Category
Brand
Collection
Price
Additional Filters
235 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Record 405 Multi Plane [Vintage]Record 405 Multi Plane [Vintage]
Record 405 Multi Plane [Vintage]
A little used Record 405 in its original box, complete with a full set of cutters and instruction booklet. This Record Planes online resource is a great place to look and learn about this plane. Note this plane comes with 23 standard cutters. 11 plough and dado cutters 2 match cutters 1 sash cutter 1 slitting cutter 1 fillister cutter 7 beading cutters In original fitted...
£175.00 inc VAT
Marples Lock Mortise Chisel [Vintage]Marples Lock Mortise Chisel [Vintage]
Sold
Marples Lock Mortise Chisel [Vintage]
18” overall length with stubby 4 “ handle. All in great order. A steal!
£28.00 inc VAT
J Rabone & Sons Steel and Brass 12” decorative Machinists Spirit Level [Vintage]J Rabone & Sons Steel and Brass 12” decorative Machinists Spirit Level [Vintage]
J Rabone & Sons Steel and Brass 12” decorative Machinists Spirit Level [Vintage]
An attractive steel and brass level with 3 good clear working vials. The japanning (the black paint) is in excellent order – a nice decorative and functional tool..
£65.00 inc VAT
W.Marples & Sons 2” wide bevel edge chisel [Vintage]W.Marples & Sons 2” wide bevel edge chisel [Vintage]
Sold
W.Marples & Sons 2” wide bevel edge chisel [Vintage]
12 1/2” overall this is a lovely chisel that has a hefty hardwood handle. There is over 4“ of blade left to wear out (good luck with that!) In very good condition, no pitting, good clean edge. Small split to brass ferrule but the ferrule will hold.
£38.00 inc VAT
Record No.020 Compass Plane [Pre-owned]Record No.020 Compass Plane [Pre-owned]
Record No.020 Compass Plane [Pre-owned]
This plane probably dates from about the 1980’s and is in very good condition. There is relatively little wear to the sole and all the things to check for in these planes have all passed (the sole moves freely, no cracks in the casting, all original parts, mouth rivets are not proud of the sole, the lateral blade adjuster works properly, full convex and concave range etc etc). This is very...
£125.00 inc VAT
Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned]Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned]
Sold
Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned]
This is in very good order with original Stanley iron. The sole moves adjust freely. There is a small indent at one edge of the sole (very small indeed but we do try to be very accurate in our descriptions). This indent (1mm) is outside the edge of the planning track and we do not think this would affect performance.
£125.00 inc VAT
1/2” Mortise Chisel – Brades & Co. [Pre-owned]1/2” Mortise Chisel – Brades & Co. [Pre-owned]
1/2” Mortise Chisel – Brades & Co. [Pre-owned]
As good as you’ll get if you want an old-style oval handles mortise chisel. This bad boy hasn’t done any work we think.
£30.00 inc VAT
6 Pattermakers gouges [Vintage]6 Pattermakers gouges [Vintage]
6 Pattermakers gouges [Vintage]
These are well looked after patternmakers cranked paring gouges. Different makers and non-matching handles. These came from a pattern maker in the West Midlands area of England. A pattern maker is often referred to as the “king of trades” and whenever we get hold of pattern makers hand tools they are generally in very good condition, as is the case here. 12” “ to 16“...
£85.00 inc VAT
Record 071 Router Plane [Pre-owned]Record 071 Router Plane [Pre-owned]
Sold
Record 071 Router Plane [Pre-owned]
Complete with 3 cutters, depth stop and fence.
£105.00 inc VAT
A Family of J Rabone & Sons Engineers Spirit Levels [Vintage]A Family of J Rabone & Sons Engineers Spirit Levels [Vintage]
A Family of J Rabone & Sons Engineers Spirit Levels [Vintage]
Baby level is 6” long by 1” wide by 1 1/4” high Mummy level is 7 ¾” long by 1 1/4” wide by 1 1/2””high Daddy level is 12 “ long by 1 ½” wide by 2 ½”high. Each have a protective rotating cover for the main horizontal vial. The small lateral horizontal vial and the short vertical vial bubbles are all working...
£145.00 inc VAT
Clifton Anniversary Plane Set – 7 Planes [Rare]Clifton Anniversary Plane Set – 7 Planes [Rare]
Clifton Anniversary Plane Set – 7 Planes [Rare]
A wonderful set of 7 Limited Edition Clifton Anniversary Planes 2010 – for users & collectors. This is one of just twelve full sets known to have been sold from this well respected Sheffield plane maker. (Note - Classic Hand Tools sold the vast majority of the planes when they were launched as a limited edition, so we are very confident of our numbers). You are buying a small slice...
