Sort By
Per Page
View
Grid
List
Accessories for the Veritas Wood Carver's Vice
Accessories for the Veritas Wood Carver's Vice:
Dog Hole Mount Assembly:
The vice can be side or top mounted through any standard 3/4" dia. dog hole using the auxiliary rod/sleeve/wing-nut assembly, usable on benches from 5/8" to 4" thick.
3 1/2" Mounting Plate:
3-1/2" dia. by 1/2" thick mounting plate with a steel rod.
2" Mounting Plate:
For mounting smaller pieces, such as duck heads or bird...
5 1/2'' Post for Veritas Bench Hold Down
This 5 1/2" Post is for the Veritas Bench Hold Down, for holes where through travel is limited.
At just 5-1/2" long, it provides about 4" of clamping capacity.
Patented.
Veritas Tail Vice Screw
The tail vice screw is essentially the same construction as a shoulder vice screw but without an end guide, this tail vice screw has a clamping capacity of 17" less thickness of wooden jaws (not included) and is 21" overall.
1.1/8" diameter screw with single-lead Acme threads.
Mounting screws included.
Wooden Handle not included, but can be purchased as an optional extra.
Made...
Benchcrafted Classic Leg Vice Base Hardware
In the 19th and early 20th century, many vocational schools and commercial shops in France and its colonies were outfitted with Roubo-style benches and metal leg vice hardware. French hardware is typically made entirely of metal, whereas hardware from Britain and America usually features a T-shaped iron casting fitted with a sliding wooden handle. Benchcrafted designed theirs around the French model...
Benchcrafted HiVise + Mounting Screw
Taking cues from early French prototypes (commonly referred to as an "etau(x)" which is simply the French word for vice) Benchcrafted have gone a few steps further and made improvements and refinements over the historical versions. The body of the vice is designed to be much stronger, yet more compact with its inset arms and single clamping screw for attaching the vise to a workbench or table. The...
Benchcrafted HiVise Mounting Screw
The mounting screw is designed for the HiVise to make it ultimately more portable. The HiVise can be made with either a tail vice cleat or a benchtop batten, but having a mounting screw will allow you to use it in multiple positions around your bench, or anywhere outside the workshop where you are allowed to make a mess!
Anticipating the varied needs of woodworkers Benchcrafted designed the HiVise...
Benchcrafted Glide Leg Vice Base Hardware - Cast
The Glide makes holding your work quick, easy, and pleasurable. It uses a clever combination of components to deliver incredible clamping force with minimal effort.
Traditional leg vices use a sliding "tommy bar" to operate the vice. This style of handle offers one distinct advantage: lots of leverage. These guys have engineered the Glide to deliver rock-solid workholding without the need...
Benchcrafted Glide Leg Vice Base Hardware - Machined
The Glide makes holding your work quick, easy, and pleasurable. It uses a clever combination of components to deliver incredible clamping force with minimal effort.
Traditional leg vices use a sliding "tommy bar" to operate the vice. This style of handle offers one distinct advantage: lots of leverage. These guys have engineered the Glide to deliver rock-solid workholding without the need...
Benchcrafted Crisscross Retro
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
Benchcrafted Crisscross Solo
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
Benchcrafted Crisscross 14
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
Benchcrafted Classic Tail Vice (Wagon Vice) Kit
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz.
The Benchcrafted Tail Vice uses a pair of either wooden or metal...
Benchcrafted Tail Vice (Wagon Vice) Kit - Cast
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz.
The Benchcrafted Tail Vice uses a pair of either wooden or metal...
Benchcrafted Tail Vice (Wagon Vice) Kit - Machined
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz.
The Benchcrafted tail vice uses a pair of either wooden or metal...
Benchcrafted Moxon Vice
The Benchcrafted Moxon Vice clamps to any bench, raising your workpiece to a convenient height and holding it rock-solid. If you cut dovetails and other joints by hand, this is a vise that will completely change your experience in the shop. Fast and effortless, the Moxon vice makes joinery a pleasure.
