Sort By
Per Page
View
Grid
List
Pfeil - 12 Piece Carving Set
The Pfeil 12 piece carving set has everything you need for all simple carving projects.
This twelve piece fully forged, ready honed set contains the following full size tools: 1/8, 1s/8, 5/8, 5/20, 7/6, 7/14,7L/20, 8/4, 8a/10, 9/10, 11/3, and 12/6.
This in plain English means:
8mm straight and skew chisels,
8mm & 20mm Series 5 gouges,
14mm & 6mm Series 7 gouges,
20mm Series 7 long...
Pfeil Heavy Duty Fishtail Gouges - Set of 4
This set of Pfeil heavy duty fishtail gouges contains the 4 most popular sizes:
D/60
2/60
5/60
7/60
Please see Heavy Duty Fishtail Gouges for the sweeps
Pfeil - 25 Piece Carving Set
This large fully forged Pfeil 25 piece carving set is for challenging carving projects and contains the roll case, 80mm wooden mallet, 2 genuine Arkansas stones, honing oil, carving knife and 20 full size carving tools.
The tools included are:1/16, 1s/16, 2/20, 3/3, 3/12, 3/25, 5/35, 7/20, 8/7, 8/18, 8/25, 9/7, 8a/18, 9/15, 7L/25, 11/2, 11/10, 15/3, 12/10 and 14/8.
This in plain english means
16mm...
Pfeil - 8 Piece Carving Set
This Pfeil 8 piece carving set is a starter set containing 7 full size fully forged tools and one chip carving tool. It is supplied in a rugged canvas roll case and the tools are honed and sharpened ready for use.
The tools included are 1/12, 1s/12, 5/12, 4/20, 7/10, 9/4, 12/8 and KERB12.
This in plain English means a 12mm chisel,
12mm skew chisel,
Series 5 12mm gouge,
Series 4 20mm gouge,
Series...
Pfeil 11 Piece Woodcarving Set
The Pfeil 11 piece woodcarving set has 11 full size tools supplied in a tool roll. The set was developed in collaboration with the National Trade School in Groden, South Tyrol.
Included in the set are 1S/10, 1S/20, 1S/30, 3/35, 4/20, 5/12, 7/10, 7/35, 11/5, 11/10 and number 12 (55mm) knife.
Pfeil Series 1 - Double Bevel Chisel
These are straight chisels with a double bevel. Straight chisels are used to carve the blank into rough form and to work on large areas.
Pfeil Straight Gouge - Series 2
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 3
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 4
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 5
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 6
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 7
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Series 7 and 8 sweeps are particularly useful for finishing work.
Pfeil Straight Gouge - Series 8
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. The broad range of sweeps and widths offered by Pfeil opens unlimited possibilities in sculpture carving.
Series 7 and 8 sweeps are particularly useful for finishing work.
Paul Adamson recommends the 25mm tool for making a Kuksa, his book can be viewed here
Pfeil Straight Gouge - Series 9
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. The broad range of sweeps and widths offered by Pfeil opens unlimited possibilities in sculpture carving.
The 15mm is one of our best selling Pfeil tools.
Pfeil Straight Gouge - Series 11
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Series 11 are the narrowest and are ideal for carving fine details like hair.
Pfeil Series 12 - 60° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
60°
Pfeil Fishtail Chisel - Series 1F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Fishtail Gouges Series 3F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Fishtail Gouges Series 5F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Fishtail Gouges Series 7F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
The 14mm in this series by Pfeil is a popular choice with our customers.
Blades are thin and light.
Pfeil Fishtail Gouges Series 9F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Arkansas Slipstones
Pfeil Arkansas Slipstones are available in four different profiles (see picture). They come separately, or, as a set of 4 in a wooden box.
The grit is in the region of 8000 and the size of the stones is approximately 60mm x 25mm 5mm
Pfeil Abegglen Detail Knives
These Pfeil Abegglen detail knives have two cutting edges. One side with round cutting edge and the other with a hollow cutting edge. As a result it is possible to make deep cuts but also to carve letters and ornamental work. A universal knife with many uses.
Small hexagonal oiled acacia wood handle.
Large: Blade Length 130mm, Cutting Edge 33mm.
Medium: Blade Length 125mm, Cutting Edge 27mm.
Small:...
Pfeil Arkansas Stone in Wooden Box
The Pfeil Arkansas Stone is a flat stone that comes in a wooden box. Use with a light honing oil. Arkansas stones are among the hardest and finest honing stones.
Grit is in the region of 8000
Size of Box - 150mm x 75mm
Size of Stone - 125mm x 50mm
Pfeil Back Bent Gouges Series 10
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Back Bent Gouges Series 20
The Pfeil Back Bent Gouges from Series 20 are expertly crafted for woodcarvers who require precision and versatility in their work. These gouges are specifically designed to handle hard-to-reach convex surfaces, making them an essential tool for intricate carving projects.
Specialised Design: The back-bent shape allows for easy access to challenging areas, perfect for undercuts and detailing...
Pfeil Back Bent Gouges Series 25
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Back Bent Gouges Series 28
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Back Bent Gouges Series 30
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Bench Chisel Set
Set of 6 Pfeil Bench chisels in a beechwood case.
