Sort By
Per Page
View
Grid
List
Veritas Scraper Shave
The Veritas Scraper Shave is a versatile small scraper suitable for small-scale work, fine detailing, or any application where a normal scraping plane would be too large.
The design of the tool allows a controlled scraping action that effectively smoothes the workpiece. Can be used as a companion tool with the chair devils for smoothing of non-round chair parts such as crest rails, arm bows and...
Blades for the Veritas Scraping Plane
Blades for the Veritas large scraping plane 05P2901.
Lie-Nielsen Scrub Plane
This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane.
It is also useful for shaping irregular objects or creating an interesting finished surface.
The Lie Nielsen Scrub Plane has a cast Iron body, 10¼" long. The blade is massive to eliminate...
Veritas Scrub Plane + PM-V11 Blade
The scrub plane is the tool of choice for major stock removal, the first step when flattening rough stock by hand. Much like a low-angle smooth plane, a scrub is not usually used parallel to the grain, but at an angle of 30° or more. The blade edge is ground with a 3" radius, so that it takes an aggressive cut. This is the tool you use to get stock into a condition where you then can use a...
Lie Nielsen No.66 Iron Beading Plane
This Beading Tool can quickly produce a wide range of decorative profiles without the fuss and fiddle of setting up an electric router.
Derived from an early, generously proportioned Stanley No. 66, it has a Ductile Iron body and Bronze blade clamp. Two Bronze fences are included, one for curved work and one for straight work, and can be adjusted along the slot across the bottom of the tool.
The...
Veritas Small Plough Plane - Left Handed
This is the Left Handed Version.
Veritas Combination Plane
Originally created to replace stacks of hollow and round wooden planes, combination planes are defined by their flexibility. The Veritas® Combination Plane is no exception; only this one is designed with better adjustment and feed mechanisms for easy and accurate blade setting, and incorporates features to prevent blade vibration, making it reliable in use. It will tackle fundamental joinery,...
Veritas Small Plough Plane
This is Veritas' redesigned small plough plane. While it still excels at cutting grooves, rabbets and tongues, it now has the ability to cut decorative beading (beading blades available soon).
Closest in size to the classic Record #044 plane, the preferred size of the old-style plough planes, it has a 6 5/8'' long fence that registers solidly to the workpiece and is through-drilled...
Lee Valley Cast Scratch Stock
Founded in 1825, Edward Preston & Sons, Ltd. produced some of the finest tools of the Victorian age.
This elegant hand reeder and beading tool can be used to cut decorative profiles into furniture (such as beading on small table or cabinet edges or reeding on chair and table legs). It can also be used with a straight cutter for shallow rabbeting work, such as on mirror and picture frames.
The...
Hock Scratch Stock
Ron Hock Scratch Stocks are made from tough, wear-resistant bamboo plywood. Two spring steel blades are included, one of which has a quirk-bead shape cut into it, to get you started using your Scratch Stock with no more than final honing. Other shapes are up to your imagination and are cut into the blades with files and slipstones.
The body measures 3/4" x 1-1/2" x 4-3/4", the blue-tempered...
Cutters for the Lee Valley Cast Scratch Stock
These cutters are for the Lee Valley Cast Scratch Stock.
Made in Canada.
Veritas Miniature Bench Plane
This 1/3 scale version of the Veritas small bevel-up smooth plane is only 3½" long and 13/16" wide.
Fully functional, it has a 5/8" wide A2 blade (0.06" thick) with a 25° bevel angle that, together with the 13° bed angle, provides an effective cutting angle of 38°. The stainless-steel Norris-style adjuster lets you set the blade with precision.
The body is made from investment-cast stainless...
Veritas Miniature Cabinetmaker's Trimming Plane
This fully functional 1:3-scale version of the Veritas cabinetmaker's trimming plane is a useful tool for reaching places a regular-size plane or chisel just won’t fit. Only 2 3/16'' (55mm) long, 5/8'' (16mm) wide and less than 1'' (25mm) in height, it excels at making precise paring cuts in tight spots, such as a box interior.
The 25° bevel blade and 15°...
Veritas Miniature Bevel-Up Jack Plane
This fully functional 1:3-scale version of Veritas' low-angle jack plane is the latest in their line of miniature tools. At 5" long and almost 1" wide, it weighs just over 4 oz, a useful size for fine trimming work. It has a 3/4" wide A2 blade with a 25° bevel angle and a 13° bed angle. The stainless-steel Norris-style adjuster lets you set the blade with precision.
