Sort By
Per Page
View
Grid
List
Henry Taylor Bowl Adze
Sheffield made hand forged adzes by Henry Taylor for single handed use.
This one is a tight gouge (sweep 9), however this lucky fella is outcannel which makes it a Bowl Adze.
At the other end to the cutting edge is a square faced hammer poll.
All Henry Taylor adzes have an ash handle of 250mm (about 10") .
The overall head size (from the square face of the hammer poll to the cutting edge)...
Henry Taylor Hand Adze Deep Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes; this one is a tight incannel gouge (sweep 9), and is offered with an incannel or outcannel grind.
The outcannel grind is favoured by those working concave surfaces as it allows the leading edge to enter the working area easier.
At the other end to the cutting edge is a square faced hammer...
Henry Taylor Hand Adze Shallow Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a gouge end with a shallow/mid gouge or there is a tight gouge (sweep 9) and a 50mm (2") straight edge (like a chisel).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size (from the...
Henry Taylor Hand Adze Straight Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a 50mm (2") straight edge (like a chisel) or curved end (like a gouge) with either a shallow/mid gouge or a tight gouge (sweep 9).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size...
Henry Taylor No.1 Straight Chisels
10% discount from price shown. Whilst stocks last!
Henry Taylor No.2 Skew Chisels
10% discount from price shown. Whilst stocks last!
.png "Last Ones!")
Henry Taylor No.1 Fishtail Chisels
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor...
Henry Taylor No.39 60° 'V' Parting Tools
10% discount from price shown. Whilst stocks last!
Henry Taylor No.3 Straight Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.5 Straight Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.7 Straight Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.9 Straight Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.3 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.5 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.7 Fishtail Gouges
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version...
Henry Taylor No.9 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.11 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor Woodcarving Punch - Triangle of Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Square Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Triangle
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Asterisk with solid centre
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Chain Link 1
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Circle
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Flower 1
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Moon
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Chain Link 2
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Thistle
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Clover Leaf
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Diamond
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Cross 1
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Anchor
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Flower 2
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Tipped Cross
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Tree
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Acorn
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Double Diamond
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Arrow Cross
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Heart
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - 3 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - 4 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - 4 x 2 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - 6 x 2 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - 2 x 2 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Flower 3
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Rounded Cross
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Cross 2
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Asterisk with open centre
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Medallion 1
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.