Sort By
Per Page
View
Grid
List
Robert Sorby Medium Tear-drop Scraper
The Robert Sorby Medium Tear-drop Scraper, like its big brother (Large Tear-drop RS-213C) provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved...
Robert Sorby Round End Swivel Tip
The Robert Sorby Round End Swivel Tip is an excellent choice for removing waste material very quickly especially undercutting. A true work horse designed for the multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below)
Sharpening: Use a diamond file or honing stone flat across the face. To gain best results and increase the longevity of the cutter this simple procedure...
Robert Sorby Side & End Swivel Tip
The Robert Sorby Side End Swivel Tip is designed to create parallel sides on boxes and vases. This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Related Products:...
Robert Sorby 1/4'' & 1/2'' Bead Cutting Tip
The Robert Sorby Bead Cutter is one of five additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 1/4" and 1/2" and is one of two beading cutters available for this tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity...
Robert Sorby 3/8' & 5/8' Bead Cutting Tip
The Robert Sorby Bead Cutter is one of a few additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 3/8" and 5/8" and is one of two beading cutters available for this tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity...
Robert Sorby 1/4'' & 1/2'' Cove Cutting Tip
The Robert Sorby Cove Cutting Tip is one of five additional cutters available for the popular Robert Sorbyn Multi-tip Hollowing Tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
This cutter is designed for use with the following tools:
Multi-tip...
Robert Sorby 3/8' & 5/8' Cove Cutting Tip
The Robert Sorby Cove Cutting Tip is one of a few additional cutters available for the popular Robert Sorbyn Multi-tip Hollowing Tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
This cutter is designed for use with the following tools:
Multi-tip...
Robert Sorby Recessing & Dovetailing Cutter
The Recess and Dovetail cutter (RS-234C) is the perfect tool for creating dovetails and recesses at 45 – 60º – ideal for creating a foot on a bowl.
Designed for use with: Multi-tip Hollowing Tool (RS-200KT and RS-200) and Swivel Tip Probe (RS-8803H)
High Speed Steel.
Robert Sorby Sandmaster
The Robert Sorby Sandmaster is an essential part of every turner's tool kit.
It comes with 5 different grits of abrasive to take even the roughest projects to a glass-like finish every time. It has an adjustable 2" velcro pad and comes complete with 2 each of 60, 120, 180, 240 & 400 grit sanding discs. You avoid the uneven finish often associated with hand sanding and there is no danger...
Robert Sorby Sandmaster 2'' Sanding Discs
Robert Sorby Sandmaster 2" velcro sanding discs.
Aluminium Oxide. Supplied in packs of 10
Robert Sorby Sizing Tool
The Robert Sorby Sizing Tool is used in conjuction with a parting tool to obtain accurate and consistent diameters up to 3" on spindlework. It fits either the Robert Sorby 3/8" beading and parting tool or bedan.
The two thumb screws lock the sizing tool firmly in place.
How to use:
Set the parting tool to the desired size with a steel rule – lock tool in position by tightening...
Robert Sorby 6 Piece Turning Tool Set
Beginners 6 Piece Woodturning Set in a box.
The ultimate full size, all round woodturning set. Perfect for the beginner for any type of turning from bowls to spindles. These 6 tools are also essential for the more experienced turner.
Contains:
3/4" Roughing Tool
1/8" Parting Tool
3/8" Bowl Gouge
3/8" Spindle Gouge
3/4" Oval Skew
1/2" Round Nose Scraper
A...
Robert Sorby Micro Woodturning Tool Set
Ideal for small projects such as model making or dolls house furniture.
A 5 piece set comprising 1/4" Spindle Gouge, 1/8" Spindle Gouge, 1/4" Round Nose Scraper, 1/4" Skew Chisel and 1/16" Parting Tool.
The tools have an overall length of 10".
Robert Sorby Pen Turning Set
The perfect pen turning tool set. All the tools needed to rough down the pen blank, clean up the ends and perfectly shape the finished pen.
Comprises 5/16" roughing gouge, 1/16" parting tool & 1/2" spindlemaster.
.png "Last Ones!")