£3,450.00 (VAT exempt)
Norris No.13 Smoothing Plane [Vintage]Norris No.13 Smoothing Plane [Vintage]
Revised
Norris No.13 Smoothing Plane [Vintage]
Steel soled Norris smoothing plane with pinned parallel patent metal sides and attractive rosewood infill. Alex Mathieson & Son iron ( 1 ½” remaining at least) and matching cap iron. The lever cap is stamped Norris London. This was once owned by an A Kirkland, whose name is on the rosewood, AK initials on the plane bed and quite discreetly dotted on one of the steel sides. The...
£395.00 (VAT exempt)
Auriou Rasp-stitchers Hammer [Rare, Vintage]Auriou Rasp-stitchers Hammer [Rare, Vintage]
Auriou Rasp-stitchers Hammer [Rare, Vintage]
This is from the Auriou Toolworks forge in France. The handle is boxwood and has the distinct wear marks where the “stitcher” held the handle with his fingers for many years. A “stitcher” is the person who applies the teeth to the face of the rasp which would be held in a lead bedded anvil (to avoid “bounce”). The teeth are applied in diagonal rows and this...
£225.00 inc VAT
36” Straight Rule [Rare, Vintage]36” Straight Rule [Rare, Vintage]
Revised
36” Straight Rule [Rare, Vintage]
Made from beech with brass edges and ends, this is a lovely rule with clear markings on the upper face which has one bevelled edge. 36” long, ½” thick and 2 ¼” deep. So this is a heavy rule which was desirable so it didn't slide about. The person who owned it told Classic Hand Tools that is was used in aTailors shop. This is perfectly believable but it...
£55.00 inc VAT
3 Henry Taylor Fishtail Carving Gouges [New, Clearance]
Last Ones!
3 Henry Taylor Fishtail Carving Gouges [New, Clearance]
Last Ones!
£45.00 inc VAT
5 Henry Taylor Straight Carving Gouges [New, Clearance]
Last Ones!
5 Henry Taylor Straight Carving Gouges [New, Clearance]
Last 3 sets!
£75.00 inc VAT
Mortise & Tenon Magazine – Individual Editions, 1, 2 & 3 [Clearance]
Last Ones!
Mortise & Tenon Magazine – Individual Editions, 1, 2 & 3 [Clearance]
These magazines were combined into a compound hardback book Mortise & Tenon Issued 1-3 about 3 years ago. These are individual copies in excellent (unread) condition. Issue 1 Mortise & Tenon Magazine 2016 Issue 2 Mortise & Tenon Magazine 2016 Issue 3 Mortise & Tenon Magazine 2017
£75.00 inc VAT
Bessey KR60-2K Clamps x 4 Pack [Clearance, UK mainland only]
Bessey KR60-2K Clamps x 4 Pack [Clearance, UK mainland only]
UK mainland shipping only and excluding post codes AB31-56, BT 1-94, FK17-19, HS1-9, IM 1-99, IV1-63, KA, Kw1-9, PA 20-88, PH 15 - 50, PO 31-41, TR 21-25 & ZE1-3 and Guernsey & Jersey
£200.00 inc VAT
Scooped Adze by Muller – Austria [Clearance]Scooped Adze by Muller – Austria [Clearance]
Clearance
Scooped Adze by Muller – Austria [Clearance]
New but the edge needs to be re-sharpened. Great for hollowing and shaping. 450mm overall length with straight ash handle. 70mm wide cutting edge which is almost a semi circle. Normally retails for £103
£72.00 inc VAT
Henry Taylor Sheffield Fishtail Carving Gouges – Series 11 – 5 widths [New, Clearance]
Henry Taylor Sheffield Fishtail Carving Gouges – Series 11 – 5 widths [New, Clearance]
Clearance stock, From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Professional grade Sheffield made fishtail gouges series 11 – which is a tight curve. These...
£120.00 inc VAT
Norris No.20E Shoulder Plane [Rare, Vintage]Norris No.20E Shoulder Plane [Rare, Vintage]
Special Offer
Norris No.20E Shoulder Plane [Rare, Vintage]
This plane has been professionally restored although you wouldn't know this unless we told you as the restoration is perfectly done. The steel soled mouth is tight and true. Gunmetal body with lovely ebony infil and wedge. A very nice shoulder plane which bears the dings and marks of use. There is little left of the original Norris blade (clearly stamped with Norris London) hence the...
