Sort By
Per Page
View
Grid
List
Lie Nielsen Carbide Burnisher
Creating a burr on a scraper requires a hard, highly polished surface.
The Lie Nielsen Carbide Burnishers have a 4" polished solid Carbide shank held in a Cherry handle. A flared Brass bolster protects your fingers while burnishing.
Lie-Nielsen Hand Scraper Blade Set
Lie-Nielsen Hand Scraper Set
A pair of 6" x 2 1/2" hand scrapers made from premium, high carbon Swedish Tool Steel.
One scraper is 0.02" thick, which makes a very flexible scraper. The second is 0.032" thick, which is much stiffer. These blades are ground square on the long edges, are easy to use and very handy.
Lie-Nielsen Scrub Plane
This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane.
It is also useful practical for shaping irregular objects or creating an interesting finished surface.
The Lie Nielsen Scrub Plane has a cast Iron body, 10¼" long. The blade is massive...
Sunshine Polishing Cloths (pair)
Keep your tools looking new! Safely cleans jewellery, gold, silver, brass, copper, glass, mirrors and most other surfaces, leaving a deep, long-lasting lustre.
Sold in pairs.
Rub surface to be polished with medium pressure. Non-scratching polishing and cleansing action works until cloth is completely darkened.
Do not wash. When it is darkened, discard.
Lie-Nielsen A2 Bevel Edge Chisels
Lie-Nielsen A2 bevel edge chisels - these will hold their edge longer than high carbon chisels and therefore require less frequent sharpening.
The chisel edges are square, parallel along the length, and very narrow so you can get into tight places. The backs are ground flat and finished by hand at 400 grit. The bevel is flat ground at 30°, but a higher secondary bevel (about 35°) is advisable,...
Lie-Nielsen Set of 5 Bevel Edge Chisels
The ever popular Lie-Nielsen A2 bevel edge chisels as a set. The most popular 5 sizes are included -
1/4", 3/8", 1/2", 3/4", 1".
This does not include a tool roll.
Lie-Nielsen Mortice Chisels
Designed with cabinetmaking in mind, these well-balanced Mortise Chisels are ground with parallel sides and are thicker than they are wide to help keep them straight in the cut.
Made of A2 Tool Steel, hardened to Rockwell 60-62, cryogenically treated and double tempered. Maine-harvested Hornbeam handles. Overall length is approximately 10.5".
The bevel is ground sharp at 30º, but a higher secondary...
Lie-Nielsen Fishtail Chisel 5/8''
Fishtail Chisels are perfect for reaching the back corners of half-blind dovetails and paring other hard-to-reach areas. Their unique shape offers versatility for right and left hand recesses.
Made from A2 Tool Steel, hardened to RC 60-62. Maine-harvested Hornbeam handles. Overall length is approximately 8".
The bevel comes ground sharp at 25º, but a higher secondary bevel is advisable,...
Lie-Nielsen Corner Chisel 3/8''
Producing square mortises is exacting work. The Corner Chisel, used after the mortise has been roughed out by hand or with a slot mortiser—which produces round edged mortises—helps square corners easily and precisely.
Made from A2 Tool Steel, hardened to RC 60-62 and ground razor sharp. Beveled at 30º. Comes with a Hickory handle. Overall length is approximately 10".
Currently...
Lie-Nielsen Chisel Handles
Lie-Nielsen chisel handles are made from Maine-harvested Hornbeam and can be used with any of the Lie-Nielsen chisels.
The standard handle is recommended for all but the largest chisels.
Long chisel handles are 4" longer than the standard handles. Excellent for paring.
The Mortise chisel handles are slightly larger in diameter and length than the standard chisel handle, the Mortise Chisel Handle...
Spare Blade for Lie-Nielsen 95 Edge Plane
Replacement blade for the Lie-Nielsen No. 95 Edge Planes. Comes with a 25° flat ground bevel.
1.105" wide x .125" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen Convex Sole Block Plane
Convex Sole Block Plane Blade
Replacement blade for the Lie-Nielsen No. 100-1/2 Convex Sole Block Plane. Comes ground with a 7/8" radius.
7/8" wide x 1/8" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 041 Small Shoulder Plane
Replacement blade for Lie-Nielsen No. 041 Small Shoulder Plane. Comes with a 25° flat ground bevel.
5/8" wide x .140" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 2 Bench Plane
Replacement blade for the Lie-Nielsen No. 2 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...
Spare Blade for Lie-Nielsen No. 40 1/2 Scrub Plane
Replacement blade for the No. 40-1/2 Scrub Plane. Comes ground with a 3" radius.
* 1.450" wide x 3/16" thick
* A2 Tool Steel
Spare Blade for Lie-Nielsen No. 7 1/2 Low Angle Jointer
Replacement blade for the Lie-Nielsen No. 7½ Low Angle Jointer Plane. Comes with a 25° flat ground bevel.
2.300" wide x .240" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 97 1/2 Small Chisel Plane
Replacement blade for the Lie-Nielsen No. 97½ Small Chisel Plane. Comes with a 25° flat ground bevel.
1¾" wide x 3/16" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No.112 Large Scraping Plane
Replacement blade for the Lie-Nielsen No. 112 Large Scraping Plane. A2 Tool Steel hardened to Rockwell 60-62, cryogenically treated and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror...
Spare Blade for Lie-Nielsen No.212 Small Scraping Plane
Replacement blade for the Lie-Nielsen No. 212 Small Scraping Plane. The blade is double tempered A2 Tool Steel, hardened to Rockwell 60-62. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...
Spare Blade for Lie-Nielsen No.85 Cabinet Maker's Scraping Plane
Replacement blade for the Lie-Nielsen No. 85 Cabinet Maker's Scraper. A2 Tool Steel hardened to Rockwell 60-62, cryogenically treated and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take...