Robert Sorby Gilt Edge Chisels - Rosewood
Gilt Edge chisel with rosewood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
These are being discontinued due to the difficulties of obtaining the rosewood.
Robert Sorby Patriot Chuck - Direct Thread
The Patriot lathe chuck was developed by Robert Sorby after many years of experience in selling, marketing and distributing another chuck. Hence the design incorporates all the key features which turners look for in a scroll chuck:
- compact design which does not strain lathe bearings yet is ideal for all sizes of project
- inserted system so there is a size to fit almost every lathe
- all jaws...
Robert Sorby Patriot Chuck - With Insert
The Patriot lathe chuck was developed by Robert Sorby after many years of experience in selling, marketing and distributing another chuck. Hence the design incorporates all the key features which turners look for in a scroll chuck:
- compact design which does not strain lathe bearings yet is ideal for all sizes of project
- inserted system so there is a size to fit almost every lathe
- all jaws...
Robert Sorby Bowl Reversing Jaws
Robert Sorby Bowl Reversing Jaws are designed for finishing the outside and foot of a bowl. Lightweight, but extremely strong solid aluminium construction with 10 different location points to hold a variety of sizes of bowl. Rubber grips hold the project in place without causing damage.
Maximum bowl diameter 9". 10" capacity over bed bars.
The photo shows the Bowl Reversing Jaws fitted to a...
Robert Sorby RSJDG Deep Grip Jaws
Robert Sorby Deep Grip Jaws have deep sides of these jaws make them ideal for large logs or awkward pieces of wood. They come with both internal and external dovetails to hold cumbersome pieces securely.
The photo shows the RSJDG Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Zero Jaws
These innovative jaws allow the turning of extremely fine, detailed pieces like lace bobbins as they close right down. The unique dome shape enables the turner to work close to his project. At the same time the dome can be used for internal gripping of larger projects without the fear of marking.
The photo shows the Zero Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Long Nose Jaws
Robert Sorby Long Nose Jaws have a reach of 4" allowing bowls to be remounted internally. The shape of the jaws allows easy access to the back of the project. Dovetailed internally and externally for extra versatility.
The photo shows the Long Nose Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ1 Jaws - 1' (25mm)
1" Jaws. With a fine internal and external dovetail, these 1" jaws are perfect for gripping miniature projects. The jaws expand from 25mm to 50mm and compress from 39mm down to 14mm.
Also compatible with Nova and Supernova chucks.
The photo shows the RSJ1 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ3 Jaws 2 3/4' (70mm)
2 3/4" Jaws. For larger projects and bowls up to 13" where a little extra grip is required.
The photo shows the RSJ3 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ4 Jaws 3 1/2' (89mm)
3 1/2" Jaws. Intended for bowls up to 16" needing substantial holding power.
The photo shows the RSJ4 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ5 Jaws 4 1/4'' (108mm)
Robert Sorby RSJ5 4¼" Jaws these jaws enable a much bigger recess or spigot to be held and are hence designed for bowls and platters over 16".
The photo shows the RSJ5 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ15 Jaws 1 3/8' (35mm)
1 3/8" Jaws. Designed for smaller projects like boxes and bowls up to 6".
The photo shows the RSJ15 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Pin Jaws 1' (25mm)
Robert Sorby 1" Pin Jaws have extra length of these jaws makes them suitable for awkward pieces of wood like burrs. Dovetailed on the inside and outside they are ideal for small projects or tall turned items like pepper-mills.
The photo shows the Pin Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Tool Rest Adjustment Collar
The Robert Sorby TRAC is the perfect addition for every woodturner.
It allows the tool rest height to be easily adjusted up or down, by up to 1/2” (13mm), by turning the outer adjustment ring.
The TRAC ensures the tool rest stays at the personally set height, even when the tool rest locking handle is released, allowing the tool rest to be moved to a new position without the need to reset...
Robert Sorby Tool Rest Stem
These stems work with the Robert Sorby Modular Tool Rest System.
Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish.
Stems are available in 1/2", 5/8", 3/4", 7/8", 1", 25mm, 28mm and 30mm diameters to fit most popular lathes.