The Moxon vice is fitted with cast iron hand wheels for rapid, easy adjustment. Instead of the handwheel...
Edge Toolworks Moxon Vice
A beautifully made, ready to go straight from the box (no assembly required) Moxon Vice. Made by Matthew Collins Furniture under their brand of 'Edge Toolworks'. Matt runs a successful workshop in Standlake, Oxfordshire which he set up in 1990, and has been a customer of Classic Hand Tools for as long as we can remember! Matt's team use these vices in their workshop and have done so...
Benchcrafted HiVise
Taking cues from early French prototypes (commonly referred to as an "etau(x)" which is simply the French word for vice) Benchcrafted have gone a few steps further and made improvements and refinements over the historical versions. The body of the vice is designed to be much stronger, yet more compact with its inset arms and single clamping screw for attaching the vise to a workbench or table. The...
Veritas Front Vice - Large
This vise has rugged, machined, double guide rods and a single-lead Acme screw.
The large front vise is 10-1/2" × 21" overall with a 1-1/8" dia. screw, and 13" clamping capacity (less the thickness of your wooden jaws). The larger vise has an offset center screw to allow vertical clamping without skewing.
Can be added to an existing bench or built into a new one.
Mounting screws included.
Made...
Veritas Front Vice - Regular
This vise has rugged, machined, double guide rods and a single-lead Acme screw.
The regular front vise is 7" × 14¾" overall with a 7/8" dia. screw and clamping capacity of 8¼" (less the thickness of your wooden jaws).
Can be added to an existing bench or built into a new one.
Mounting screws included.
Made in Canada. Patented.
Veritas Quick-Release Front Vice
Using the same quick-release mechanism as our tail vise, our front vise has a simple on-off cam lever to engage or disengage the Acme-threaded screw, allowing it to apply up to 400lb of force in either clamping or spreading applications.
The screw mechanism provides 12¼" of overall travel (less the thickness of your wooden jaw and bench apron). Tight body tolerances result in minimal jaw sag,...
Veritas Quick-Release Sliding Tail Vice
Installing a tail vise is notoriously difficult, usually requiring a section of workbench to be cut away and rebuilt around a complicated vise mechanism. Not so with this one. It can be quickly incorporated into a new bench construction or easily retrofitted to an existing bench without major surgery.
The end plates are symmetrical, so you can install the T-handle and quick-release lever in a...
Veritas Shoulder-Vice Screw
This vice screw is for the L-shaped shoulder vise used on Scandinavian-style benches. 1-1/8" dia. screw with single-lead Acme threads.
The threaded guide is mortised into the vise shoulder, while the end guide attaches to the vise jaw. 7-1/4" clamping capacity (less wooden shoulder thickness), 13" overall. Mounting screws included.
Made in Canada. Patented.
Veritas Tail Vice
This vise can be used for both types of tail vise - with or without a shoulder. It has guide plates 2" wide by 15" long. The maximum opening is 8" (less the thickness of your wooden jaws).
The single-lead Acme screw is 7/8" in diameter.
Made in Canada. Patented.
Veritas Twin-Screw Vice
The Veritas Twin Screw Vice is the only non-racking full-width end vise on the market. You can clamp anything anywhere in the vise and the jaws stay parallel. The chain drive ensures parallelism and eliminates the racking common in other vises. It can be operated using either handle.
Even better, a spring-loaded lock pin lets you disengage the chain for controlled jaw skewing needed to equalize...
Benchcrafted Swing Seat - Hardware Only (no wood)
The Benchcrafted Swing Away Seat is the solution for seated work at the bench. Chopping waste between dovetails, making decorative inlay and other close work is best done from a steady, seated position. The work is brought closer to your eyes and chest, which helps you to work more precisely and comfortably. It's also a great spot to take a break, check email, or have lunch.
Stand-alone stools can...
