Sort By
Per Page
View
Grid
List
Long Rods for Veritas Skew Rabbet
Double guide rods and a special collet locking system prevent the fence from racking, and the large brass knobs allow fast and easy adjustments without tools. The fence can be positioned to allow a maximum rabbet width of 1½".
Prices include VAT
Optional Depth Stop for Veritas Skew Block Plane
For use with the skew block plane, this depth stop lets you finish cuts at a precise depth.
The cast zinc-aluminum alloy arm is held in place by the front knob. The steel shoe is adjustable from flush to a maximum depth of 5/8" and has relieved edges to avoid marking your work.
Made in Canada.
Replacement Blade for Veritas Cabinetmakers Trimming Plane
Replacement lapped O1 steel blade for the Veritas Cabinetmaker's Trimming Plane. Hardened to Rc58-60.
Made in Canada.
Spare Blade for Veritas Edge-Trimming Plane
Replacement blade for the Veritas Edge-Trimming Plane. 1/8" thick, 1 1/4" wide replacement blades in PM-V11 steel work wood up to 1" wide.
Made in Canada.
Veritas Plane Screwdriver
A regular screwdriver just doesn't work well on cap iron screws. A narrow blade can mar the cap-screw slot, and there's always the risk that the screwdriver tip will slip out of the slot altogether. Veritas have designed this screwdriver to make it both safe and easy to remove, replace or adjust cap irons.
It has a turned brass collar surrounding the tip to capture the head of a cap iron screw...
Veritas Crosscut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed crosscut at 14tpi. The teeth have a rake angle of 15°, an included angle of 60° with alternate 15° bevels to efficienlty sever wood fibres rather than tear. The depth of cut is 60mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid...
Veritas Dovetail Saw
When we first saw this saw (!) we were a bit dubious but it has quickly grown on us. It is very comfortable. it is very affordable, it cuts well and can be re-sharpened. Not for the purists maybe but beauty is in the eye of the beholder. This is what those clever chaps from Veritas say about this saw....
The Veritas dovetail saw is an innovative blend of tradition and technology. It incorporates...
Veritas Fine Cut Dovetail Saw (20tpi)
The Veritas Fine Cut Dovetail Saw (20tpi) is best for stock of less than half an inch thick, this finer version of the standard Dovetail saw would complement your existing saw armoury.
The Veritas dovetail saws are an innovative blend of tradition and technology, incorporating the critical characteristics of a classic fine joinery saw but made using modern production processes and state-of-the-art...
Veritas Flush Cutting Saw
Traditionally used for the rapid trimming of plugs and dowels flush with a surface, the Veritas flush cutting saws can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only
The 22 tpi Japanese tooth-pattern blade cuts aggressively (on the pull stroke), but does not mark the surface that it is...
Veritas Gents Saw - Cross Cut
Sharing the same, advanced materials as the Veritas dovetail and carcass saws, these Gent’s saws have 200mm long high-carbon steel blades just 0.4mm thick with 0.08mm of teeth set per side.
The teeth on the 22tpi crosscut saw have a rake angle of 15°, an included angle of 60° and alternating 15° bevel angles so that they sever rather than tear wood fibres.
Depth of cut is 41mm....
Veritas Gents Saw - Rip Cut
Sharing the same, advanced materials as the Veritas dovetail and carcass saws, these Gent’s saws have 200mm long high-carbon steel blades just 0.4mm thick with 0.08mm of teeth set per side.
The 20tpi ripsaw has teeth with a 14" rake angle and a 60° included angle.
Depth of cut is 41mm. For strength and rigidity, the glass and stainless steel-filled polymer spine is moulded over...
Veritas Magnetic Guide & Saw
Hand-cut dovetails remain the mark of the skilled cabinetmaker and a feature that buyers look for in high-end furniture. Veritas has developed a guide and saw system that lets amateurs achieve professional results. The system also allows the seasoned expert to produce dovetail joints more quickly and with less effort.
The Veritas Magnetic Dovetail 1:8 Guide, clamps in position and holds the saw...
Veritas Magnetic Saw Guides
This anodised aluminium Veritas Magnetic Saw Guide helps keep your saw on the right track and perpendicular to a workpiece. It provides a registration surface about 32mm tall. It is particularly useful when crosscutting tenon shoulders or the edges of a dado, which is where you want your saw to cut straight and true. You can hold the guide onto your workpiece with a hand or secure it with clamps.
The...
