Brusso Brass Stop Hinge JB-103
The Brusso JB-103 brass square knuckled full mortice butt hinge is engineered with a built-in stop that allows a lid to remain open at 95°. It is milled from heavy brass stock and can be used when an additional stay is not desired. The leaf measures 1¼" in length.
Length: 1.250" - 1¼" - 32mm
Width: 0.618" - 5/8" - 16mm
Thickness: 0.187" - 3/16"...
Brusso Brass Stop Hinge JB-107
The Brusso JB-107 brass square knuckled full mortice butt hinge is engineered with a built-in stop that allows a lid to remain open at 95°. It is milled from heavy brass stock and can be used when an additional stay is not desired. The leaf measures 2" in length.
Length: 2.000" - 51mm
Width: 0.870" - 7/8" - 22mm
Thickness: 0.250" - 1/4" - 6mm
Leaf Thickness:...
Brusso Brass Stop Hinge JB-804
The Brusso JB-804 brass full mortice hinge is engineered with a built-in stop that allows a lid to remain open at 95°. The hinge is surface mounted and can be used when an additional stay is not desired. The hinge measures 1¼" in length.
Length: 1.250" - 1¼" - 32mm
Width: 1.040" - 1" - 26.5mm
Thickness: 0.188" - 3/16" - 5mm
NOTE - All Brusso...
Brusso Brass Stop Hinge JB-806
The Brusso JB-806 brass full mortice hinge is engineered with a built-in stop that allows a lid to remain open at 95°. The hinge is surface mounted and can be used when an additional stay is not desired. The hinge measures 2" in length.
Length: 2" - 51mm
Width: 1.490" - 1½" - 38mm
Thickness: 0.250" - ¼" - 6mm
NOTE - All Brusso hinges come in...
Brusso Jig TJ-101
For Brusso Stop Hinges JB101 and Butt Hinges CB301 (with or without ball finials).
Brusso Jig TJ-102
For Brusso Stop Hinges JB102 and Butt Hinges CB302 (with or without ball finials).
Brusso Jig TJ-103
For Brusso Stop Hinges JB103 and Butt Hinges CB303 (with or without ball finials).
Brusso Jig TJ-107
For Brusso Stop Hinges JB107 and Butt Hinges CB407 (with or without ball finials).
Brusso Jig TJ-638
For Brusso quadrant hinge HD638
Brusso Jig TJ-680
For Brusso quadrant hinges HD680.
Brusso Jig TJ-702
Compatible with Brusso HD-702
Brusso Jig TJ-804
Compatible with Brusso JB-804 and JB-804S
Brusso Jig TJ-818
Compatible with Brusso JB-818
Brusso Jig TJ-828
Compatible with Brusso JB-828
Brusso Jig TJ-L37
For Brusso knife hinges L-37 and L-39.
Brusso Jig TJ-SR638
For Brusso SR-301 and SR-638 side rail hinges.
Brusso Jig TJ-SR680
For Brusso SR-680 side rail hinge.
Brusso Stainless Ball Catch BC-263S
The Brusso BC-263S stainless-steel morticed ball catch, consisting of a stainless-steel cylinder with spring-loaded steel ball and a stainless-steel keeper, is used to secure cabinet doors. Stainless steel gives the ball catch a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The grooved sides of each half, measuring 1/4" in diameter, provide...
Brusso Stainless Ball Catch BC-265S
The Brusso BC-265S stainless-steel morticed ball catch, consisting of a stainless-steel cylinder with spring-loaded steel ball and a stainless-steel keeper, is used to secure cabinet doors. Stainless steel gives the ball catch a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The grooved sides of each half, measuring 11/32" in diameter, provide...
Brusso Stainless Ball Catch BC-275S
The Brusso BC-275S stainless-steel morticed ball catch, consisting of a stainless-steel cylinder with spring-loaded steel ball and a stainless-steel keeper, is used to secure cabinet doors. Stainless steel gives the ball catch a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The grooved sides of each half, measuring 7/16" in diameter, provide...
Brusso Stainless Hook MC-437S
The Brusso MC-437S stainless steel hook, with a flattened dome face ringed by a band-shaped edge, is pressure-fit and glued into place. Stainless steel gives the foot a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications.
It measures 3/8" in diameter and projects 15/16". The mounting dowel is 3/16" in diameter.
Brusso Stainless Offset Pivot Hinge L-23S
The Brusso L-23S stainless steel offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. Stainless steel gives the hinge a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The leaf measures...
Brusso Stainless Shelf Pin K-10S
The K-10S stainless steel shelf support pin comprises a decorative turned support and a cylindrical peg, which fits into the K-2 sleeve. Stainless steel gives the pin a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4.