Bessey EZ360 One-handed Clamp with Rotating Handle
All-round flexible use
The EZ360 one-handed clamp is extremely versatile:
Thanks to innovative 360° turning mechanism to perfectly adjust the handle position to the clamping task
Thanks to long protective caps to protect the workpiece surface and distribute the clamping force of up to 1,400 N
Change the upper part from clamping to spreading thanks to the push-button release mechanism
Extremely...
Bessey KR Body Clamp
For parallel jaw clamping.
* now with 40% more clamping force (7000 N)
* depth increased from 85mm to 95mm
* supplied with 3 supporting pressure caps for extra protection
* with quality 2-component handle
* attach KR-AS adaptors for extra reach
KR60-2K 600mm opening 95mm depth
KR80-2K 800mm opening 95mm depth
KR100-2K 1000mm opening 95mm depth
KR125-2K 1250mm opening 95mm depth
KR150-2K...
Bessey TW16-2K 3/4'' Bench Hold Down
The Bessey Hold Down Clamp with the 19mm adaptor to work on workbenches with 3/4" holes.
Clamping depth 100mm.
Max. clamping height 200mm.
High quality 2-component plastic handle with smooth-running trapezoidal threaded spindle.
Includes the 19mm (3/4") adaptor.
If you are looking for this to work with a workbench which has 1" holes (such as the Sjoberg Elite range)...
Bessey GK Gear Klamp
* High-quality two-component plastic handle positioned around the rail, so clamp can be used in tight spaces
* Clamping force up to 2,000 N
* Easy-to-move trapezoidal thread spindle with swivelling pressure plate
* Quick-release shift button to quickly adjust sliding bar
GK15 - 150mm opening x 60mm depth
GK30 - 300mm opening x 60mm depth
GK45 - 450mm opening x 60mm depth
GK60 - 600mm opening...
Bessey EZS One Handed Clamps
* Clamping force up to 2,000 N
* Toolless conversion for spreading thanks to intelligent release mechanism in upper section
* Ergonomically shaped 2-component plastic handle behind the rail
EZS15-8 150mm Opening 80mm Depth
EZS30-8 300mm Opening 80mm Depth
EZS45-8 450mm Opening 80mm Depth
EZS60-8 600mm Opening 80mm Depth
Bessey TG2K Screw Clamps
* Clamping force up to 6,000 N
* High-quality 2-component plastic handle
* Pressure plates can be replaced by hand - no tools required (from 80 mm throat depth)
* Stable profiled rail with serration is resistant to torsional forces
* BESSEY anti-slip system (from 80 mm throat depth)
TG-20 2K 200mm opening 100mm depth
TG-30 2K 300mm opening 140mm depth
TG-40 2K 400mm opening 175mm depth
Bessey Klik Clamps
* Clamping force up to 1,200 N
* Weight starts from a tiny 260 g
* Sturdy fixed and sliding arms made from lightweight magnesium
* Stepped‚ vibration-resistant
* VIBRAFIX ratchet mechanism
Bessey GH All Steel Lever Clamps
* Greater reserves of power‚ thanks to optimised rail profile‚ for even clamping force build-up‚ especially under maximum utilisation of the clamping range
* Non-slip trigger release
* Quick - up to 5 x faster than regular clamps
* Secure - vibration resistant
* Strong - clamping force up to 8‚500 N
GH20 Opening 200mm Depth 100mm
Bessey UK Uni Clamps
* Clamping force up to 1‚500 N
* Parallel jaw faces with extra-large contact surfaces
* Clamping of various shapes‚ along the whole length of the rail
* Universally applicable
* Light and easy-to-handle
* No need for tools for switching between clamping and spreading
* Retail-ready packaging
UK60 Opening 600mm
Bessey LMU Step-Over Clamp
* Clamping force up to 1‚500 N
* Step-over clamping
* Comes with two plastic pressure caps
* Small and easy to handle
* Light weight
LMU20-5 supplied in a pack of 4
Bessey Horizontal Toggle Clamp with Open Arm and Horizontal Base Plate
In the clamped position‚ the lever is horizontal.
