Category
Brand
Collection
Price
Additional Filters
582 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Veritas ¾'' Bench Chisel – PM-V11 [Pre-owned]Veritas ¾'' Bench Chisel – PM-V11 [Pre-owned]
Sold
Veritas ¾'' Bench Chisel – PM-V11 [Pre-owned]
Virtually unused, original packaging with sharpening instructions.
USD $82.60 excl tax, duties and fees
Veritas 1'' Bench Chisel – PM-V11 [Pre-owned]Veritas 1'' Bench Chisel – PM-V11 [Pre-owned]
Sold
Veritas 1'' Bench Chisel – PM-V11 [Pre-owned]
Virtually unused, original packaging with sharpening instructions.
USD $82.60 excl tax, duties and fees
Tite-Mark Standard [Pre-owned]Tite-Mark Standard [Pre-owned]
Sold
Tite-Mark Standard [Pre-owned]
Glen Drake Standard Tite mark in fine working order.
USD $93.61 excl tax, duties and fees
Lie-Nielsen Toolworks - Set of 5 Bench Chisels A2 [Pre-owned]Lie-Nielsen Toolworks - Set of 5 Bench Chisels A2 [Pre-owned]
Lie-Nielsen Toolworks - Set of 5 Bench Chisels A2 [Pre-owned]
Sharpened and honed by Curtis Turner – one of Lie-Nielsen's brilliant demonstrators – at The North of England Woodworking Show. This set of 5 bevel edge socketed bench chisels are the following widths: 1/8'', 1/4'', 3/8'', ½'' & ¾'' Little used and well cared for.
USD $435.00 excl tax, duties and fees
Henry Taylor (Diamic) - Heavy-duty Socketed Framing Chisel F47 - 1 ½'' wide [Pre-owned]Henry Taylor (Diamic) - Heavy-duty Socketed Framing Chisel F47 - 1 ½'' wide [Pre-owned]
Henry Taylor (Diamic) - Heavy-duty Socketed Framing Chisel F47 - 1 ½'' wide [Pre-owned]
We have resharpened the cutting edge of this ash handled heavy duty firmer chisel on a Tormek machine (so it is hollow ground) - it is now ready to get to work. In truth, this chisel slipped out of its packaging onto our showroom floor (again the finger of blame points to Fraser) which slightly damaged the edge. It is unused. This product is out of stock currently at Classic Hand Tools where...
USD $88.10 excl tax, duties and fees
Shapton 1000grit Sharpenng Stone – Glass backed ceramic - slight corner damage [Clearance]Shapton 1000grit Sharpenng Stone – Glass backed ceramic - slight corner damage [Clearance]
Sold
Shapton 1000grit Sharpenng Stone – Glass backed ceramic - slight corner damage [Clearance]
Clumsy Fraser who works for us has had his wages docked again for causing more damage. This glass backed ceramic sharpening stone by Japanese supplier Shapton is 1000grit. The damage is confined to one corner of the 210mm x 75mm stone. The area of damage is 5mm x 5mm (less than a ¼'' square) – so can be easily avoided when sharpening. This stone new and undamaged retails...
USD $24.78 excl tax, duties and fees
Gransfors Bruk – Broad Axe - Left handed 4813 with offset handle [New with damaged leather sheath]Gransfors Bruk – Broad Axe - Left handed 4813 with offset handle [New with damaged leather sheath]
Gransfors Bruk – Broad Axe - Left handed 4813 with offset handle [New with damaged leather sheath]
Fraser (who else?) has managed to cut the leather sheath that protects the edge of the Swedish made axe. The axe is fine but you should be aware that the sheath is damaged. However, it is functioning (unlike Fraser) as intended and the damage is not where the cutting edge sits. Left grind with left offset handle. Unused – as new. 4813 Left Offset Handle - Left Grind. With the back...
USD $192.72 excl tax, duties and fees
Scooped Adze by Muller – Austria [Clearance]Scooped Adze by Muller – Austria [Clearance]
Scooped Adze by Muller – Austria [Clearance]
New but the edge needs to be re-sharpened. Great for hollowing and shaping. 450mm overall length with straight ash handle. 70mm wide cutting edge which is almost a semi circle. Normally retails for £103
USD $88.10 excl tax, duties and fees
Record 050 Combination Plane [Pre-owned, As New]Record 050 Combination Plane [Pre-owned, As New]
Record 050 Combination Plane [Pre-owned, As New]
Never used. All in 90-100% as new condition (just the long bars are a little scruffy). Original tatty box but pretty much everything else including all the 18 cutters are in unused, untarnished condition. Instruction booklet.