Brusso Stainless Shelf Sleeves K-2S
The K-2S stainless-steel heavy-walled shelf support sleeve is mortised flush into the side of a case, providing an anchor for the K-10S shelf support pin. Stainless steel gives the sleeve a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The sleeve measures 3/8" in diameter x 7/16" deep. Supplied as a set of 12.
Sjobergs Nordic 1450 Bench & Storage Module 0042
The sturdy underframe of this Sjobergs Nordic Plus 1450 bench is made from Scandinavian pine and with the hard Nordic birch top the bench is built to last a lifetime of normal use. A double row of 19mm (3/4") dog holes run from each of the four vice locations, giving an endless opportunity to clamp your work. There are four mounting locations for the vices allowing you to configure the vices to...
Sjobergs Scandi 1425 Bench & Storage Module SM03
Sjobergs Scandi Plus 1425 workbench is made from European beech (trestle is pine), this bench storage module package is built to last a lifetime of normal use. A double row of 19mm (3/4") dog holes run from each of the 4 vice locations, giving endless opportunities to clamp your work. This Scandi Plus bench comes with the SM03 beech fronted accessory cupboard and drawer kit. (SM03 worktop area:...
Sjobergs Elite 1500 Bench & Storage Module SM03
EUROPEAN BENCH MAKING AT ITS FINEST!
Sjobergs Elite cabinetmaker benches are constructed in entirely European beech renowned for its toughness and longevity. The top is 85mm thick with a 110mm apron, ready treated with a premium quality enriching finishing oil. The specially developed vices provide enormous clamping power across their 740mm (23½") width as well as accuracy and smoothness....
Sjobergs Elite 2000 Bench & Storage Module SM04
EUROPEAN BENCH MAKING AT ITS FINEST!
Sjobergs Elite cabinetmaker benches are designed and built by experienced Swedish craftsmen. Constructed in European beech; the top is 85mm thick with a 110mm apron, ready treated with a premium quality enriching finishing oil. The specially developed vices provide enormous clamping power across their 600mm (23½") width, as well as providing amazing...
Sjobergs Original 1900 Bench & Storage Module SM05
EUROPEAN BENCH MAKING AT ITS FINEST!
Package deal comprises a Sjobergs SB119 Professional Workbench and a Sjobergs SM05 Storage Module.
The Sjobergs SB119 bench is the perfect foundation for any workshop. Versatility combines with strength and quality, to form a highly functional bench for a professional or a demanding home woodworker. The selected European beech used throughout the construction...
Crucible Iron Holdfast
The Crucible holdfast. Made from ductile iron in an Illinois family foundry that’s been in business for more than a century. Based on a French design salvaged from a barn. The last holdfast you are likely to need.
Since Roman times, the iron holdfast has been an essential piece of workbench equipment for carpenters, joiners and cabinetmakers. Yet many of us struggle with holdfasts that work...
Crucible Planing Stop
We have always loved blacksmith-made planing stops, which are embedded in the end of a block of wood that is about 3” x 3” x 12”. The block is friction-fit into a mortice in the benchtop and moves up and down with mallet taps.
In our experience, the planing stop is as important as the workbench’s face vice and has almost-endless uses.
The main problem with a blacksmith...
Lee Valley 3/4'' Dog Hole Bushings
These 3/4'' hardened steel bushings help you make an accurate dog-hole drilling guide using any 1 1/2'' thick board.
Knurling on the bushing provides a mechanical lock when installed in an appropriately sized hole (1'' for the 3/4'' bushing), and a projecting rim ensures that it rests perpendicular to the jig's surface.
Made in Canada.
Veritas Planing Stop
These low-profile work stops present a broad bearing surface. Particularly useful with thin or narrow workpieces, each 1 1/4" wide anodized aluminum rail projects just 0.22" above the bench top, allowing materials as thin as 1/4" to be worked or planed without obstruction. It also provides a reliable registration surface for materials too narrow to span two adjacent bench dogs.
The...
Veritas Bench Dogs & Pups
These are made from solid brass rod. Sold in pairs.
The crosshatching and 2° slope on the face help to hold wood securely, pulling it down onto the bench's surface. A side spring slides cleanly and holds it in position.
The dogs are 110mm (4.3/8") long, the pups 60mm (2.3/8").
Both work well in combination with Veritas Wonder Dog and Wonder Pup Clamps. For 19mm (3/4")...
Veritas Wonder Dogs & Pups
Steel post and screw with black oxide finish, solid brass clamp head and handle.
These can pivot in any direction that clamping is required. An easy-adjusting handle provides ample clamping pressure in any position. The dog head has two screw holes, so any tip shape can be cut with a scroll saw and attached for specialized work.
The Wonder Dog post is 6½" and is drilled and tapped...
Simon James 19mm (3/4") Holdfast
Handmade, using traditional methods and a small forge by experienced craftsmen as a cottage industry. They are not mass produced so every one has very slight differences, which is what you expect with handmade workmanship. They are all hand stamped with the Simon James logo.
