Record 05 SS Jack Plane [Vintage]Record 05 SS Jack Plane [Vintage]
Sold
Record 05 SS Jack Plane [Vintage]
With stained beech handles, this Stay-Set (SS) version of the No.5 jack plane is in excellent condition. Stay set refers to the 2-piece cap iron which makes the sharpening of the iron somewhat quicker as you do not have to disassemble the plane iron assembly. Dating from 1950 – 1965 2” wide blade. 1 ½” original iron remains. This may have been refurbished...
£75.00 (VAT exempt)
Marples M6 Jack Plane [Vintage]Marples M6 Jack Plane [Vintage]
Marples M6 Jack Plane [Vintage]
This Marples jointer plane has a 2 3/8” wide blade (original with correct cap iron and 1 ¾” left in the blade). A few scratches to the distinctive cherry red japanning. Nice handles (rosewood – we think). 18” overall Dating this plane is fun, which we will leave to you (suffice to say we think post 1940). Do your detective work here at this superb William...
£85.00 (VAT exempt)

3 Lovely Vintage Brass Backed Saws [Vintage]3 Lovely Vintage Brass Backed Saws [Vintage]
3 Lovely Vintage Brass Backed Saws [Vintage]
Refurbished to a high standard. E C ATKINS 13tpi X- CROSS CUT TENON SAW – DEEP BRASS BACK 14” BLADE – attractive closed handle with ATKINS medallion FROST DOVE STREET NORWICH – SPECIAL – 18tpi DOVETAIL SAW 9” BLADE, CLOSED BEECH HANDLE 12” SPEAR & JACKSON 13tpi X – CUT “Leapfrog” tenon saw All straight bladed. A lovely collection. A...
£115.00 (VAT exempt)
E.C.E Wooden Plane [Pre-owned]E.C.E Wooden Plane [Pre-owned]
E.C.E Wooden Plane [Pre-owned]
E C Emmerich Smoothing Plane - 48mm wide blade – Pre-owned We think this has not been used as it presents as new. Lacquered beech body with steamed beech sole. Wooden wedge. Made in Germany. A commission sale.
£80.00 (VAT exempt)

The Ward Collection – 4 Chisels & A Gouge [Vintage Sheffield edge tool making!]The Ward Collection – 4 Chisels & A Gouge [Vintage Sheffield edge tool making!]
The Ward Collection – 4 Chisels & A Gouge [Vintage Sheffield edge tool making!]
4 chisels and a magnificent gouge, all by Ward, Sheffield Ward & Payne 1 1/2” wide Firmer Chisel Refurbished 1 ½” wide chisel by Ward & Payne, Sheffield. Attractive London pattern boxwood handle and brass ferrule. Blade is 7” long, 16” overall. 1 ¼” wide bevel edge paring chisel by WARD W & P. Waisted round hardwood...
£145.00 (VAT exempt)
RARE - 7 Cooper & Sons FULUSE Brand Chisels [Pre-owned]RARE - 7 Cooper & Sons FULUSE Brand Chisels [Pre-owned]
RARE - 7 Cooper & Sons FULUSE Brand Chisels [Pre-owned]
5 FULUSE bevel edge & 2 FULUSE firmer chisels, all with makers stamp or label on the handle. 3/16”, 3/8”, 5/8”, 1” & 1 3/8” FULUSE bevel edge chisels. 2 FULUSE registered firmer chisels – ¼” & 11/16” Made from superior forged high carbon steel by Sheffield maker Cooper & Sons who were in existence from 1930’s and...
£115.00 (VAT exempt)

Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]
Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]
Despite many years of handling various gauges, we hadn’t seen this particular gauge before so we enjoyed playing with the adjustable tilting head. The clear patent dates on the reverse of the fence led us to the maker BATES of BLOOMSBURG OCT 20 1896, USA Link to patent source notes Directory of American Tool and Machinery Patents Jim Bode sold one of these in the not-too-distant...
£100.00 (VAT exempt)
Norris A17 Smoother Plane [Rare, Vintage]Norris A17 Smoother Plane [Rare, Vintage]
Norris A17 Smoother Plane [Rare, Vintage]
This is a commission sale of a rare A17 Norris coffin shaped smoother. Gunmetal sides with sweated steel sole and steel pins. Attractive rosewood infill which needs a very light cleaned to get rid of a few grimy marks, paint splatter etc. The rosewood will respond delightfully and hopefully the photographs already do justice to the rich rosewood colour. No major scratches or blemishes to...
£1,750.00 (VAT exempt)

Lie-Nielsen No.7 Jointer Plane [Pre-owned]Lie-Nielsen No.7 Jointer Plane [Pre-owned]
Revised
Lie-Nielsen No.7 Jointer Plane [Pre-owned]
In Good+ condition (G+) this plane is one of the most popular planes we sell at Classic Hand Tools. The plane has been used and shows cosmetic signs of use. Good blade life remaining. Cherry front knob and tote in nice order. Lie Nielsen box. A commission sale.
£445.00 (VAT exempt)
Tissington Smoothing Plane [Vintage, Rare]Tissington Smoothing Plane [Vintage, Rare]
Revised
Tissington Smoothing Plane [Vintage, Rare]
Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
£335.00 inc VAT

Carpenter’s Adze Head - Brades & Co No.385 [Vintage]Carpenter’s Adze Head - Brades & Co No.385 [Vintage]
Carpenter’s Adze Head - Brades & Co No.385 [Vintage]
This is in G++ condition. Carpenter’s Adze Head - Brades & Co No.385
£30.00 inc VAT
Japanese Mortise Chisel – 12mm wide [Pre-owned]Japanese Mortise Chisel – 12mm wide [Pre-owned]
Special Offer
Japanese Mortise Chisel – 12mm wide [Pre-owned]
A stout fella but with 80mm of blade left, enough for the building of a temple or two. 245mm overall. Red Oak handle. Steel strike hoop and ferrule. Little used. Makers stamp but we can’t identify the maker.
£24.00 inc VAT

IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned]IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned]
IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned]
Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
£295.00 inc VAT

Veritas Router Plane Bundle! [Pre-owned]Veritas Router Plane Bundle! [Pre-owned]
Sold
Veritas Router Plane Bundle! [Pre-owned]
Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
£345.00 inc VAT
Veritas Combination Plane with storage box & 7 cutters [Pre-owned]Veritas Combination Plane with storage box & 7 cutters [Pre-owned]
Special Offer
Veritas Combination Plane with storage box & 7 cutters [Pre-owned]
Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
£495.00 inc VAT

Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]
Special Offer
£455.00 inc VAT
Lie-Nielsen Toolworks - Curved Boggs Spokeshave with leather case -  [Pre-owned]Lie-Nielsen Toolworks - Curved Boggs Spokeshave with leather case -  [Pre-owned]
Special Offer
Lie-Nielsen Toolworks - Curved Boggs Spokeshave with leather case - [Pre-owned]
Pre-owned but little used in Lie-Nielsen leather case.
£175.00 inc VAT

Stonemasons Firesharp Chisels – 10 widths [Clearance]Stonemasons Firesharp Chisels – 10 widths [Clearance]
Revised
Stonemasons Firesharp Chisels – 10 widths [Clearance]
10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...
£240.00 inc VAT
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
Revised
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...
£320.00 inc VAT

7 Pneumatic Stone Carving Tools - Auriou [Clearance]7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Clearance
7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Yes! The blacksmiths at legendary French artisan tool makers AURIOU TOOLWORKS also used to make tools for stone sculptors who use air powered chisels for their work. A bit noisy for us (and them maybe because they have stopped making them!) We have 3 gouges: 10mm wide, 15mm wide and 20mm wide. Also 2 snakes tongue (pied a biche) tools - for heavy shaping work (10 & 15mm wide) And 2 point...
£100.00 inc VAT
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
Clearance
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
New - just having a good old clean out and this is a bit of a bargain for woodturners This Robery Sorby system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And...
£115.00 inc VAT

Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]
Clearance
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]
New This system (RSTM-SCT3) comes with the carbide square cutter plus the following titanium nitride cutters RSTM-GT2 Excelsior Detail Point Cutter RSTM-GT4 Excelsior French Curve Cutter RSTM-GT6 Excelsior Teardrop Inside/Outside Cutter RSTM-GT7 Excelsior Mushroom Cutter
£115.00 inc VAT
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]
Sold
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]
These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be stuck with a mallet when working on large sculptures. but of course, they can be used by hand to shape work without whacking with a mallet as required. The old Flexcut code is MC 302 which...
£14.00 inc VAT

Karl Holtey 2 1/8'' Plane Blade [Clearance]Karl Holtey 2 1/8'' Plane Blade [Clearance]
Special Offer
Karl Holtey 2 1/8'' Plane Blade [Clearance]
Unused old stock. Stamped HOLTEY. Also stamped “s”. 4” overall. 2 1/8” wide. 3/16” thick. 4 positioning holes.
£40.00 inc VAT
Brusso Stainless Steel Hinges – CB302S [Clearance]Brusso Stainless Steel Hinges – CB302S [Clearance]
Clearance
Brusso Stainless Steel Hinges – CB302S [Clearance]
Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...
£42.00 inc VAT

Brusso Stainless steel shelf support K-10S [Clearance]Brusso Stainless steel shelf support K-10S [Clearance]
Clearance
Brusso Stainless steel shelf support K-10S [Clearance]
The K-10S stainless steel shelf support pin comprises a decorative turned support and a cylindrical peg. Stainless steel gives the pin a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4 – you are buying 2 sets (8 shelf...
£50.00 inc VAT
Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]
Sold
Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]
Oooh! – this is magnificent. 2 ¼” edge, an impressive 20” overall with a long handle (7 ½”) & 1 5/8” brass ferrule. We think the handle and ferrule may not be original, but this doesn’t distract from the overall appeal of this monster. It has been sharpened and for a chisel that is possibly 125 years old it is in superb condition. No pitting...
£125.00 (VAT exempt)

DMT Flattening Plate [Pre-owned, SOLD]
Sold
DMT Flattening Plate [Pre-owned, SOLD]
160 Mesh / 95 Micron 'Fine' 10” x 4 “ (250mm x 100mm) Little used we judge. Selling new for about £199 A commission sale.
£105.00 (VAT exempt)
1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]
Sold
1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]
This is perfectly functional chisel which has been refurbished nicely to include a replacement boxwood London Pattern Octagonal handle. 1” wide, bevel edged, the tang is cranked so to allow for knuckle clearance whilst paring. 13 1/2” overall. (Note - it is difficult to find a new equivalence to give you a price guide, however a shorter bevel edge cranked 1” wide chisel from...
£42.00 (VAT exempt)

Bristol Design Thumb Plane [Pre-owned, SOLD]Bristol Design Thumb Plane [Pre-owned, SOLD]
Sold
Bristol Design Thumb Plane [Pre-owned, SOLD]
A very attractive plane. 5” long x 1 ½” wide with a 11/4” wide blade Steel sole to gunmetal sides Ebony infill Brass lever cap and knurled screw A few blemish marks. The rear left cheek has been resting against something in a tool box. This has caused some discolouration (see photo) and a few pin prick holes in the metal over maybe 1cm. Originally, we...
£145.00 (VAT exempt)
Robert Sorby Framing Chisel – 1 1/4'' (32mm) [Pre-owned, SOLD]Robert Sorby Framing Chisel – 1 1/4'' (32mm) [Pre-owned, SOLD]
Sold
Robert Sorby Framing Chisel – 1 1/4'' (32mm) [Pre-owned, SOLD]
Overall Size: 495mm Blade Length: 267mm Width 32mm This hasn’t done much work at all! So please put me to work!
£54.00 inc VAT

