Gifkins A10 Dovetail Jig [Preowned, As New]
Unused. A commission sale.
The A10 Gifkins Box Maker's Dovetail Jig.
The Gifkins Dovetail Jig is ideal for boxes, drawers and other small pieces requiring clean, accurate, through-cut dovetail joints. After the initial setup, there is no need to make a trial joint every time you use the jig. Once adjusted, the Gifkins Box Makers Dovetail Jig always gives you exactly the same fit, no matter...
Gifkins F5 Finger Jig [Preowned, As New]
Pre-owned - unused. A commission sale.
The F5 template cuts a joint with delicate 5 mm fingers, and is fully adjustable, maintaining the quality and accuracy that is synonymous with products from Gifkins product range.
The template uses a specially designed solid carbide cutter and will handle any thickness up to a maximum of 13 mm. As with dovetailing, the finger joints are cut on a table mounted...
6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New]
Six, unused Jorgensen hand screws. As new. A commission sale.
From the manufacturer's website...
"Seasoned, straight-grain hard maple wood jaws marry with cold drawn steel-spindles and nuts with special double-lead threads. Together they create a handscrew clamp that holds tightly over broad areas, providing greater reach and a wider distribution of pressure than other clamps. The angle...
Philip Marcou - Smoothing Plane [Preowned]
PHILIP MARCOU S2 2008 HEAVY SMOOTHING PLANE
It is not easy to find out a great deal about this plane by the highly respected planemaker Philip Marcou.
Philip made this plane in 2008.
Reviews of his work are not plentiful but it is obvious that his planes were very well received when he first started making in 2006.
Philip Marcou is based in New Zealand so that may go some way to explaining...
5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned]
These 10 planes are all in G++ condition. We haven’t cleaned them up, but they will clean up beautifully.
The wedges are all fine and the blades are working well.
The planes are all stamped with the same owner’s stamp "C GIBSON"
They came out of a joiner’s chest with some other tools featured in this week’s Fridays Finds.
Pairs of No. 2, 4, 10, 12 &...
Vintage Beech & Brass Brace – Lovely Patina [Preowned]
There is no makers mark for this beech hand brass with brass escutcheons.
The brass button that releases your bit from the brace is stiff (but you would be after 100 years or so) but it is working and will free up.
This brace has a lovely patina. The head rotates freely as it should . The head may be rosewood but years of grubby carpenters hands have deposited blood sweat and tears all over the...
Sorby Lock Mortise Chisel [Preowned]
A handsome lock mortise chisel.
18” overall including a stubby 3'' oak handle.
1/2'' wide.
Owners stamp - "C GIBSON"
This beast will clean up very well.
Vintage Beech Box Chamfer Plane [Preowned]
2 3/8” wide , 6 ½” long overall with 1 5/8” wide blade.
G++ condition.
This would clean up beautifully and still work well.
There is an old 2” long crack in the sole of the plane but we think it will still work as intended.
A nice example.
Owners stamp - "C GIBSON"
Woodpeckers Woodworking Rule 300mm [Preowned, As New]
Pre-owned but unused.
Reads from the centre on one edge and left to right on the other edge.
Each edge is bevelled.
Very crisp white markings 1mm increments.
This rule has a very high level of accuracy. These rules are precision made from aircraft grade aluminium and anodized for surface protection and appearance. Woodpeckers say they are straighter, heavier and are easier to handle than any others...
Lie-Nielsen No.5 1/2 - Jack Plane [Preowned, As New]
An unused, as new plane with Lie-Nielsen branded plane sock.
Pre-owned but we don’t think the owner did much more that take it out of the box and stick in the plane sock. It is in great condition.
This is what we say about the plane in our Lie-Nielsen section…
"A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers...
Boxed Set of 5 Narex Bevel Edge Chisels [Preowned]
Pre-owned but sparsely used, they have been sharpened.
Good to go to work.
These are The Narex Richter chisels, a very well made and designed all-round bench chisel.
The base of the box has some scratch marks but is in otherwise G++ condition. The chisels are also in G++ - F condition.
6mm, 9mm, 12mm, 19mm & 25mm wide.
Ash hardwood handles have solid stainless steel ferrules and...
Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New]
Pre-owned, unused, as new. No box but Lie-Nielsen branded plane sack.
Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter.
Comes with a 45° frog as standard. Other frogs are available separately.
10-3/8" (264mm) long.
2-3/8" (60mm) blade. A2 steel.
Iron body...