Toothed Blade for Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane
Image shows non-toothed blade
Toothed Replacement blade for the Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane.
Toothed blades have small chisel-like teeth. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will...
Lie-Nielsen Chipbreakers
Fits Lie-Nielsen No. 3 Bench Planes.
Lie-Nielsen chipbreakers are made of High Carbon Tool Steel and are 1/8" thick with a .015" lip ground at a 2 degree angle to provide excellent contact between the leading edge of the chipbreaker and the blade. Very solid. Supplied with the chipbreaker screw.
* 1-3/4" wide
Lie-Nielsen chipbreakers are designed specifically for their tools. It is possible...
Spare Blade for Lie-Nielsen No. 3 Smoothing Plane
Replacement blade for Lie-Nielsen No. 3 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...
Roughing Blade for Lie-Nielsen No. 4 and 5 Planes
A blade with a cambered edge for the No.4 and No.5 planes. Used for thicknessing boards.
Spare Blade for Lie-Nielsen No. 4 and 5 Plane
Replacement blade for Lie-Nielsen No. 4 or 5 Bench Planes.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror...
Spare Blade for Lie-Nielsen No. 4 1/2, 5 1/2, 6 & 7 Plane
Replacement blade for Lie-Nielsen No. 4-1/2, 5-1/2, 6 or 7 Bench Planes.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will...
Spare Blade for Lie-Nielsen No. 8 Jointer Plane
Replacement blade for Lie-Nielsen No. 8 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...
Spare Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will increase performance, help achieve a razor edge quickly, and improve edge life in hardwoods.
* 2" wide x .175" thick
* A2 cryogenically...
Toothed Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
Toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes...
Spare Blade for Lie-Nielsen No. 60 1/2 Block Plane
Replacement blade for Lie-Nielsen No. 60 1/2 Adjustable Mouth Block Plane. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Toothed Blade for Lie-Nielsen No. 60 1/2 Block Plane
Lie-Nielsen toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow this with a fine-set Smoothing Plane.
Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots. We recommend that you hone your...
Spare Blade for Lie-Nielsen No. 507 Rebating Block Plane
Replacement blade for Lie-Nielsen No. 60 1/2 Rebating Block Plane. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Lie-Nielsen 50 Degree Frog
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches make smoothing difficult wood easier.
These 50 degree frogs will fit Lie-Nielsen...
Lie-Nielsen 55 Degree Frog
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches make smoothing difficult wood easier.
These 55 degree frogs will fit Lie-Nielsen...
Spare Blade for Lie-Nielsen No. 042 Medium Shoulder Plane
Replacement blade for Lie-Nielsen No. 042 Medium Shoulder Plane.
Comes with a 25° flat ground bevel.
* 3/4" wide x .140" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 073 Large Shoulder Plane
Replacement blade for Lie-Nielsen No. 073 Large Shoulder Plane.
Comes with a 25° flat ground bevel.
* 1 1/4" wide x .140" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 101 Violin Makers Plane
Replacement blade for our No. 101 Violin Maker's Block Plane.
Comes with a 25° flat ground bevel.
* 7/8" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 102 Low Angle Block Plane
Replacement blade for the Lie-Nielsen No. 102 Low Angle Block Plane.
The 1¼" wide 1/8" thick A2 steel blade comes with a 25° flat ground bevel.
Spare Blade for Lie-Nielsen No. 140 Skew Block Plane RH
Replacement blade for the right hand version of Lie-Nielsen No. 140 Skew Block Plane. Comes with a 25° flat ground bevel.
* 1 1/2" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 48 Large Tongue & Groove Plane
For use in Lie-Nielsen No. 48 Tongue & Groove Plane. Centres on ¾" stock, leaving a ¼" wide tongue and .3125" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint.
* Comes with a 25° flat ground bevel.
* 3/16" thick, O1 Steel.
!!!!Note:!!!! Blade does not work in vintage Stanley planes.
Spare Blade for Lie-Nielsen No. 49 Small Tongue & Groove Plane
For use in Lie-Nielsen No. 49 Tongue & Groove Plane. Centres on 1/2" stock, leaving a .166" wide tongue and .230" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint.
* Comes with a 25° flat ground bevel.
* 3/16" thick, O1 Steel.
!!!!Note:!!!! Blade does not work in vintage Stanley planes.
Spare Blade for Lie-Nielsen Small Bronze Spokeshaves
Replacement blade for the Flat or Curved Sole Small Bronze Spokeshaves. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen Boggs Spokeshaves
Replacement blade for the Curved or Flat Sole Boggs Spokeshaves.
Comes with a 25° flat ground bevel.
* 2" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
Lie Nielsen No.66 Bronze Beading Plane: Set of 5 Blank Cutters
Set of 5 blanks. Work with files to create your own shapes. This makes quick work of reproducing small pieces of molding for repair or restoration. Unhardened, 5/8" (1.58cm) wide.
Lie Nielsen No.66 Replacement Blades for L-N66
Seven hardened, double-ended blades will make 14 standard shapes. The blades will fit antique Stanleys as well, for those who have or acquire one without blades. Made from A2 Tool Steel, 5/8" (1.58cm) wide.
The blade profiles include:
1/16", 5/64", 1/8", 5/32", 3/16", and 1/4" Single Beads
3/32" and 1/8" Fluting
1/8" Double Reed
1/16" and 5/64" Triple Reeds
1/16" Quadruple Reed
3/32" Double Concave
3/32"...
Tite-Mark Standard
The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen.
The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head.
The Tite-Mark Standard (7" long shaft) is built around a 5/16"...