USD $148.67 excl tax, duties and fees
Lie-Nielsen Toolworks No 102 Low Angle Bronze Block Plane [Pre-owned]Lie-Nielsen Toolworks No 102 Low Angle Bronze Block Plane [Pre-owned]
Lie-Nielsen Toolworks No 102 Low Angle Bronze Block Plane [Pre-owned]
This popular plane is a consistent good seller as woodworkers like the comfortable size and ease of use. Good iron. G++ condition. Classic Hand Tools offer this plane new for £165. Original box and leaflet.
USD $148.67 excl tax, duties and fees
Preston Flat Soled Spokeshave – Nickel Plated [Vintage]Preston Flat Soled Spokeshave – Nickel Plated [Vintage]
Preston Flat Soled Spokeshave – Nickel Plated [Vintage]
This attractive shave is the Preston 1391 shave with 2'' blade Original Preston iron with plenty of life left. .10'' overall. A very attractive which presents well with all original parts. A commission sale.
USD $138.76 excl tax, duties and fees
Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage]Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage]
Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage]
The boxwood on this plough plane is adorable. Marples & Sons Hibernia Works, Sheffield - stamped on the plane body (irons/cutters have same owners stamp). A few dinks and bruises but nothing that really detracts from the quality of this vintage plane. 7 cutters – stamped 1-7 You may keep picking this plane up to admire the boxwood fittings. A commission sale.
USD $191.62 excl tax, duties and fees
Edward Preston Wide Shoulder Plane No.1368 [Vintage]Edward Preston Wide Shoulder Plane No.1368 [Vintage]
Edward Preston Wide Shoulder Plane No.1368 [Vintage]
In full working order, this heavy-duty shoulder plane is supplied with a new Ray Iles iron as the previous owner has exhausted the original cutter (also supplied) 1 ¼” wide and 8 1/4” long. You can read all about Preston Shoulder planes at Preston Tool Reviews website An excellent alternative to the current new offerings by Lie Nielsen, Veritas & Clifton. The mouth...
USD $178.41 excl tax, duties and fees
2 good user planes – Jointer & Smoother [Pre-owned]2 good user planes – Jointer & Smoother [Pre-owned]
2 good user planes – Jointer & Smoother [Pre-owned]
A very nice Record No.7 (made in England) and a Stanley Bailey 4 ½ - pre-owned These are good quality examples of older planes which have been well cared for. The No.07 has stained beech handles. The Stanley 4 ½ has beech handles. Both have 2 3/8” wide irons with good life left in them (why not upgrade to a Hock iron?) A commission sale.
USD $218.05 excl tax, duties and fees
Stanley Double Sided Rebate Plane – No.79 [Vintage]Stanley Double Sided Rebate Plane – No.79 [Vintage]
Stanley Double Sided Rebate Plane – No.79 [Vintage]
A very crisp example of this classic little side rebate pane with original parts and good cutter life left. A nice little plane. Made in England. This plane is designed to help with accurately trimming dados, grooves and mouldings. The body houses two skew cutters set at a very low angle. 5 ½” overall. It also has a reversible nose for each side to allow for closer corner...
USD $99.11 excl tax, duties and fees
Norris No.13 Smoothing Plane [Vintage]Norris No.13 Smoothing Plane [Vintage]
Norris No.13 Smoothing Plane [Vintage]
Steel soled Norris smoothing plane with pinned parallel patent metal sides and attractive rosewood infill. Alex Mathieson & Son iron ( 1 ½” remaining at least) and matching cap iron. The lever cap is stamped Norris London. This was once owned by an A Kirkland, whose name is on the rosewood, AK initials on the plane bed and quite discreetly dotted on one of the steel sides. The...
USD $588.08 excl tax, duties and fees
Tormek Accessory Bundle [Pre-owned]
Tormek Accessory Bundle [Pre-owned]
10 Tormek goodies – all pre-owned, all in original packaging, most with printed instructions and all used quite sparingly. Please refer to our Tormek page for more detailed descriptions including excellent videos. This lot would set you back about £500 new. SG-200 - The Tormek Original Grindstone SG-200 is the smaller version of the SG-250 grindstone and has the same composition...
USD $330.38 excl tax, duties and fees
Henry Taylor Sheffield Fishtail Carving Gouges – Series 11 – 5 widths [New, Clearance]
Henry Taylor Sheffield Fishtail Carving Gouges – Series 11 – 5 widths [New, Clearance]
Clearance stock, From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Professional grade Sheffield made fishtail gouges series 11 – which is a tight curve. These...