Widths included are 6mm, 10mm, 12mm, 16mm, 20mm and 26mm.
Pfeil Brass Carving Mallets
These Pfeil Brass Carving Mallets have a brass head with cherry handle which are gentle on the wrist and elbow.
The MK Klein weighs 450g and the MK Gross weighs 700g.
Supplied in cardboard sleeve.
Pfeil Brienz Carving Knives
Pfeil Brienz carving knives are detail carving knives designed by the Brienz Woodcarving School.
Large - 190mm total length, blade 75mm
Small - 170mm total length, blade 60mm
Image shows the large knife.
Pfeil Butt Chisels
Pfeil Butt Chisels allow the maximum cutting control by allowing you to get very close to your piece of work. Ideal for cleaning up and fitting joints, modelling or working in a restricted space.
Octagonal handle with oval section, robust Acacia wood.
Razor-sharp finely honed blade, HRC 60.
Blade length 87mm and overall length 155mm
Pfeil Butt Chisels are available in 6mm (¼"),...
Pfeil Canard Knife
Pfeil Canard Knives are for very fine chip carving. They have plum handles and the blade has a straight cutting edge which is ground thin.
Large: The blade length is 45mm.
Small: The blade length is 30mm.
Pfeil Canvas Tool Rolls
Please note the tool rolls do not come filled with tools, this is for illustration purposes only.
Pfeil Carpenter Chisel Sets
Introduced in 2010 from Switzerland, Pfeil Carpenters Chisels have strong Elm wood octagonal handles with an oval section. We prefer these to the bench chisels.
The blades are forged from K 510 steel, hardened up to 60 RC. Bevel edged with well marked facets. The blades are finely ground and polished.
Bevel angle 25°, razor sharp.
4mm wide to 40mm wide.
Overall length 240-260mm.
The...
Pfeil Carpenter Chisels
Introduced in 2010 from Switzerland, Pfeil Carpenters Chisels have strong Elm wood octagonal handles with an oval section. We prefer these to the bench chisels.
The blades are forged from K 510 steel, hardened up to 60 RC. Bevel edged with well marked facets. The blades are finely ground and polished.
Bevel angle 25°, razor sharp.
4mm wide to 40mm wide.
Overall length 240-260mm.
Pfeil Carver's Slipstone
The Pfeil Carver's Slipstone is an Arkansas stone used for honing gouges and V parting tools.
The grit is in the region of 8000.
The size of the slipstone is approx 110mm x 40mm x 8mm
Use with a light honing oil.
Arkansas stones are among the hardest and finest honing stones.
Pfeil Chip Carving Knife - Kerb 11
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 11 also known as Detailschnitzmesser.
Use this knife to carve details, not specifically on chip carvings but for small objects or figures. The knife is used to create characters, using it for the details on faces for example or for small modifications.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade...
Pfeil Chip Carving Knife - Kerb 12
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 12 also known as Fuchmesser.
The most popular Pfeil knife for one-handed carving on small objects where the small piece of wood is held in one hand and the knife is used with the other hand. Compared to the Kerb 1 it has a curved blade which is not suitable for chip carving but which runs easily through the wood for rougher...
Pfeil Chip Carving Knife - Kerb 15
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 15 also known as Gebogen, 2 Schneiden.
This is a small knife to carve fine details on objects and figures. The curved blade cuts on both sides and has a pointy tip so it can be used in many ways. It is not suitable for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length...
Pfeil Chip Carving Knife - Kerb 7
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 7 also known as Kerbmesser.
This knife is for whittling or chip carving. The blade is curved so it will carve the wood easily but it cannot be used to carve straight lines as you can with the Kerb 1 or Kerb pfeil.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 40mm
Pfeil Chip Carving Knife - Kerb Pfeil
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb Pfeil also known as Kerbschnittmesser.
The most popular knife made for chip carving (definitely one of our best sellers!). The short pointy blade allows a good grip in the wood.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 36mm
Pfeil Chip Carving Knife - Kerb 3
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 3 also known as Konturenmesser.
A knife to carve contours on flat surfaces. Can also be used for chip carving, it has a smaller blade than the Kerb pfeil, which makes it even easier to use it to draw fine contours in wood, similar to a pencil.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade...
Pfeil Chip Carving Knife - Kerb 14
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 14 also known as Korbermesser.
This is a rather big and sturdy knife with a thick blade. It is used for basket weaving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Pfeil Chip Carving Knife - Kerb 1
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 1 also known as Rosenmesser.
A simple knife for chip carving with a straight blade. You can use it to carve patterns (geometric or simple flowers) as well as whittling.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 50mm
Pfeil Chip Carving Knife - Kerb 5
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 5 also known as Schnitzhaken.
For one-handed carving on small objects, with this specialist shape you can reach deepened areas from above. Not made specifically for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Pfeil Chip Carving Knife - Kerb 4
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 4 also known as Schnitzmesser.
This knife is for whittling and for simple small objects like little animals. The blade is too thick for chip carving but is sturdy enough for rough cutting.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 50mm