£375.00 inc VAT
Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]
Sold
Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]
A recent, used Stanley No.80 Scraper plane with a new Hock replacement iron. The plane is in good order with 100% black japanning and a flat sole for the 2 3/8” sole.
£55.00 inc VAT
Tissington Smoothing Plane [Vintage, Rare]Tissington Smoothing Plane [Vintage, Rare]
Special Offer
Tissington Smoothing Plane [Vintage, Rare]
Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
£195.00 inc VAT
Stonemasons Firesharp Chisels – 10 widths [Clearance]Stonemasons Firesharp Chisels – 10 widths [Clearance]
Revised
Stonemasons Firesharp Chisels – 10 widths [Clearance]
10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...
£240.00 inc VAT
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
Revised
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...
£320.00 inc VAT
Brusso Stainless Steel Hinges – CB302S [Clearance]Brusso Stainless Steel Hinges – CB302S [Clearance]
Clearance
Brusso Stainless Steel Hinges – CB302S [Clearance]
Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we now have just 2 pairs left (from 5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf...
£45.00 inc VAT
Norris A5 Smoothing Plane – original box [Vintage, SOLD]Norris A5 Smoothing Plane – original box [Vintage, SOLD]
Sold
Norris A5 Smoothing Plane – original box [Vintage, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£425.00 (VAT exempt)
Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]
Sold
Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£325.00 inc VAT
Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]
Sold
Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£325.00 inc VAT
Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]
Sold
Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£480.00 inc VAT
6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]
Sold
6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]
Attractive French Walnut handles for chisels, rasps etc. 5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist. The handles are pre-drilled with a 4mm diameter hole about 12mm deep. Clear lacquer finish. New old stock.
£35.00 inc VAT
Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]
Sold
Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]
2 3/8" wide Rob Cosman IBC plane & cap iron Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.140 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while the sides are precision-ground square to the bevel and hand-polished for optimal performance. Unused but...
£65.00 inc VAT
Lamello Minispot G2a [Clearance, As New, SOLD]Lamello Minispot G2a [Clearance, As New, SOLD]
Sold
Lamello Minispot G2a [Clearance, As New, SOLD]
G2A is the Minispot grooving machine for cutting out knots, resin pockets or damaged areas with patch size 2. The movable cover allows the groove to be cut very close to the rabbet edge, without the material thickness of the base plate coming into play. The transparent rear cover enables accurate positioning of the G2A over the relevant area, thus ensuring a perfect repair. We are not sure...
£245.00 inc VAT
Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]
Sold
Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]
Lamello Top 20 S2 Biscuit Jointer - New Old stock The Top 20S is considered superior to standard biscuit jointers for precision work, especially when using its adjustable height stop for parallel alignment. We have had this in our stock room for at least a decade. It has been quietly sitting in its original box, doing absolutely nothing at all. The winter months clean continues at Classic...
£395.00 inc VAT
Record No.3 Engineers Vice [Pre-owned, SOLD]Record No.3 Engineers Vice [Pre-owned, SOLD]
Sold
Record No.3 Engineers Vice [Pre-owned, SOLD]
UK mainland shipping only and excluding post codes AB31-56, BT 1-94, FK17-19, HS1-9, IM 1-99, IV1-63, KA, Kw1-9, PA 20-88, PH 15 - 50, PO 31-41, TR 21-25 & ZE1-3 and Guernsey & Jersey
£135.00 inc VAT
Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]
Sold
Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]
This clever and very well-made marking gauge is made by JessEm Tool Company in Canada and normally retails for about £135. The Model number is 08803. The Wood Sabre Metric Marking Gauge from The JessEm Tool Company is machined out of high-quality stainless steel, 6061 aluminium and anodised for durability. The design allows the user to dial in their scribe line from 0 up to 150mm. The bevelled...
£75.00 inc VAT
Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]
Sold
Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]
These bevel gear hand drills are very underrated examples of hand tool ingenuity. Our American friends seem to hold their clever design and functional efficiency in higher regard than user/collectors on this side of the pond (as they do wrenches and other seemingly simple tools). Fun to use. Note: there is a spring missing in the jaw mechanism, so clamping is slightly assymetric, but still central....
£24.00 inc VAT
Bessey Uni-Clamps - 4 Pack - 600mm [Clearance, UK mainland only, SOLD]
Sold
Bessey Uni-Clamps - 4 Pack - 600mm [Clearance, UK mainland only, SOLD]
UK mainland shipping only and excluding post codes AB31-56, BT 1-94, FK17-19, HS1-9, IM 1-99, IV1-63, KA, Kw1-9, PA 20-88, PH 15 - 50, PO 31-41, TR 21-25 & ZE1-3 and Guernsey & Jersey
£80.00 inc VAT
Record 050 Combination Plane [Pre-owned, As New, SOLD]Record 050 Combination Plane [Pre-owned, As New, SOLD]
Sold
Record 050 Combination Plane [Pre-owned, As New, SOLD]
Never used. All in 90-100% as new condition (just the long bars are a little scruffy). Original tatty box but pretty much everything else including all the 18 cutters are in unused, untarnished condition. Instruction booklet.