USD $132.15 excl tax, duties and fees
Pair of Lie-Nielsen Drawbore Pins [Pre-owned]Pair of Lie-Nielsen Drawbore Pins [Pre-owned]
Revised
Pair of Lie-Nielsen Drawbore Pins [Pre-owned]
Drawboring is a great way to make a strong mechanical joint. A wooden pin is hammered through slightly offset holes in the two pieces, and pulls the joint together. You use Drawbore Pins to pull the joint together first (with some force and a twisting motion). This eases the edges of the hole, making driving the wood pin easier. You can also disassemble the joint if you want to work on the fit some...
USD $158.58 excl tax, duties and fees
Norris No.20E Shoulder Plane [Rare, Vintage]Norris No.20E Shoulder Plane [Rare, Vintage]
Norris No.20E Shoulder Plane [Rare, Vintage]
This plane has been professionally restored although you wouldn't know this unless we told you as the restoration is perfectly done. The steel soled mouth is tight and true. Gunmetal body with lovely ebony infil and wedge. A very nice shoulder plane which bears the dings and marks of use. There is little left of the original Norris blade (clearly stamped with Norris London) hence the...
USD $435.00 excl tax, duties and fees
Veritas Low Angle Bevel Up Smoothing Plane (with 2x A2 blades) [Pre-owned]Veritas Low Angle Bevel Up Smoothing Plane (with 2x A2 blades) [Pre-owned]
Veritas Low Angle Bevel Up Smoothing Plane (with 2x A2 blades) [Pre-owned]
This is Veritas’ state-of-the-art pure smoothing plane. It is the plane to use for the final finish on surfaces, especially woods of difficult grain patterns. It also complements the low-angle jack plane. Veritas have combined the generous width and weight of a dedicated smoother with the versatile inner workings of a low-angle bevel-up plane. The plane has a 12° bed angle, and this...
USD $297.34 excl tax, duties and fees
Japanese Marking & Layout Tool Bundle [Pre-owned]Japanese Marking & Layout Tool Bundle [Pre-owned]
Revised
Japanese Marking & Layout Tool Bundle [Pre-owned]
White oak marking gauge with matching double marking (mortise) gauge, a small awl, a marking knife and a wooden hammer. 5 separate tools all in G++ condition.
USD $71.58 excl tax, duties and fees
Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]
Revised
Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]
A recent, used Stanley No.80 Scraper plane with a new Hock replacement iron. The plane is in good order with 100% black japanning and a flat sole for the 2 3/8” sole.
USD $66.08 excl tax, duties and fees
Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]
Revised
Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]
Despite many years of handling various gauges, we hadn’t seen this particular gauge before so we enjoyed playing with the adjustable tilting head. The clear patent dates on the reverse of the fence led us to the maker BATES of BLOOMSBURG OCT 20 1896, USA Link to patent source notes Directory of American Tool and Machinery Patents Jim Bode sold one of these in the not-too-distant...
USD $99.11 excl tax, duties and fees
Tissington Smoothing Plane [Vintage, Rare]Tissington Smoothing Plane [Vintage, Rare]
Special Offer
Tissington Smoothing Plane [Vintage, Rare]
Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
USD $291.84 excl tax, duties and fees
Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]
Special Offer
Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]
This plane is a little bit rare these days!
USD $468.04 excl tax, duties and fees
Stonemasons Firesharp Chisels – 10 widths [Clearance]Stonemasons Firesharp Chisels – 10 widths [Clearance]
Revised
Stonemasons Firesharp Chisels – 10 widths [Clearance]
10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...
USD $264.31 excl tax, duties and fees
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
Revised
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...
USD $352.41 excl tax, duties and fees
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
Clearance
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
New - just having a good old clean out and this is a bit of a bargain for woodturners This Robery Sorby system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And...
USD $126.65 excl tax, duties and fees
Brusso Stainless Steel Hinges – CB302S [Clearance]Brusso Stainless Steel Hinges – CB302S [Clearance]
Clearance
Brusso Stainless Steel Hinges – CB302S [Clearance]
Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...
USD $46.25 excl tax, duties and fees
Brusso Stainless steel shelf support K-10S [Clearance]Brusso Stainless steel shelf support K-10S [Clearance]
Clearance
Brusso Stainless steel shelf support K-10S [Clearance]
The K-10S stainless steel shelf support pin comprises a decorative turned support and a cylindrical peg. Stainless steel gives the pin a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4 – you are buying 2 sets (8 shelf...
