapping the end of the cutting iron and locking the Rosewood wedge in place.
Cutter: 7/16" (11mm) wide
Made in Sheffield, UK
Replacement Blade for Clifton No. 410 Shoulder Plane
Blade for the Clifton 410 Shoulder Rebate Plane.
The cutting iron fits smoothly onto the machined pads in the body and can be finely adjusted by means of a screw..
Cutter: 11/16" (18mm) wide
Made in Sheffield, UK
Replacement Blade for Clifton No. 420 Shoulder Plane
Blade for the Clifton 420 Shoulder Rebate Plane.
Cutter: ¾" (19mm) wide
Made in Sheffield, UK
Veritas Hand Jointer
The Veritas Hand Jointer allows you to accurately joint small parts by hand.
Box-making and modelmaking often require small parts that are too dangerous to run through a power jointer and difficult to joint with a hand plane; balancing a plane on pieces much smaller than its sole can be awkward.
This hand jointing accessory for Veritas medium and large shoulder planes lets you bring the work...
Veritas Skew Rabbet + PM-V11 Blade
Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts are clean and accurate.
Adjustable in two axes (vertical and horizontal) for depth and projection, the scoring spur sits...
Veritas Side Rabbet Plane
The Veritas Side Rabbet Plane is used for cleaning up or trimming sidewalls of rabbets, dadoes or grooves to yield a perfect fit with its mate. It has a practical dual-blade configuration, coupled with an ingenious pivoting handle that permits right- or left-hand use to accommodate grain direction.
The thin sole functions much like a skate, allowing use in slots as narrow as 3/16" and to a depth...
Veritas Jack Rebate Plane + PM-V11 Blade
This Veritas Jack Rebate plane cuts large-scale rebating down to size. The body is 385mm long and the blade extends the full width (57mm) of the body. It is suitable for very large rebates and fielded or bevelled panels. The long sole and substantial mass help ensure accuracy.
The 4.8mm thick bevel-up blade makes right or left-handed corner cuts cleanly and accurately. Adjustable scoring spurs...
Veritas Detail Rabbet Plane
The detail rebate plane is primarily useful for small trimming tasks. It is handy for getting into tight spaces, especially cleaning up the bottom of dados or grooves. The plane’s body is ductile cast iron, 75mm long, accurately machined and ground. The sides are flat and square, allowing you to use the plane on its side for trimming tenons. The low 15-degree bed angle combined with the 30-degree...
Veritas Shooting Plane + PM-V11 Blade
The mass of this Veritas Shooting Plane, its long base and low centre of gravity make it both stable and effective. Tipping the scales at just over 3.5kg and just under 400mm long, it is a substantial plane; you will appreciate the authority it provides when shooting.
The body is fully stress-relieved, ductile cast iron, with a sole and running surface machined flat and square to one another;...
Lie-Nielsen No.51 Shooting Board Plane - Right Hand
The Lie-Nielsen Shooting Board Plane is a single purpose plane is designed to trim mitres and other end grain cuts on a shooting board. Stanley first made its version in 1909 along with a metal shooting board. Lie-Nielsen had many requests for this tool over the years, so we are pleased they redesigned the Stanley version.
The Lie-Nielsen version utilises a standard 60mm (2.3/8") bench plane...
Veritas Shooting Board
The 24" long shooting track fits the Veritas shooting plane.
This is a shooting board that doesn’t limit you to one angle, the fence is adjustable to let you shoot up to 60° from square. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly set the fence for square angles as well as miter cuts to produce frames with ten,...
Veritas Shooting Board Fence
The Veritas Shooting Board Fence Kit lets you construct a shooting board that doesn’t limit you to one angle – the fence is adjustable to let you easily shoot mitres of various angles. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly adjust the fence to shoot square angles as well as mitres for frames with ten, eight,...
Veritas Shooting Board Track
These are straight, durable aluminium tracks for making your own shooting board. They are designed to fit the Veritas Shooting Plane, and any other plane with a running surface between 2-1/32" and 2-1/4" wide; you can adjust the stainless-steel outer rail for a perfect fit. Set screws keep the rail from shifting in use.
