Robert Sorby Framing Chisel
The Robert Sorby Framing Chisel is the same principle as their registered chisel but with a longer blade and handle for deeper morticing work.
Overall Size:- 495mm
Blade Length:- 267mm
Robert Sorby Double Hooped Registered Chisel
Originally it was thought that registered (or shipwrights chisels) were used by barge builders and they first appeared in the mid 19th century. “strong ship” or registered chisels were also described in the Scottish tool manufacturer Mathieson’s catalogue of 1900. More recently these chisels have become very popular with joiners and timber framers for mortising. The double hoops give...
Robert Sorby Bevel Edged Framing Chisel
Very similar to the RS285 framing chisel that the blade is beveled to give extra clearance in the cut. Tapered along the length. Ash handle. Shorter than the RS285 - 388mm overall length.
Robert Sorby Timber Framer's Slick
This heavy duty timber framers and boat builders slick from Robert Sorby has an offset blade to allow for clearance when working in deep sockets and mortises. It can also be used as a massive paring chisel. Choice of two widths - 2-3/8" (60mm) & 3-3/8" (85mm).
Solid one piece forged blade including the heavy tang which is set deep into the handle. A heavy duty socket is fitted between...
Robert Sorby Heavy Duty Corner Chisel
A heavyweight 1" (25mm) wide bruzz (corner chisel) for cleaning up deep corners of mortises.
Ash Handle
Overall Size:- 380-407mm
Blade Length 239mm
Holster for Robert Sorby Timber Framer's Slick
A quality riveted leather holster for safer carriage of the Robert Sorby Timber Framer's Slick.
Robert Sorby Corner Chisel
Designed for squaring up the ends of mortises, grooves or housings. The faces are precision ground to produce clean, accurate 90 degree angles. Often used nowadays to clean up after a router. Sharpen each face individually with an oil stone.
The origins of this tool are from wheelwrights and millwrights who used a v shaped chisel to hollow out mortises in wheels and wooden beams (often referred...
Robert Sorby Diamond Sharpening File (40 micron)
The Robert Sorby Diamond Sharpening File is the ideal handy accessory for sharpening replaceable tool tips.
It can also be used on knives, scissors, even tungsten carbide router bits.
For maximum life lubricate with water during use.
Robert Sorby ProEdge Aluminium Oxide Belts
This common abrasive is designed primarily to sharpen carbon steel bench chisels, carving tools and plane irons but will also hone harder high speed steel tools.
The material longevity is at the lower end of the abrasives scale they use on their belts, but makes an excellent economical choice. Work your way through grit sizes (heavier grits for the removal of more material) to achieve a fine finish...
Robert Sorby ProEdge Sharpening System
The ProEdge is a revolutionary sharpening system introduced by Robert Sorby. In fact, the concept is far from new as the ProEdge largely replicates the tool sharpening system which has evolved in the Robert Sorby factory over many, many years. This compact system is now available to woodworkers whether operating in a large workshop or small shed.
Central to the ProEdge is an abrasive belt which...
Robert Sorby Buffing Mop
Buffing Mop to fit the ProEdge Sharpening Machine.
Also part of the Buffing Kit (PEBUFFKIT)
Robert Sorby Cutter Holder
The Robert Sorby Cutter Holder is a handy little accessory which will accept most of the Robert Sorby cutters.
It avoids skinning fingers when sharpening.
Tip not included.
Robert Sorby Fingernail Profiling Kit
The fingernail profiling kit is ideal for shaping those perfect fingernail sweeps on bowl and spindle gouges.
This set contains the arm and the boss but both items are available individually.
Robert Sorby Honing Paste
Applied to a buffing mop the honing paste creates a highly polished finish on any steel.
Robert Sorby Honing Wheel
Honing wheel to fit the ProEdge Sharpening Machine.
Also part of the Honing Kit (WPEPHONEKIT)
Robert Sorby Honing Wheel Arbor
Honing wheel arbor to fit the ProEdge Sharpening Machine.
Also part of the Honing Kit (WPEPHONEKIT)
Robert Sorby Honing Wheel Kit
This kit uses the abrasive honing wheel which can be shaped to allow for honing of gouge flutes - especially useful for woodcarving tools.
Items also available individually.
Robert Sorby Pigtail Mandrel
The Pigtail Mandrel to fit the ProEdge Sharpening Machine.
Also part of the Buffing Kit (PEBUFFKIT)
Robert Sorby ProEdge Buffing Kit
The Robert Sorby ProEdge Buffing Kit includes:
Robert Sorby ProEdge Pigtail Mandrel
Robert Sorby ProEdge Buffing Wheel
Robert Sorby ProEdge Ultra-Fine Buffing Compound
Robert Sorby ProEdge Ceramic Belts
This hardwearing material is a great choice for profiling and re-profiling damaged tools.
The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical.
Robert Sorby ProEdge Knife Holder Large
For hunting knives and those with blades over 8".
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Robert Sorby ProEdge Knife Holder Small
The Robert Sorby ProEdge Small Knife Holder can be used for pocket knives, carving knives and blades up to 8" long.
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Robert Sorby ProEdge Knife Jig Large
This larger knife holder is ideal for hunting knives and knives over 8" long. Both jigs can be adjusted using the collar on the arm to allow for steep and shallow sharpening bevels.
Note - The holders can be used with either the large or small jig, you do not need to buy both jigs.
Robert Sorby ProEdge Knife Jig Small
The knife jig consists of a back plate, raised wear plate, universal arm and knife holder. The kit comes with a set of full instructions. The small knife holder is ideal for pocket knives, carving knives and blades up to 8" long.
Note - The holders can be used with either the large or small jig, you do not need to buy both jigs.
Robert Sorby ProEdge Long Grind Jig
Helps you to create three different fingernail profiles.
Robert Sorby ProEdge Proset
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset.
By placing the gouge into the clamp of the profile arm and then extending the gouge up-to the required stop and locking it into place will allow for precise and repeatable bevel angles to be obtained.
Robert Sorby ProEdge Skew Jig
The Skew Jig allows the turner to accurately and safely sharpen his skew chisels.
Robert Sorby ProEdge Trizact Belts
Perhaps the most popular in the range of belts. This robust material is designed to handle the demands of all steels. Not strictly 'grit sizes' these belts are built using brick and pyramid abrasive shaping.
The highest 3000 'grit' size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.
Robert Sorby ProEdge Zirconium Belts
Designed for HSS tools, drill and router bits this material provides good value.
The 60 grit belt will tackle the most damaged surface. Use the 120 grit to provide a rewarding cutting edge and finish.
Robert Sorby Short Tool Platform with Arm
Increases access when tools are getting old and worn.
Robert Sorby Standard Gouge Jig
Allows easy sharpening of all standard ground woodworking gouges.
Robert Sorby Woodworkers' Square Guide
This simple to use jig has been designed as an upgrade to the current woodworking chisel jig (PESQ). This jig can be adjusted to ensure exact and repeatable 90 degree angles can be achieved every time. A stepped plate raises the tool to be sharpened away from the tool platform.
Ideal for sharpening chisels and plane irons.
Robert Sorby Woodworking Chisel Jig
Accurately ensures a straight cutting edge on any woodworking chisel.
Robert Sorby Leather Edge Guards
We highly recommend edge guards to protect yourself and your tools.
The chisel guards are available in 1", 1½" and 2" sizes, these tough leather guards are a snug fit for both the 285 and 286 framing chisels.
The slick guards are available in 60mm and 85mm sizes suitable for the 289 framer's slicks.