USD $55.06 excl tax, duties and fees
King Deluxe Sharpening Stone – Monster Size [Pre-owned, Unused, SOLD]King Deluxe Sharpening Stone – Monster Size [Pre-owned, Unused, SOLD]
Sold
King Deluxe Sharpening Stone – Monster Size [Pre-owned, Unused, SOLD]
1000 grit unused Japanese King brand waterstone. 230mm x 100mm x 80mm. A little workshop dusty dirty but unused in original scruffy packaging. A commission sale.
USD $66.08 excl tax, duties and fees
Clifton Multi-Plane [Pre-owned, SOLD]Clifton Multi-Plane [Pre-owned, SOLD]
Sold
Clifton Multi-Plane [Pre-owned, SOLD]
This plane was made in small numbers as a copy of the Record 045 and Stanley 45 multi plane. It has been used only for demonstration and display purposes. In fitted box with 23 cutters plus the slitting cutter in a plastic wallet. 14 plough cutters from 4mm – 32mm 5 beading cutters 3.2mm – 12mm 2 tonguing cutters – 4.8mm & 6.4mm 2 ovolo cutters 6.4mm & 9.5mm One...
USD $389.85 excl tax, duties and fees
3 Pfeil Sculpture tools [Pre-owned, As New, SOLD]3 Pfeil Sculpture tools [Pre-owned, As New, SOLD]
Sold
3 Pfeil Sculpture tools [Pre-owned, As New, SOLD]
A super bargain for you big whackers!
USD $257.70 excl tax, duties and fees
Veritas Medium Shoulder Plane [Pre-owned, SOLD]Veritas Medium Shoulder Plane [Pre-owned, SOLD]
Sold
Veritas Medium Shoulder Plane [Pre-owned, SOLD]
This is Veritas' description for this plane: ''The shoulder plane (a specialized rebate plane) is the ultimate tool for trimming a joint to a perfect fit. There is no better plane for trimming the shoulder of a tenon to perfection or for rebating work. The Veritas® medium shoulder plane is proportioned for versatility; it measures 7'' long by 0.700" wide and weighs 2...
USD $218.05 excl tax, duties and fees
2 Veritas Scraper Plane Irons – Plain & Toothed [Pre-owned, As New, SOLD]2 Veritas Scraper Plane Irons – Plain & Toothed [Pre-owned, As New, SOLD]
Sold
2 Veritas Scraper Plane Irons – Plain & Toothed [Pre-owned, As New, SOLD]
Pre-owned but probably unused. If you have this plane then these could be your spare blade and the useful toothing blade. These irons fit the No.112 style Veritas scraping plane. They are high carbon steel 7/8" wide, hardened to Rc48-51 with the cutting edges ground at 45°. The toothing iron has 25tpi with "v" shaped teeth. Senisbly priced. A commission sale.
USD $66.08 excl tax, duties and fees
ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]
Sold
ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]
ECE brand beech plane with a convex sole (side to side, not front to back like a compass plane) for making channels. This plane has not been used and presents as new in its orginal box. A commission sale. 240mm x 70mm overall with 50mm convex blade.
USD $99.11 excl tax, duties and fees
Bad Axe Saw (with Bog Oak handle) [Pre-owned, SOLD]Bad Axe Saw (with Bog Oak handle) [Pre-owned, SOLD]
Sold
Bad Axe Saw (with Bog Oak handle) [Pre-owned, SOLD]
Well these are beauties indeed. Bad Axe Toolworks design through a collaboration between The London International Woodworking Festival short course organiser Derek Jones and Mark Harrell of Bad Axe. The open standard size handles to these saws are made from bog oak. The blade is long at 17" (430mm) and tapers from 50mm - 70mm deep We have 5 to sell. You are buying one saw. A commission...
USD $290.74 excl tax, duties and fees
Handsome Wooden Smoothing Plane with Hock blade [Pre-owned, SOLD]Handsome Wooden Smoothing Plane with Hock blade [Pre-owned, SOLD]
Sold
Handsome Wooden Smoothing Plane with Hock blade [Pre-owned, SOLD]
Fraser like! This handsome plane needs to be put to work (just like Fraser!)