The inner rail is 11/64" tall. Low-friction UHMW strips in the...
Blade for the Veritas Small Scraping Plane
Replacement blade for the Veritas Small Scraping Plane 05P2950.
Veritas No.80 Style Cabinet Scraper
This cabinet scraper is a very useful and versatile tool. Used in place of a much heavier belt sander, it can clean a dirty workbench top, remove dried glue and smooth a panel or tricky grain table top efficiently, leaving behind a surface free of tear-out, digs or gouges.
Veritas have designed this tool with several improvements over what is usually known as the No.80 cabinet scraper. To allow...
Veritas Small Scraping Plane
The Veritas Small Scraping Plane is a great tool for the final smoothing of small, flat surfaces, even highly figured timber, or small areas of difficult grain within a larger surface.
The scraping plane comes into action after the surface has been prepared as well as possible using a finely tuned smoothing plane. What the scraping plane does is to replace the need for sanding prior to applying...
Lie-Nielsen No. 212 Small Iron Scraping Plane
Please note that this is the iron version, the bronze version is temporarily unavailable.
Scraping Planes are used for finishing woods that do not yield well to the hand plane. A scraping plane is more comfortable to use than a hand scraper, and a plane body helps you keep the surface you are scraping flat.
They can be tricky to master, however. To make it easier, Lie-Nielsen do not recommend...
Veritas Miniature Cabinet Scraper
This cabinet scraper is the latest addition to Veritas' line of fully functional miniature tools. At about 1/3 the scale of the full-size tool, it measures 3-13/16" wide overall and weighs about 1-1/2 oz. Its small size allows fine control when smoothing surfaces.
The 15/16" wide blade, made of spring steel and ground at a 45° angle, is held at a consistent depth and angle. A thumbscrew lets...
Veritas No.112 Style Scraping Plane
The Veritas® scraping plane is the ideal tool for final smoothing, especially when you have to deal with highly figured wood or reversing grain. With a well-sharpened blade and light cuts you can achieve excellent results on any wood. Tear-out is virtually eliminated with the cutting action of the included scraping blade. The adjustable frog enables blade angles from 0° to 25°, providing fine...
Veritas Scraper Shave
The Veritas Scraper Shave is a versatile small scraper suitable for small-scale work, fine detailing, or any application where a normal scraping plane would be too large.
The design of the tool allows a controlled scraping action that effectively smoothes the workpiece. Can be used as a companion tool with the chair devils for smoothing of non-round chair parts such as crest rails, arm bows and...
Blades for the Veritas Scraping Plane
Blades for the Veritas large scraping plane 05P2901.
Lie-Nielsen Scrub Plane
This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane.
It is also useful practical for shaping irregular objects or creating an interesting finished surface.
The Lie Nielsen Scrub Plane has a cast Iron body, 10¼" long. The blade is massive...
Veritas Scrub Plane + PM-V11 Blade
The scrub plane is the tool of choice for major stock removal, the first step when flattening rough stock by hand. Much like a low-angle smooth plane, a scrub is not usually used parallel to the grain, but at an angle of 30° or more. The blade edge is ground with a 3" radius, so that it takes an aggressive cut. This is the tool you use to get stock into a condition where you then can use a...
Veritas Combination Plane
Originally created to replace stacks of hollow and round wooden planes, combination planes are defined by their flexibility. The Veritas® Combination Plane is no exception; only this one is designed with better adjustment and feed mechanisms for easy and accurate blade setting, and incorporates features to prevent blade vibration, making it reliable in use. It will tackle fundamental joinery,...
Veritas Small Plough Plane
This is Veritas' redesigned small plough plane. While it still excels at cutting grooves, rabbets and tongues, it now has the ability to cut decorative beading (beading blades available soon).
Closest in size to the classic Record #044 plane, the preferred size of the old-style plough planes, it has a 6-5/8" long fence that registers solidly to the workpiece and is through-drilled to...