£125.00 inc VAT
Preston Flat Soled Spokeshave – Nickel Plated [Vintage, SOLD]Preston Flat Soled Spokeshave – Nickel Plated [Vintage, SOLD]
Sold
Preston Flat Soled Spokeshave – Nickel Plated [Vintage, SOLD]
This attractive shave is the Preston 1391 shave with 2'' blade Original Preston iron with plenty of life left. .10'' overall. A very attractive which presents well with all original parts. A commission sale.
£75.00 (VAT exempt)
Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage, SOLD]Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage, SOLD]
Sold
Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage, SOLD]
Boxwood beauty!
£110.00 (VAT exempt)
Edward Preston Wide Shoulder Plane No.1368 [Vintage, SOLD]Edward Preston Wide Shoulder Plane No.1368 [Vintage, SOLD]
Sold
Edward Preston Wide Shoulder Plane No.1368 [Vintage, SOLD]
In full working order, this heavy-duty shoulder plane is supplied with a new Ray Iles iron as the previous owner has exhausted the original cutter (also supplied) 1 ¼” wide and 8 1/4” long. You can read all about Preston Shoulder planes at Preston Tool Reviews website An excellent alternative to the current new offerings by Lie Nielsen, Veritas & Clifton. The mouth...
£120.00 (VAT exempt)
King Deluxe Sharpening Stone – Monster Size [Pre-owned, Unused, SOLD]King Deluxe Sharpening Stone – Monster Size [Pre-owned, Unused, SOLD]
Sold
King Deluxe Sharpening Stone – Monster Size [Pre-owned, Unused, SOLD]
1000 grit unused Japanese King brand waterstone. 230mm x 100mm x 80mm. A little workshop dusty dirty but unused in original scruffy packaging. A commission sale.
£50.00 (VAT exempt)
Clifton Multi-Plane [Pre-owned, SOLD]Clifton Multi-Plane [Pre-owned, SOLD]
Sold
Clifton Multi-Plane [Pre-owned, SOLD]
This plane was made in small numbers as a copy of the Record 045 and Stanley 45 multi plane. It has been used only for demonstration and display purposes. In fitted box with 23 cutters plus the slitting cutter in a plastic wallet. 14 plough cutters from 4mm – 32mm 5 beading cutters 3.2mm – 12mm 2 tonguing cutters – 4.8mm & 6.4mm 2 ovolo cutters 6.4mm & 9.5mm One...
£295.00 (VAT exempt)
Jointer Plane and a Smoothing Plane [Pre-owned, SOLD]Jointer Plane and a Smoothing Plane [Pre-owned, SOLD]
Sold
Jointer Plane and a Smoothing Plane [Pre-owned, SOLD]
A very nice Record No.7 (made in England) and a Stanley Bailey 4 ½ - pre-owned both with beech handles. These are good quality examples of older planes which have been well cared for. Both have 2 3/8” wide irons with plenty of wear left in them. A commission sale.
£150.00 (VAT exempt)
Stanley Double Sided Rebate Plane – No.79 [Vintage, SOLD]Stanley Double Sided Rebate Plane – No.79 [Vintage, SOLD]
Sold
Stanley Double Sided Rebate Plane – No.79 [Vintage, SOLD]
A very crisp example of this classic little side rebate pane with original parts and good cutter life left. A nice little plane. Made in England. This plane is designed to help with accurately trimming dados, grooves and mouldings. The body houses two skew cutters set at a very low angle. 5 ½” overall. It also has a reversible nose for each side to allow for closer corner...
£65.00 (VAT exempt)
ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]
Sold
ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]
ECE brand beech plane with a convex sole (side to side, not front to back like a compass plane) for making channels. This plane has not been used and presents as new in its orginal box. A commission sale. 240mm x 70mm overall with 50mm convex blade.
£75.00 (VAT exempt)
Handsome Wooden Smoothing Plane with Hock blade [Pre-owned, SOLD]Handsome Wooden Smoothing Plane with Hock blade [Pre-owned, SOLD]
Sold
Handsome Wooden Smoothing Plane with Hock blade [Pre-owned, SOLD]
Fraser like! This handsome plane needs to be put to work (just like Fraser!)
£75.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 |