Made from 18mm steel and are designed to fit 19mm (3/4") holes.
Overall shaft length is 12" (30cm)
Overall length of reach...
Lie-Nielsen Holdfast
Inspired by the work of master blacksmith, Peter Ross. Cast Ductile Iron, hot oil finish. Fits a 3/4" diameter hole in a benchtop up to 4" thick (if your benchtop is thicker, you may need to relieve the bottom third of the hole to 1" diameter). Low profile, flexible enough to grip the work firmly, but easily loosened with a hammer.
Overall shaft length is 13" (33.0 cm)
Overall...
Veritas Bench Hold Down
The Veritas hold-down can clamp workpieces to a bench or anywhere a 3/4" hole can be drilled.
Exceptionally high clamping forces can be obtained with this hold-down for two reasons. First, with the arm free to pivot independently, all levered forces are exerted downward, without any losses due to horizontal slippage from the canting action of the hold-down post. Second, the fine barb-shaped grooves...
Veritas Quick-Release Wonder Dog
This version of the Wonder Dog has a fast-acting cam mechanism to speed up adjustments. You just slide the head against the workpiece, then throw the lever to apply clamping force. Curved and irregular shapes can also be clamped; two screw holes in the brass dog head let you attach a custom face of any shape, giving good control without marring work.
The low-profile head and clamp body are 5/8"...
Lee Valley Vice Rack Stop
This simple device from Lee Valley is designed to help prevent racking when clamping work at one side of a vice. Simply stack up as many of the 0.10" thick shims as you need to match the approximate thickness of your work, up to a total of 4", and insert it into the vice opposite the work being clamped.
For thicker work, you can add a piece of scrap wood to occupy the bulk of the space, and then...
Veritas 3/4'' Surface Clamp
Hold down, bench clamp or surface clamp - the functions are the same just the name changes. True to form Veritas have taken an ordinary thing and made it much, much better - as well as a thing of beauty in brass and black satin.
These fast acting surface clamps can be used anywhere you can drill a 19mm diameter hole. The post has a wedging mechanism which anchors it firmly (horizontally or vertically)...
Benchcrafted Benchmakers Hardware
Typical captive nut arrangements for knockdown bases involve either a square nut, recessed hex nut, or short, slotted cross-dowels. All of these fasteners make it tricky to assemble the joint without some frustration or extra tools.
The BenchCrafted barrel nuts and end cap barrel nuts are the ideal choise for making knock-down joints in workbench bases.
The set of 4 zinc-plated steel Barrel Nuts are...
Benchcrafted Crubber
Crubber is a composite material made by grinding natural cork and rubber, then combining the materials under great pressure to form a tough, resilient, grippy matrix that is then sliced into sheets. Crubber has become BenchCrafted's favourite non-slip, super-grip material for lining vice jaws. All Benchcrafted vices are outfitted with Crubber.
What's the advantage over suede or other cow skin-type...
Benchcrafted Planing Stop
The Benchcrafted planing stop is made from mild steel. The teeth are milled into the stop then lightly deburr with abrasive paper to maintain the points of the teeth. The stop arrives sharp and ready to use.
Easy Installation
Using the same principle as their Barrel Nuts, the Benchcrafted Planing Stop mounts to the wooden stock via two machine screws and a single, double-tapped barrel nut. This provides...
Veritas Carvers Screw
Turned from a solid bar of brass, this carver's screw, with its tapered tip and high-profile threads, grips securely and guarantees that remounted pieces are held as securely the third and fourth time as they were the first.
The hex portion clamps securely in a vice while you thread on a blank, or you can use a spanner. The moulded tightening knob has a low-friction brass insert. At 5" long overall,...
Muzzles for Veritas Bench Dogs & Pups
For clamping a finished piece without marking it, the slip-resistant muzzles slide over the Bench Dogs (or Bench Pups) to give you a non-marring surface. They have a hard, spring-grip, plastic body with six face ribs.
Available in two sizes: 1¼" long for Bench Dogs or 3/4" long for Bench Pups. Sold in pairs.
Veritas Special Bench Bolts
Most European benches use a bolt system to fasten leg sets to stretchers. The main advantage is that you can snug the bolts if anything loosens due to changes in humidity.
The solid brass nuts on our bench bolts slide into a pre-drilled hole in the stretcher, and distribute pressure to prevent breakout. A bench can be made very rigid (without complex joinery) by using a wide stretcher, since the...
Veritas Wood Carver's Vice
A good carver's vice should be adjustable in all three axis. This one has full rotation in two axes and 3" of height adjustment in the third axis. But more important, it has controlled release; when you relieve the clamping pressure, a combination of internal springs and O-rings provides residual resistance so that your work does not suddenly fall or rotate. You can reposition the work and...