USD $82.60 excl tax, duties and fees
Veritas Concave Spokeshave [Rare, Pre-owned, SOLD]Veritas Concave Spokeshave [Rare, Pre-owned, SOLD]
Sold
Veritas Concave Spokeshave [Rare, Pre-owned, SOLD]
This is a curious rarity. Originally made by Veritas as one of 3 shaves designed by Brian Boggs the legendary chairmaker (and top geezer) before they were subsequently made by Lie-Nielsen Toolworks. So this dates back about 20-25 years. It is slightly smaller than the current LN model being 9" overall with rosewood handles. 1 1/4" blade.
USD $247.79 excl tax, duties and fees
Lie-Nielsen Metric Dowel Plane [Pre-owned, SOLD]Lie-Nielsen Metric Dowel Plane [Pre-owned, SOLD]
Sold
Lie-Nielsen Metric Dowel Plane [Pre-owned, SOLD]
This metric dowel plate from Lie-Nielsen Toolworks comes with a leather wallet and is unused - as new. If you want to make exact-sized dowels from any wood you choose, a Lie-Nielsen Dowel Plate is the best tool. It's also handy to get a precise tenon on chair spindles. The Lie Nielsen plates are 1/4" x 5-5/8" x 1½" surface ground A2 tool steel. The holes are machined...
USD $92.51 excl tax, duties and fees
Lie Nielsen Toolworks – 2” wide O1 blade [Pre-owned, As New, SOLD]Lie Nielsen Toolworks – 2” wide O1 blade [Pre-owned, As New, SOLD]
Sold
Lie Nielsen Toolworks – 2” wide O1 blade [Pre-owned, As New, SOLD]
Still in original unopened packaging (dated 2013) To fit No, 4 & 5 planes. O1 steel.
USD $49.56 excl tax, duties and fees
Lie Nielsen Toolworks – 2 3/8” wide blade [Pre-owned, As New, SOLD]Lie Nielsen Toolworks – 2 3/8” wide blade [Pre-owned, As New, SOLD]
Sold
Lie Nielsen Toolworks – 2 3/8” wide blade [Pre-owned, As New, SOLD]
In original opened packaging (not dated) To fit No, 4 ½, 5 1/2 , 6 & 7 planes. A2 steel.
USD $60.57 excl tax, duties and fees
Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned, SOLD]Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned, SOLD]
Sold
Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned, SOLD]
This plane is a Stanley Bailey 4 ½ smoother that has a black japanned body and frog with stained beech replacement handle with high front knob (see trade label) and lever cap from Record . It also has the considerable benefit of a hand forged 2 3/8” wide replacement blade by Clifton, Sheffield. It also has a Hock cap iron. So, one very good plane made up of 4 famous names. A good...
USD $112.33 excl tax, duties and fees
Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]
Sold
Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]
Complete with hot dog handle (which currently retails for £92) and the cherry side handle. So this is an earlier No.9 as the cherry handle was replaced over time for the hot dog option. With this purchase you get both! This discontinued plane from heirloom hand tool maker Lie-Nielsen Toolworks has been well cared for by a long-standing customer of Classic Hand Tools. We have sold 4 of these...
USD $878.82 excl tax, duties and fees
Gransfors Bruks – Double Bevel Broad Axe [Pre-owned, SOLD]Gransfors Bruks – Double Bevel Broad Axe [Pre-owned, SOLD]
Sold
Gransfors Bruks – Double Bevel Broad Axe [Pre-owned, SOLD]
The pattern of the Gransfors Broad Axe and the handle is based on old Swedish logging techniques for squaring logs and structural timbers of all kinds. Has sufficient space between the "blade’s beard" and the handle for the user’s fingers. There are different options of bevels (double, left or right). You also have handle options of straight (so the blade is in line with the cutting...
USD $218.05 excl tax, duties and fees
Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]
Sold
Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]
This plane probably dates from about the 1980’s and is in very good condition. There is relatively little wear to the sole and all the things to check for in these planes have all passed (the sole moves freely, no cracks in the casting, all original parts, mouth rivets are not proud of the sole, the lateral blade adjuster works properly, full convex and concave range etc etc).
USD $115.63 excl tax, duties and fees
2 Spokeshaves [Vintage, SOLD]2 Spokeshaves [Vintage, SOLD]
Sold
2 Spokeshaves [Vintage, SOLD]
8” beech bodied spokeshave with1 ½” straight blade, in good order. Stamped Parry & Son 359 Old St. with the Sundial logo. An adjustable mouth beech bodied spokeshave with brass adjusting knobs and curved wear strip to the sole which houses the 3” blade. No cracks, Made by J. Frost Norwich, England. 11 1/2” overall. J.Frost, Norwich dates from 1864-1892. Both...
USD $71.58 excl tax, duties and fees
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last