The body is made from investment-cast...
Veritas Miniature Edge Plane
A 1/3-scale version of the current Veritas iron edge plane, which is the third-generation design of a model they first produced in 1986, this is a fully functional miniature. Useful for fine trimming work on thin stock up to 3/8" thick, such as with small-scale boxes or maquettes, it fits the hand well, making it easy to control under fingertip pressure.
The 2-3/8" long body and lever cap are...
Veritas Miniature Plough Plane
The Veritas Miniature Plough Plane is an intriguing gift for any woodworker, this is a 1/3 scale working model of the popular Veritas small plough plane. It is only 3" long and weighs less than 3 oz.
Made from investment-cast and machined steel, it has a wooden tote and a 3/32" A2 wide blade for cutting slots. The fence is adjustable for offset.
Made in Canada, it comes in a French-fitted...
Veritas Miniature Spokeshave
This spokeshave is the latest addition to the Veritas line of fully functional miniature tools. At less than an ounce and only 3½" long overall, it is a third the size of their regular flat-bottomed spokeshave, and is useful for making fine shaping cuts where a full-sized tool would be too bulky or awkward to use.
Made of investment-cast stainless steel, the low-profile body (9/16" tall) has...
Veritas Detail Palm Planes
With a height-adjustable palm rest for better in-hand registration, these miniature planes are easily maneuvered and permit fine, controlled cuts.
The investment-cast steel body has a 45° bed angle and a fixed mouth, and uses a brass retention screw to secure the included 30° bevel A2 tool steel blade (0.06" thick by 3/8" wide). The soles are approximately 1½" long by 5/8" wide and are available...
Blue Spruce Optima Chisel Plane
The new Blue Spruce Optima Chisel Plane fills a unique void in your tool collection. It serves as a master of dexterity in the places we can't. Reach for it anytime you need to trim plugs, end grain, pare away joinery surfaces, clean glue squeeze-out, and more. It thrives in wide-open plywood projects and confined casework. The elevated handle allows the iron to lie flat - a situational advantage...
Lie-Nielsen Chisel Plane
The Lie-Nielsen Chisel Plane is the perfect little tool (6½" x 1¾") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates.
The heavy 3/16" thick blade is set at 12 degrees. You adjust the depth of the cut by a nicely machined knurled knob. American cherry handle.
!!!!
Veritas Cabinetmakers Trimming Plane
Commonly called a chisel plane, this 165mm long by 44mm wide plane has an exposed full width blade that lets you work up to adjacent surfaces. It excels at making paring cuts in places where a chisel would be awkward or impossible to use, making short work of cleaning up corners and joints inside carcasses. Because the blade can be set level with the sole, you can also trim plugs or small inlays...
Lie-Nielsen No.95 Edge Trimming Block Plane (Right Hand)
The Lie-Nielsen Edge Trimming plane is based on Stanley's No.95 plane, but you get the added choice of either right or left handed versions.
It has a fixed fence that holds the iron at a 90 degree angle against the edge of a board. For boards up to about ¾" wide, this tool is a very convenient way to get square edges. Precision machined from a manganese bronze casting.
!!!!
Veritas Edge-Trimming Planes
Edge-trimming planes are used for final trimming cuts on jointed boards to ensure smooth edges at exactly 90° to the face, and for working end grain. In many instances you will need only one model; the appropriate choice is often based on which of your hands is dominant.
However, neither model is exclusively for left or right handed users, as the planes are in fact complementary. Having both...
Lie-Nielsen Tongue & Groove Plane - 1/2''
The Lie-Nielsen Tongue & Groove Plane (1/2") cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one-piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster is needed.
Made to centre on 1/2" stock, tongue...
Lie-Nielsen Tongue & Groove Plane - 3/4''
The Lie-Nielsen Tongue & Groove plane cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster is needed.
Comes with a 3/16'' (4.8mm) thick A2 steel...
Lie-Nielsen No.40B Butt Mortice Plane
The Butt Mortice is a simple to use plane that produces precise mortices of uniform depths with sharp, square corners.
The body is cast iron with a bronze blade cap, and the handles are polished cherry. The sole has a long slot that gives a clear view of your work and allows for quick removal of shavings. The plane measures 9 3/4" x 1", with a 3/4" wide blade.