Sterling Toolworks - Plane Adjusting Hammer [Preowned]
This is a commission sale.
Pre-owned but hardly used in G++ condition.
Note - this hammer comes with a spare "spud" in a Sterling Toolworks branded bag.
This is what we say about the hammer on our website, where it sells new for £175:
"The Sterling Tool Works Plane Adjustment Hammer is designed to be used to adjust plane blades and wooden plane wedges for wooden hand...
Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New]
Made by Pfeil - Switzerland
Unused - fine condition - a commission sale.
These Pfeil Punches for wood are for creating background detail for your carvings. They are made from steel and weigh 540g each.
They are housed in a wooden base.
Size - 10mm x 10mm x 135mm each.
These are the same set of puches as Classic Hand Tools sell in their Pfeil carving tools section for £170 (and...
Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New]
Made by Pfeil - Switzerland
These tools are very popular based on our experience in selling Pfeil carving tools for the last 15 years (but clearly not by our customer though, as he has never used them!).
Precisely ground and polished.
Pear handles, 70mm blade length, 125mm overall length.
The set which is housed in a wooden stand includes:
1 straight chisel 8mm (L1-8);
1 skew...
Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New]
This is a great value buy.
These Henry Taylor incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge.
The blades are about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
This set comprises the following gouges (if bought new from our site they would cost you £214)
F11...
5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned]
These are pre-owned - little used chisels with cosmetic staining to the steel blades. We have quickly cleaned them up and we think they will be absolutely fine for many years to come presenting a very affordable opportunity to get a good spread of bench chisels.
3/8", 1/2", 5/8", 1", 1 1/4" wide
Boxwood round handles with brass ferrules (the largest one is split but it isn't working free and could...
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Still in their original wrapping, this set comprises of 12 bevel edge chisels from the brand IYOROI in linen roll.
223mm in overall length.
Red oak handles.
Black finish to the blades with polished hollows. Black finish to striking hoops.
Hollow ground backs with single flutes for all widths.
Widths are as follows:
1.5, 3, 6, 9, 12,15,18, 21, 24, 30, 36 & 42mm.
Denim tool...
Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New]
Unused, as new.
White paper tool steel and high carbon steel laminated blade with red oak handle and steel striking hoop.
240mm overall. 60mm blade.
White paper steel (Shirogami in Japanese) is a carbon tool steel that is ideally suited to the production of chisels. It exhibits superior durability when compared to alloyed blue paper steels.
Widely available in the UK for about £70...
Clifton No.3 - Smoothing Plane [Preowned]
Pre-owned, a commission sale.
This plane has seen little use and is in G++ condition with original box and packaging.
This is the smallest smoothing plane Clifton make; ideal for those with smaller hands, or those with smaller jobs that don't require so much heft.
Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment...
Veritas - Small Shoulder Plane [Preowned]
Pre-owned, a commission sale.
This is what we and Lee Valley Tools say about the small shoulder plane...
"Designed to seat nicely in the hand, the smallest Veritas shoulder plane is easily controlled using a one-handed grip.
The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest...
Veritas No.112 - Large Scraping Plane [Preowned]
Pre-owned, a commission sale. Original packaging, instruction leaflet and Veritas plane sack.
This plane hasn't seen much work at all. G++
This is what we and Lee Valley Tools say about this large scraping plane..
"The Veritas® scraping plane is the ideal tool for final smoothing, especially when you have to deal with highly figured wood or reversing grain. With a well-sharpened...
Lie-Nielsen No.073 - Large Shoulder Plane [Preowned]
Pre-owned in excellent condition with a branded plane sack.
This description is from our main Lie-Nielsen section where this plane (without plane sack is normally available for £376 - but we are currently out of stock!)
''A versatile, general purpose shoulder plane with nice heft and the best size to start with. This all-metal shoulder plane is based on the Record 073, which in...
Lie-Nielsen No.6 - Fore Plane [Preowned, As New]
Pre-owned in fabulous condition, as new.
The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a levelled surface ready for the smoothing plane.
18" (457mm) long
2 3/8" (60mm) blade. A2...
Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned]
This is a commission sale.
Used but in G++ condition
3/8” straight blade.
Reversible curved/straight detachable fence.
Instruction leaflet.
This is our description from our LN section…
“A router plane is a great tool for working shallow mortices - hinge gains, inlay, door locks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley...
Lie-Nielsen No.042 - Medium Shoulder Plane [Preowned]
Pre-owned, this is a commission sale.
