Sort By
Per Page
View
Grid
List
Veritas Front Vice - Large
This vise has rugged, machined, double guide rods and a single-lead Acme screw.
The large front vise is 10-1/2" × 21" overall with a 1-1/8" dia. screw, and 13" clamping capacity (less the thickness of your wooden jaws). The larger vise has an offset center screw to allow vertical clamping without skewing.
Can be added to an existing bench or built into a new one.
Mounting screws included.
Made...
Veritas Front Vice - Regular
This vise has rugged, machined, double guide rods and a single-lead Acme screw.
The regular front vise is 7" × 14¾" overall with a 7/8" dia. screw and clamping capacity of 8¼" (less the thickness of your wooden jaws).
Can be added to an existing bench or built into a new one.
Mounting screws included.
Made in Canada. Patented.
Veritas Quick-Release Front Vice
Using the same quick-release mechanism as our tail vise, our front vise has a simple on-off cam lever to engage or disengage the Acme-threaded screw, allowing it to apply up to 400lb of force in either clamping or spreading applications.
The screw mechanism provides 12¼" of overall travel (less the thickness of your wooden jaw and bench apron). Tight body tolerances result in minimal jaw sag,...
Veritas Quick-Release Sliding Tail Vice
Installing a tail vise is notoriously difficult, usually requiring a section of workbench to be cut away and rebuilt around a complicated vise mechanism. Not so with this one. It can be quickly incorporated into a new bench construction or easily retrofitted to an existing bench without major surgery.
The end plates are symmetrical, so you can install the T-handle and quick-release lever in a...
Veritas Quick-Release Wonder Dog
This version of the Wonder Dog has a fast-acting cam mechanism to speed up adjustments. You just slide the head against the workpiece, then throw the lever to apply clamping force. Curved and irregular shapes can also be clamped; two screw holes in the brass dog head let you attach a custom face of any shape, giving good control without marring work.
The low-profile head and clamp body are 5/8"...
Veritas Shoulder-Vice Screw
This vice screw is for the L-shaped shoulder vise used on Scandinavian-style benches. 1-1/8" dia. screw with single-lead Acme threads.
The threaded guide is mortised into the vise shoulder, while the end guide attaches to the vise jaw. 7-1/4" clamping capacity (less wooden shoulder thickness), 13" overall. Mounting screws included.
Made in Canada. Patented.
Veritas Special Bench Bolts
Most European benches use a bolt system to fasten leg sets to stretchers. The main advantage is that you can snug the bolts if anything loosens due to changes in humidity.
The solid brass nuts on our bench bolts slide into a pre-drilled hole in the stretcher, and distribute pressure to prevent breakout. A bench can be made very rigid (without complex joinery) by using a wide stretcher, since the...
Veritas Tail Vice
This vise can be used for both types of tail vise - with or without a shoulder. It has guide plates 2" wide by 15" long. The maximum opening is 8" (less the thickness of your wooden jaws).
The single-lead Acme screw is 7/8" in diameter.
Made in Canada. Patented.
Veritas Twin-Screw Vice
The Veritas Twin Screw Vice is the only non-racking full-width end vise on the market. You can clamp anything anywhere in the vise and the jaws stay parallel. The chain drive ensures parallelism and eliminates the racking common in other vises. It can be operated using either handle.
Even better, a spring-loaded lock pin lets you disengage the chain for controlled jaw skewing needed to equalize...
Veritas Wonder Dogs & Pups
Steel post and screw with black oxide finish, solid brass clamp head and handle.
These can pivot in any direction that clamping is required. An easy-adjusting handle provides ample clamping pressure in any position. The dog head has two screw holes, so any tip shape can be cut with a scroll saw and attached for specialized work.
The Wonder Dog post is 6½" and is drilled and tapped...
Veritas Wood Carver's Vice
A good carver's vice should be adjustable in all three axis. This one has full rotation in two axes and 3" of height adjustment in the third axis. But more important, it has controlled release; when you relieve the clamping pressure, a combination of internal springs and O-rings provides residual resistance so that your work does not suddenly fall or rotate. You can reposition the work and...
Veritas Chair Doctor Glue
Veritas Chair Doctor glue can penetrate narrow cracks in chairs. I used this on my kitchen chairs which had become decidely wobbly and they are able to withstand my sons rough treatment again - excellent.
If a chair has a loose rung, an injection of Chair Doctor Glue will first swell the rung & then bond it.
The low viscosity lets it soak into the end grain of wood, swell it and then freeze...