Old Grannies Tooth Router [Pre-owned, SOLD]Old Grannies Tooth Router [Pre-owned, SOLD]
Sold
Old Grannies Tooth Router [Pre-owned, SOLD]
This tool is larger than your usual granny. She measures 240mm x 90mm x 65mm She has 10mm, 12mm, 14mm, 16mm & 18mm wide straight blades which are currently crudely sharpened and would benefit from being refined (not a difficult task). Not elegant or refined like most grannies but adorable nevertheless!
£30.00 inc VAT
Gifkins Dovetail Jig with F5 Template Upgrade [Pre-owned, SOLD]Gifkins Dovetail Jig with F5 Template Upgrade [Pre-owned, SOLD]
Sold
Gifkins Dovetail Jig with F5 Template Upgrade [Pre-owned, SOLD]
This Dovetail jig and upgrade template can be studied further on the Gifkins Dovetail Jig page of our website to see if it suits your needs. It is simple to use and will make box making a simpler task for those who like to use a router. We are offering these as a combined special package that would normally set you back £550 They are pre-owned however the jig has been sparingly used...
£360.00 inc VAT

Pfeil Drawknife - 110mm blade [Pre-owned, SOLD]Pfeil Drawknife - 110mm blade [Pre-owned, SOLD]
Sold
Pfeil Drawknife - 110mm blade [Pre-owned, SOLD]
Offset cherry handles. 290mm overall. For small scale shaping. Used but with plenty of life left. Could do with a re-sharpen.
£28.00 inc VAT
Clifton Convex & Concave Spokeshaves [Pre-owned, SOLD]Clifton Convex & Concave Spokeshaves [Pre-owned, SOLD]
Sold
Clifton Convex & Concave Spokeshaves [Pre-owned, SOLD]
Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
£155.00 inc VAT

Sargents Woodscrew Sets (5/8'', 3/4'' & 1'') [Vintage, SOLD]Sargents Woodscrew Sets (5/8'', 3/4'' & 1'') [Vintage, SOLD]
Sold
Sargents Woodscrew Sets (5/8'', 3/4'' & 1'') [Vintage, SOLD]
Vintage screw boxes, for cutting thread onto wooden dowels. To cut 5/8”, ¾” & 1” diameter threads on dowels. With taps in original boxes. Made in England.
£85.00 inc VAT
ECE Dovetail Plane [Pre-owned, SOLD]ECE Dovetail Plane [Pre-owned, SOLD]
Sold
ECE Dovetail Plane [Pre-owned, SOLD]
This is a beech bodied plane with a hornbeam sole from German maker E C Emmerich, founded in Germany in 1852. The skew blade is wedged with adjustment made by striking the strike button at the rear of the plane to loosen the wedge before tapping the iron to adjust depth. A simple thumbscrew loosens the knicker iron for adjustment. There is little wear to this plane, and the strike button shows...
£75.00 inc VAT

Veritas Dual Marking Gauge [Pre-owned, SOLD]Veritas Dual Marking Gauge [Pre-owned, SOLD]
Sold
Veritas Dual Marking Gauge [Pre-owned, SOLD]
This pre-owned dual marking gauge has seen little use. This is what we say about this tool in our main Veritas section “The Veritas Dual Marking Gauge has two independently adjustable rods, which will allow you to set two measurements at once, so you can quickly alternate between them when transferring or marking repetitive dimensions. Projection up to 5-3/4" is easy to set since an...
£34.00 inc VAT
Veritas Skew Rebate Plane – Right Hand – A2 blade [Pre-owned, SOLD]Veritas Skew Rebate Plane – Right Hand – A2 blade [Pre-owned, SOLD]
Sold
Veritas Skew Rebate Plane – Right Hand – A2 blade [Pre-owned, SOLD]
This plane is in very good condition G++ This is what we write about this plane in our main Veritas Tools section ''Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts...
£210.00 (VAT exempt)