Veritas Rip Cut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm.
The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece...
Veritas Saw Guide Clamps
These Veritas Saw Guide Clamps are 50mm capacity clamps are anodised aluminium with solid brass screws and pads. They fit into the T-slot on the underside of the saw guide leaving the upper surface clear.
These clamps ensure the guide is secure and firmly held in place resulting in a higher degree of accuracy. Note they can also be used with the magnetic saw guide.
Veritas Small Crosscut Saw
Used for cutting across or perpendicular to the grain, the 16 tpi crosscut saw blade has teeth filed with alternating bevel angles so it severs rather than tears wood fibers; it tracks better and leaves a smoother finish than a rip-cut blade. The teeth are filed with 15° rake and bevel angles and have 0.003" of set per side.
Veritas Tenon Saws
The unique designs of the Veritas carcass saws and dovetail saws have proved to be extremely popular and Veritas have now introduced two superb tenon saws to complement their range. They combine the best characteristics of this fine classic joinery saw with those of state-of-the-art materials and construction methods.
The tooth pattern on the thin high-carbon steel blade provides a good balance...
Veritas Canvas Apron
With cross-back straps to place the weight of the apron on your shoulders instead of your neck, this apron is 100% cotton canvas, a lightweight and durable material.
At about 34" long and 28" wide, the bib provides ample front and side coverage. The shoulder straps are easy to adjust with low-profile, unobtrusive clips, and the adjustable waistband has a quick-release buckle. A pocket...
Veritas Pocket Layout Square - Set of 3 Metric
Just as a speed square is an essential layout tool for carpenters and framers, these small squares are similar in both form and function but are appropriately sized for laying out joinery and other common workshop tasks.
Available individually and as a set including 35mm, 60mm and 85mm squares – each a compact, lightweight tool that fits into a pocket, comes to hand nicely, and is easy to...
Veritas 14 Degree Dovetail Marker
For quick, accurate marking of dovetails, a dovetail marker is the best tool available.
With riding ledges on both sides, these 2" × 2" markers can be flipped over to mark both slopes of the dovetail. They are designed so that the entire ledge is riding on the reference face, even when marking edge dovetails. The relieved corners at the join of the body and the riding ledges ensure...
Veritas Tabling Scribe
No matter how careful you are with layout and assembly, a legged project will almost always be wobbly. One way to ensure the project will sit properly without rocking is by tabling it; that is, placing the project on a fl at table (e.g., the top of a table saw), marking a consistent trimming line on each leg, and then cutting to this line. The Veritas Tabling Scribe simplifies this step, providing...
Replacement Blades for Veritas Chair Devils
These high-carbon steel replacement blades are for use with the Veritas Chair Devils. At 0.040'' thick, they are hardened to Rc48-52 and come with a finely ground 45° cutting edge.
Veritas Carvers Knife
This Veritas carvers knife has an oval handle for comfort with grooves to grip. It comes with 12 razor sharp, high carbon blades that are easy to hone in your style. The removable magnetic end cap will store 6 blades without rattling and the solid brass collet on an anodized aluminium body allows a quick blade change.
Veritas Small Journeyman's Mallet
The Veritas Small Journeyman's Mallet has a solid brass head, a walnut handle and a simple, refined profile, making it an elegant and effective mallet.
Designed for work that requires more finesse than power, it can be held by the handle or used with the head cradled in your palm, allowing you to more precisely control the force of blows. The head is attached to the handle with a blind threaded...
Veritas PM-V11 Bench Chisels
Precision made in Veritas' own machine shop, these bench chisels are milled from PM-V11 steel (Rc61-63), an innovative proprietary alloy. This metal's micro-structure makes it extremely durable, so it can withstand the impact of heavy chopping cuts without chipping or deforming as readily as other tool steels, even at bevel angles as low as 20°. Highly wear resistant, the edge typically...
Veritas PM-V11 Butt Chisels
Veritas Butt chisels are made in wider sizes than most chisels, making them efficient for wasting out large areas, such as the mortices for installing butt hinges. They also have shorter blades that some woodworkers find offer improved control.
Made from PM-V11 tool steel, the blades taper from shoulder to tip for strength and rigidity, and have parallel sides and true bevel edges for clearance...
.png "Last Ones!")
Veritas PM-V11 Mortice Chisels
These are substantial mortice chisels. The blades are more than 1/2" thick at the heel of the bevel and are a consistent width from tip to shoulder for accurate registration in a mortice.