Automatic and infinitely variable adjustment of the clamping height 0 - 65 mm (2 ½ In.) while clamping force remains unchanged - without having to make manual changes to the position of the pressure screws.
Clamping force is variable up to 2‚500 N (550 lbs) depending on the adjustment of the set screw in the cantilevered joint.
Sturdy‚...
Bessey KR-AS Tilting Clamp Adapter Set
A very handy set of adapters to allow clamping on sloping and parallel surfaces (15 degrees tilt range). To be used with the Bessey K Body clamps.
Bessey XV5-170 VarioClippix Spring Clamp
* Variable clamping width up to 170 mm‚ yet can be operated with one hand
* Lightweight‚ functional and easy to handle
* Extremely stable
* Retail-ready packaging
Lee Valley Cabinet Scraper Case
Scrapers can be awkward to store without damaging their cutting edges. Our scraper case solves the problem by keeping your scrapers isolated from each other in a padded sleeve. With nine pockets, arranged in groups of three, there is plenty of space for many different thicknesses and shapes.
The heavy polyester roll is double-layered and padded. Each section is fitted with a hook-and-loop strip...
Lie-Nielsen 12 Tool Chisel Roll
12 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Ray Iles 8" Drawknife Sheath
Hand made by Ray Iles in-house cobbler in brown leather. Keep you and your drawknife safe and protected from the elements and any potential accidents.
The large sheath (8") fits the Mike Abbott Pattern Drawknife
Sack Ups Plane Sack - Block Plane SU544
Protect your valuable planes with these impregnated sacks made by Sack Ups which inhibit rust corrosion. More effective than any smelly old sock.
Sack-Ups are Silicon treated to prevent rust and to wick moisture away from your valuable tools. They provide protection for your tools and prevent dings and scratches. Keeping your tools looking as new as they did the day that you bought them.
Available...
Sack Ups Plane Sack - Smoothing Plane SU545
Protect your valuable planes with these impregnated sacks made by Sack Ups which inhibit rust corrosion. More effective than any smelly old sock.
Sack-Ups are Silicon treated to prevent rust and to wick moisture away from your valuable tools. They provide protection for your tools and prevent dings and scratches. Keeping your tools looking as new as they did the day that you bought them.
Available...
Sack Ups Plane Sack - Jack Plane SU546
Protect your valuable planes with these impregnated sacks made by Sack Ups which inhibit rust corrosion. More effective than any smelly old sock.
Sack-Ups are Silicon treated to prevent rust and to wick moisture away from your valuable tools. They provide protection for your tools and prevent dings and scratches. Keeping your tools looking as new as they did the day that you bought them.
Available...
Sack Ups Plane Sack - Jointer Plane SU547
Protect your valuable planes with these impregnated sacks made by Sack Ups which inhibit rust corrosion. More effective than any smelly old sock.
Sack-Ups are Silicon treated to prevent rust and to wick moisture away from your valuable tools. They provide protection for your tools and prevent dings and scratches. Keeping your tools looking as new as they did the day that you bought them.
Available...
Connells Leather Tool Holdall
The Connell Tool Holall is ideal for storing a variety of tools. Made from soft moss backed leather for durability.
Guaranteed against faulty workmanship and materials.
Dimensions - 18'' x 7'' x 7''.
Connells 12 Pocket Leather Tool Roll
The Connell Leather Chisel Roll has 12 pockets, with top and tail design for better protection.
Will accept chisels up to 275mm (11') long.
Rolls up neatly for easier storage.
Made from soft moss backed leather for durability
Pockets reinforced with brass rivets. Ties for secure fastening.
Connells 8 Pocket Leather Tool Roll
The Connell Leather Chisel Roll has 8 pockets with top and tail design for better protection.
Will accept chisels up to 275mm (11') long.
Rolls up neatly for easier storage.
Made from soft moss backed leather for durability
Pockets reinforced with brass rivets. Ties for secure fastening.