Veritas Hinge Mortice Plane
The Veritas Hinge Mortice plane can accurately cut the recesses for door hinges or strike plates in a fraction of the time it takes to set up a router or chop them out with a chisel. The precision blade depth adjuster ensures an accurate, uniform depth. The ductile cast iron body has been accurately machined and ground flat. The large wooden knobs are positioned to provide comfort and excellent control....
073 Shoulder Plane - Ray Iles Replacement Iron
This replacement Iron fits the Classic Record 073 shoulder plane.
These replacement irons are made of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C and will have edge keeping qualities equal to the originals.
Blades for the Veritas Detail Palm Planes
Replacement blades for the Veritas detail palm planes. (Convex and double-convex planes use the same blade.)
Replacement Blade for Veritas Cabinetmakers Trimming Plane
Replacement lapped O1 steel blade for the Veritas Cabinetmaker's Trimming Plane. Hardened to Rc58-60.
Made in Canada.
Spare Blade for Lie-Nielsen 95 Edge Plane
Replacement blade for the Lie-Nielsen No. 95 Edge Planes. Comes with a 25° flat ground bevel.
1.105" wide x .125" thick
A2 cryogenically treated Tool Steel
Spare Blade for Veritas Edge-Trimming Plane
Replacement blade for the Veritas Edge-Trimming Plane. 1/8" thick, 1 1/4" wide replacement blades in PM-V11 steel work wood up to 1" wide.
Made in Canada.
Spare Blades for the Veritas Detail Rabbet Planes
The lapped replacement blades for the Veritas detail rabbet planes are made of O1 tool steel.
Spare Blades for the Veritas Scrub Plane
Available in high-carbon steel (Rc58-60) or PM-V11 steel (Rc61-63). The blade edge is ground with a 3" radius, so it takes an aggressive cut.
Toothed Blade for the Lie-Nielsen 101 Violin Makers Plane
Toothed blade for our No. 101 Violin Maker's Block Plane. Comes with a 25° flat ground bevel.
7/8'' wide x 1/8'' thick
A2 cryogenically treated Tool Steel
Please Note: Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots. We recommend that you hone your toothed blade...
Toothed Blade for the Lie-Nielsen 102 Block Plane
Replacement blade for the No. 102 or No. 103 Block Planes. Comes with a 25° flat ground bevel.
1.250'' wide x .125'' thick
A2 cryogenically treated Tool Steel
Toothed blades have small chisel-like teeth .030'' (.762mm) wide, and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
Please...
1 3/4'' Blade for Clifton No.3 Bench Plane
1 3/4'' blade to fit the Clifton No.3 smoothing plane.
The Clifton bench plane blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C. 3.6mm thick.
1 3/4'' (45mm) wide.
Made in Sheffield, UK
2 3/8'' Blade for Clifton No.4 1/2, 5 1/2, 6 & 7 Bench Plane
2 3/8'' blade to fit the Clifton No.4 1/2 smoothing plane, and the No.5 1/2 jack plane.
The Clifton bench plane blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C. 3.6mm thick.
2 3/8'' (60mm) wide.
Made in Sheffield, UK
2'' Blade for Clifton No.4 & 5 Bench Plane
2'' blade to fit the Clifton No.4 smoothing plane, and the No.5 jack plane.
The Clifton bench plane blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C. 3.6mm thick.
2'' (50mm) wide.
Made in Sheffield, UK
Blade for Veritas Flat & Round Spokeshaves
Replacement PM-V11 blade to fit both the Veritas Flat (05P3373) and Round (05P3374) Spokeshaves.
Blade for Veritas Low-Angle Spokeshave
Replacement PM-V11 blade to the Veritas Low-Angle Spokeshave (05P3273).
Blade for Veritas Skew Rebate Plane
Replacement PM-V11 blade to fit the right hand Veritas Skew Rebate.
Blade for Veritas Small Bevel-Up Bench Plane
Veritas 1¾" Blade - PM-V11 - 25° Bevel. Fits the Veritas Small Bevel-Up Bench Plane.
Blades for the Veritas Low Angle Smoothing Plane
Veritas 2" Blade in PM-V11 to fit the Veritas Low-Angle Smoothing Plane
Blades for Veritas Apron Plane
Veritas 1 1/4" blade for the Veritas Apron Plane. Available in O1 or PM-V11 steel with a 25° bevel, or an A2 toothed blade at 38°.
Blades for Veritas DX60 Block Plane
PM-V11 replacement blade for the Veritas DX60 and NX60.