The chisel sides are slightly relieved to reduce sidewall friction and allow for minor cut corrections. Each has a 25° primary bevel to make deep cuts easier, with a 35° secondary bevel to give them...
Veritas Jointer/Edger
This jointer/edger can be used on cabinet scrapers, scraper plane blades, handsaws and ski edges.
It has a 45° jointing capability as well as the standard 90°. The handle has a comfortable, ergonomic shape and the screws are designed so they can be tightened with a small coin (to accommodate skiers).
In the shop, it is invaluable for jointing scrapers and handsaws; the fence is relieved next...
Blade for Veritas Flat & Round Spokeshaves
Replacement PM-V11 blade to fit both the Veritas Flat (05P3373) and Round (05P3374) Spokeshaves.
Blade for Veritas Low-Angle Spokeshave
Replacement PM-V11 blade to the Veritas Low-Angle Spokeshave (05P3273).
Blade for Veritas Skew Rebate Plane
Replacement PM-V11 blade to fit the right hand Veritas Skew Rebate.
Blades for the Veritas Detail Palm Planes
Replacement blades for the Veritas detail palm planes. (Convex and double-convex planes use the same blade.)
Blades for Veritas Apron Plane
Veritas 1 1/4" blade for the Veritas Apron Plane. Available in O1 or PM-V11 steel with a 25° bevel, or an A2 toothed blade at 38°.
Pair of Mounting Knobs for Veritas Universal Variable Angle Fence
A pair of stainless-steel knobs for mounting the Veritas universal variable angle plane fence to the bevel-up jointer, jack rabbet and shooting planes.
Made in Canada.
Spare Blades for the Veritas Detail Rabbet Planes
The lapped replacement blades for the Veritas detail rabbet planes are made of O1 tool steel.
Spare Blades for the Veritas Scrub Plane
Available in high-carbon steel (Rc58-60) or PM-V11 steel (Rc61-63). The blade edge is ground with a 3" radius, so it takes an aggressive cut.
Spare PM-V11 Blade for Veritas Bullnose Shoulder Plane
Replacement PM-V11 blade for the Veritas bullnose shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Large Shoulder Plane
Replacement PM-V11 blade for the Veritas large shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Medium Shoulder Plane
Replacement PM-V11 blade for the Veritas medium shoulder plane are lapped, 1/8" (0.125") thick.
Spare PM-V11 Blade for Veritas Small Shoulder Plane
Replacement PM-V11 blade for the Veritas small shoulder plane are lapped, 1/8" (0.125") thick.
Veritas 2 1/4'' Blades for Bevel-Up and Low-Angle Bench Planes
2 1/4" blades that fit the Veritas Bevel-Up Smoother, Low-Angle Jack, Bevel-Up Jointer. Also fits the Shooting Board Plane (25° bevel).
Veritas Optional Depth Stop for Small Router Plane
This optional stainless-steel depth stop is for use with the Veritas Small Router Plane. To limit cutting depth to a preset maximum, the stop clamps onto the blade shaft.
Made in Canada.
Veritas Universal Variable Angle Plane Fence
Designed to fit a wide array of bench planes, including those made by some other manufacturers, this variable angle fence can be used left or right. Not just for right angles, the fence allows you to plane accurate and consistent angles from 45° to 135°.
Angles are set using a square or angle gauge, or directly on an angle you wish to match. A spring-loaded lever locks the fence and can...
Blades for Veritas Low & Standard Angle Block Plane
Replacement blades for the Veritas Low & Standard angle block planes
Blades for Veritas DX60 Block Plane
PM-V11 replacement blade for the Veritas DX60 and NX60.
Blade for Veritas Small Bevel-Up Bench Plane
Veritas 1¾" Blade - PM-V11 - 25° Bevel. Fits the Veritas Small Bevel-Up Bench Plane.
Blades for the Veritas Low Angle Smoothing Plane
Veritas 2" Blade in PM-V11 to fit the Veritas Low-Angle Smoothing Plane
Veritas Chamfer Guide for Low-Angle Block Plane
You can convert the Veritas Low-Angle Block Plane (05P22.01) and Standard Block Plane (05P22.30) into chamfer planes in seconds with this cunning guide.
Easy to install - you first set the chamfer width on the guide, then install the guide by unscrewing the front knob of the plane, replacing the toe piece with the chamfer guide and tightening the knob again. It is ready to go.
Adjustable for...