G++, little used condition
Just a few surface scratches to the body. Full blade.
Instruction leaflet included.
This description of the plane is from the Lie-Nielsen planes section of our web site where this plane is available new for £329.
''An improved version of the now discontinued Record 042. This plane is 3/4'' wide and...
Lie-Nielsen - Boggs Spokeshave (Curved) [Preowned]
Pre-owned, used. G++ condition. A commission sale.
Note: the curve on this spokeshave is extremely shallow.
The Boggs Spokeshave is hefty and solid, weighing 12oz.
Designed for fine, precise shaping in all woods.
Body is 10" long with a 1" wide very slightly curved sole.
The sole of this spokeshave has a gentle (almost imperceptible) 5 degree radius for working inside curves.
2"...
Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned]
Pre-owned – a commission sale
4, 5, 6, 7 ,8 & 10mm blades come with this plane which has been lightly used.
Original packaging (the box is a bit tatty) and Instruction booklet.
The condition of the plane and blades is Good ++ (G++) which indicates it is not new, but has been well cared for and has no defects over and above superficial cosmetic blemishes.
“Closest in size...
5 Tasai Bench Chisels [Preowned]
These are pre-owned bevel edged bench chisels from the forge of master blacksmith Akio Tasai in Japan. A commission sale.
They have been used very sparingly; the hoops have been struck and there are burrs to be attended to in order to safeguard your fingers but that is a quick and easy job. The chisels and box are in G++ condition.
Laminated steel with single hollows. The cutting edge is blue...
Flexcut Left-Handed Carving Jack [Clearance]
FLEXCUT CARVIN JACK - older version, new. LEFT HANDED
For you whittlers out there!
This is the older version of the Carvin Jack launched successfully by USA manufacturer Flexcut some 20 years ago to great acclaim.
This a new unused version of the Carvin Jack in original packaging (the new version is labelled 2.0)
Blades firmly lock in both open and closed positions
Supplied with SlipStrop...
Lie-Nielsen SD-3 - Saw Nut Screwdriver [Preowned]
Tenon saw nut and thicknessing gauge screwdriver.
Pre-owned, in great condition with a few dings to the handle.
Curly Maple Handle (newer versions have cherry handles)
Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping.
Hardened 416 Stainless Steel blades, numbered...
Lie-Nielsen SD-9 - Honing Guide Screwdriver [Preowned]
Pre-owned, in great condition with a few dings to the handle.
This screwdriver is made to fit the captive screws in the removable jaws for our Honing Guide. It may be useful for other jobs as well.
5.40'' Overall Length
.285'' Blade Diameter
.045'' Tip Thickness
Curly Maple Handle (newer versions have cherry handles).
Modeled after gunsmith’s screwdrivers...
5 French Walnut Handles (with Tapered Brass Ferrules) [Clearance]
Attractive French Walnut handles for chisels, rasps etc
5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist.
The handles are pre-drilled with a 4mm diameter hole about 12mm deep.
Clear lacquer finish.
New old stock.
Lie-Nielsen - Spare Blade for a LN 97 1/2 Small Chisel Plane [Preowned, Unused]
As new, pre-owned.
Replacement blade for the Lie-Nielsen No. 97½ Small Chisel Plane. Comes with a 25° flat ground bevel.
1¾" wide x 3/16" thick
A2 cryogenically treated Tool Steel
Woodpeckers - Rule Stop 2 [Preowned, As New]
Pre-owned but unused, so as new.
Simply take any ruler (or look at our Woodpeckers Friday Finds or Woodpeckers Section) and add this well engineered stop to help you repeat your accurate marking out.
Selling in our Woodpecker Section for £52
File Sets
The RH Preyda File Sets, made from prized Arkansas Novaculite, are essential for deburring, chamfering, and creating smooth finishes. These files are highly valued by craftsmen such as gunsmiths, dentists, machinists, and jewelers.
File shapes: Round, Square, Triangular, and Knife Blade
Size: 4" x 3/8" (101.6mm x 9.5mm)
Grit options: Soft (400-600), Surgical Black (4000-6000), Translucent...
Square Double Angle File Translucent
The Square Double Angle Files offered by Classic Hand Tools are high-quality sharpening tools made from Arkansas Novaculite, a natural material prized for its ability to both sharpen and polish blades effectively. These files are designed to accommodate the various shapes and gauges of V-tools, making them ideal for detailed sharpening, finishing, and maintaining the edges of your tools.
Key Features:
Material:...