Sort By
Per Page
View
Grid
List
Lie-Nielsen Leather Saw Cases
Protect your Backsaw with this fitted Michigan Leather case. Use it for storage and transportation. Beautifully made in Maine.
Lie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket Chisel
Lie-Nielsen have gone big! After many years of it being discussed we have 1-1/2'' version of their beloved chisels.
The Lie-Nielsen Chisels are based on the Stanley 750 Bevel Edge Socket Chisels. Socket chisels are not common these days, perhaps because they are expensive to make, but Stanley and others once produced these chisels in a vast array. Socket chisel handles are less likely to...
Lie-Nielsen Small Spokeshave
This Lie Nielsen spokeshave is based on a lovely tool that hasn’t been available since Edward Preston and Sons went out of business in the 1930’s.
Lightweight but solid.
Redesigned for fine, precise shaping work in all woods.
Available with a flat or curved sole (1-1/2" radius).
6-3/4" long, with a 5/8" wide sole
Bronze body and cap with with an A-2 cyro blade...
Lie-Nielsen Boggs Spokeshave
The original Boggs Spokeshave is hefty and solid, weighing 12 oz. Designed for fine, precise shaping in all woods. Available with either a flat or curved sole.
Body is 10" long with a 1" wide flat sole.
The sole of the Curved Spokeshave has a gentle, 5" radius for working inside curves.
2" wide x 1/8" thick A2 blade.
Bronze body and cap.
Hickory handles.
Weight is 12 oz.
Boggs Concave Spokeshave
The Boggs Concave Spokeshave is a collaboration between Kentucky Master Chair Maker Brian Boggs and Lie-Nielsen Toolworks. A 2-5/8" diameter sole makes this tool the right choice for working chair spindles and other round parts.
Weight 8 oz. Body is 9-5/8" long, A-2 blade 1-1/8" x 1/8" thick, Bronze body and cap. Hickory handles.
Side Handle for the Lie-Nielsen No. 62 Low Angle Jack Plane
This powder-coated Aluminum 'Hot Dog' attaches to the side of the No. 62 Low Angle Jack Plane to make shooting more comfortable.
Lie-Nielsen Cross Peen Hammer
This small hammer is not only great for tacks and brads, but also for making fine blade adjustments on your planes.
Brass Head, 4 oz (115 grams).
Cherry handle
Overall size is 12'' (300mm) long and 4'' (100mm) wide
Lie-Nielsen Drawbore Pins
Drawboring is a great way to make a strong mechanical joint. A wooden pin is hammered through slightly offset holes in the two pieces, and pulls the joint together. You use Drawbore Pins to pull the joint together first (with some force and a twisting motion). This eases the edges of the hole, making driving the wood pin easier. You can also disassemble the joint if you want to work on the fit some...
Lie-Nielsen Countersink with Cherry Handle
Cherry handle with solid brass ferrule.
3 flute, 82° countersink.
Please note that wood handles have natural figure and colour variations in the wood grain and may not match the photo.
Lie-Nielsen Dowel Plates
If you want to make exact-sized dowels from any wood you choose, a Lie-Nielsen Dowel Plate is the best tool.
It's also handy to get a precise tenon on chair spindles. The Lie Nielsen plates are 1/4" x 5-5/8" x 1½" surface ground A2 tool steel. The holes are machined with 6-degree clearance taper on the underside, the holes are straight for the first .025"; so this tool can be sharpened many times...
Sand-Flex Hand Block
These hand blocks have fine silicon carbide abrasive embedded throughout the rubber block which quickly removes rust from Cast Iron and Steel.
3 1/4" long x 2" wide x 3/4" thick.
Available in fine, medium, and coarse grits. Note coarse is shown in the main product picture
Made in Germany.
Lie-Nielsen Honing Guide
The Lie-Nielsen version of the side clamping style of honing guide is solidly machined from Stainless Steel, with a Bronze bearing.
Their Honing Guide features removable jaws: it comes with a standard pair of jaws that fit most Lie-Nielsen blades, and additional jaws are available (sold separately) for Chisels 3/16" and under, tall jaws for Mortice Chisels, long jaws for very short blades and...
Lie-Nielsen Screwdrivers with Cherry Handles
These Lie-Nielsen screwdrivers are made to fit specific screws on Lie Nielsen tools. They may be useful for other jobs as well. Modelled after gunsmith's screwdrivers with machined tips, they are correctly sized to fit the screw slots, giving you good power and control without slipping. The Chipbreaker and frog adjustment screwdriver are particularly useful.
The blades are hardened 416 Stainless...
Lie-Nielsen Honing Guide Chisel Jaw Pair
The Lie-Nielsen Chisel Jaws fit their 1/8" and 3/16" Bevel Edge Chisels (as well as the 1/4" to 3/4" Bevel Edge Chisels).
Lie-Nielsen Honing Guide Mortice Chisel Jaw Pair
The Lie-Nielsen Mortice Chisel Jaws fit all Lie-Nielsen Mortice Chisels, as well as their 1" Bevel Edge Chisel.
Lie-Nielsen Honing Guide Long Jaw Pair
The Lie-Nielsen Long Jaws fits blades for all their spokeshaves and for all the following Lie-Nielsen planes: No. 610, 10¼, 041, 042, 073, 1/2, and 85.
These jaws are reversible. The short end hones a bevel up to 40° and the long end hones a bevel up to 30°.
Lie-Nielsen Honing Guide 18° Skewed Jaw Pair, Left Hand
The Lie-Nielsen 18° Skewed Jaw Pairs fit the Lie-Nielsen No. 140 Skew Block Plane (left or right hand).
The blade for the left hand No. 140 fits the left skewed jaws.
Lie-Nielsen Honing Guide 18° Skewed Jaw Pair, Right Hand
The Lie-Nielsen 18° Skewed Jaw Pairs fit the Lie-Nielsen No. 140 Skew Block Plane (left or right hand).
The blade for the right hand No. 140 fits the right skewed jaws.
Lie-Nielsen Honing Guide 30° Skewed Jaw Pair, Left Hand
These Lie-Nielsen 30° Skewed Jaws fit the Lie-Nielsen No. 98/99 Side Rabbet Planes (left hand).
Lie-Nielsen Honing Guide 30° Skewed Jaw Pair, Right Hand
These Lie-Nielsen 30° Skewed Jaws fit the Lie-Nielsen No. 98/99 Side Rabbet Planes (right hand).
Lie-Nielsen 12 Tool Chisel Roll
12 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Lie-Nielsen 7 Tool Chisel Roll
7 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Lie-Nielsen 9 Tool Chisel Roll
9 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Lie-Nielsen Mortice Chisel Roll
7 pocket leather tool roll, Brass fittings. Deeper tool roll accommodates the Lie-Nielsen mortise chisels. Beautifully made in Maine, USA.
Lie-Nielsen Holdfast
Inspired by the work of master blacksmith, Peter Ross. Cast Ductile Iron, hot oil finish. Fits a 3/4" diameter hole in a benchtop up to 4" thick (if your benchtop is thicker, you may need to relieve the bottom third of the hole to 1" diameter). Low profile, flexible enough to grip the work firmly, but easily loosened with a hammer.
Overall shaft length is 13" (33.0 cm)
Overall...