Robert Sorby Tool Rest Crossbar 4'
Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut.
The cross bars from the new Modular...
Robert Sorby Tool Rest Crossbar 6'
Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut.
The cross bars from the new Modular...
Robert Sorby Tool Rest Crossbar 9'
Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut.
The cross bars from the new Modular...
Robert Sorby External Bowl Crossbar 9'
This modular tool rest system from Robert Sorby enables the turner to build up a collection of tool rests without going to great expense.
Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem.
Cross bars are specially hardened to avoid those troublesome nicks and...
Robert Sorby Steb Drive
The Robert Sorby Steb Drive uses the same principles as the original patented Stebcentre the Steb Drive conveniently fits in the jaws of a Patriot chuck. Its serrated teeth and spring-loaded centre pin create an unparalleled grip on wood.
Robert Sorby Deluxe Revolving Centre System
The Robert Sorby Hollow Revolving Centre Sets are available in 1 and 2 morse taper. Six different accessories - deluxe revolving centre, ring centre, hollow centre, location pin, 60 degree point, mini 60 degree point, and cup centre. These accessories make this a highly versatile system which will cater for almost every demand.
The boxed set also includes a useful ejection tool to remove the various...
Robert Sorby Box Scraper Platform
The modular tool rest system from Robert Sorby enables the turner to build up a collection of tool rests without going to great expense.
Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external. This box scraper platform can be used in conjunction with just one stem.
Cross bars are specially hardened to avoid those troublesome nicks and...
Robert Sorby Drawknife
10" cutting edge, ash handled draw knife. Straight back and straight blade with slightly splayed handles.
Robert Sorby Framing Chisel Set
On of each of the ever popular RS285 Robert Sorby Framing Chisel in 1'', 1 1/2'' and 2''.
Overall Size:- 495mm
Blade Length:- 267mm
Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
Robert Sorby Octagonal Handled Bevel Edged Chisel
Octagonal boxwood handle with brass ferule and leather washer.
Overall Size 265 - 340mm
Blade Length 127 - 178mm
Robert Sorby Traditional Bevel Edged Chisel
Traditional "carver" style boxwood handle with brass ferule and leather washer.
Overall Size 265 - 340mm
Blade Length 127-178mm
Robert Sorby Set of 5 Gilt Edge Chisels - Satinwood
Robert Sorby Gilt Edge chisel with Satinwood handle.
This set of 5 comes in a wooden presentation box and includes the following sizes: 1/4'', 3/8'', 1/2'', 3/4'' and 1''
Fitted with a tapered brass ferrule for comfort and elegance.
Robert Sorby Set of 5 Octagonal Handled Bevel Edged Chisels
Robert Sorby Set of 5 Octagonal boxwood handled Bevel Edge Chisels with brass ferule and leather washer in a cardboard presentation box.
Includes 1/4'', 3/8'', 1/2'', 3/4'' and 1'' chisels
Overall Size 265 - 340mm
Blade Length 127 - 178mm
Robert Sorby Boxed Set of 5 Traditional Bevel Edged Chisels
Set of 5 Robert Sorby Traditional "carver" style chisels with boxwood handle, brass ferule and leather washer in a cardboard presentation box.
Includes 1/4'', 3/8'', 1/2'', 3/4'' and 1'' chisels
Overall Size 265 - 340mm
Blade Length 127-178mm
Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle.
This set of 5 comes in a cardboard presentation box and includes the following sizes: 1/4'', 3/8'', 1/2'', 3/4'' and 1''
Fitted with a tapered brass ferrule for comfort and elegance.
Robert Sorby Thin Bladed Paring Chisel
Robert Sorby thin bladed paring chisels are traditionally used by pattern makers and now a favourite with cabinet makers, carpenters and joiners. Used for accurate hand paring and fitting without the use of a mallet.
Overall Size:- 380-407mm
Blade Length 248mm
Robert Sorby Sash Mortice Chisel
Used for light mortising work, boxwood/satinwood handle. A 2 degree taper prevents binding in the cut. Ideal for clearing out waste from mortices for tenons, locks and hinges. Can be used with a mallet.
Overall Size:- 279mm
Blade Length 159mm