Veritas Skew Block Plane – Right Hand [Pre-owned, SOLD]Veritas Skew Block Plane – Right Hand [Pre-owned, SOLD]
Sold
Veritas Skew Block Plane – Right Hand [Pre-owned, SOLD]
The Veritas Skew Block Plane is a versatile plane that excels at trimming rebates and planing end grain. Of course, you can also use it as a normal block plane. Its Norris-style adjuster guarantees precise blade setting. Machined and surface ground, the 162 x 44mm body is ductile cast iron. It has a 12° bed angle and a movable toe fully enclosed by the body casting. A bubinga knob locks the toe...
£195.00 (VAT exempt)
Veritas Honing Guide Bundle [Pre-owned, SOLD]
Sold
Veritas Honing Guide Bundle [Pre-owned, SOLD]
This bundle includes: The Veritas Mark II Honing Guide with standard clamping head, straight roller base and angle registration jig. This accepts blades between 1/2'' and 2 7/8'' wide and up to 15/32'' thick, including skew blades. It hones bevel angles from 15° to 54° and back bevels from 10° to 20°. Veritas Narrow Blade-Head which accepts blades from...
£120.00 (VAT exempt)

Blue Spruce Toolworks – Small Marking Knife [Pre-owned, SOLD]Blue Spruce Toolworks – Small Marking Knife [Pre-owned, SOLD]
Sold
Blue Spruce Toolworks – Small Marking Knife [Pre-owned, SOLD]
Beautiful rosewood handle - sparingly used (if at all), this another classic from the old stable of Blue Spruce tools. 7'' overall.
£85.00 inc VAT
Blue Spruce Toolworks – A pair of Skew chisels [Pre-owned, SOLD]Blue Spruce Toolworks – A pair of Skew chisels [Pre-owned, SOLD]
Sold
Blue Spruce Toolworks – A pair of Skew chisels [Pre-owned, SOLD]
Beautiful rosewood handles – left and right 3/8'' skew chisels in original packaging. 9'' overall.
£150.00 inc VAT

Blue Spruce Toolworks – 1'' Bevel Edge Chisel [Pre-owned, As New, SOLD]
Sold
Blue Spruce Toolworks – 1'' Bevel Edge Chisel [Pre-owned, As New, SOLD]
Resin Infused Maple handled Blue Spruce bench ''OPTIMA'' chisel. 9'' overall. This has its original wax protection on the blade (and that is maybe why the photo appears a little odd!) Pre-owned but as new.
£110.00 inc VAT
Blue Spruce Toolworks – Maple Headed Mallet [Pre-owned, SOLD]Blue Spruce Toolworks – Maple Headed Mallet [Pre-owned, SOLD]
Sold
Blue Spruce Toolworks – Maple Headed Mallet [Pre-owned, SOLD]
Resin Infused Maple headed Blue Spruce mallet with African Blackwood handle. Absolutely gorgeous! If I was a mallet, I would fancy the socks off her/him/it! 9'' overall 2'' 1/8” diameter head 13 oz Pre-owned but this hasn’t bashed much, if at all.
£145.00 inc VAT

Lie–Nielsen Scrub Plane – LN 40 1/2 [Pre-owned, SOLD]Lie–Nielsen Scrub Plane – LN 40 1/2 [Pre-owned, SOLD]
Sold
Lie–Nielsen Scrub Plane – LN 40 1/2 [Pre-owned, SOLD]
This plane hasn’t done much scrubbing yet as judged by its full iron and excellent overall condition. Boxed. This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g. taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane. It is also useful for shaping irregular objects or creating an interesting, finished...
£185.00 inc VAT
Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]
Sold
Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]
This was a commission plane for an English customer. The plane is a skewed rebate plane with a 1 3/16'' blade set in a 1 7/8'' wide body with a full width fence that is ¾'' deep. The plane is 9 ¼'' long. It has a nicked iron as shown in the photograph and a full length brass wear strip. Philly Planes stamped on the front of the plane. We can...
£250.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last