Active Sales

With stained beech handles, this Stay-Set (SS) version of the No.5 jack plane is in excellent condition. Stay set refers to the 2-piece cap iron which makes the sharpening of the iron somewhat quicker as you do not have to disassemble the plane iron assembly. Dating from 1950 – 1965 2” wide blade. 1 ½” original iron remains. This may have been refurbished...

Refurbished to a high standard. E C ATKINS 13tpi X- CROSS CUT TENON SAW – DEEP BRASS BACK 14” BLADE – attractive closed handle with ATKINS medallion FROST DOVE STREET NORWICH – SPECIAL – 18tpi DOVETAIL SAW 9” BLADE, CLOSED BEECH HANDLE 12” SPEAR & JACKSON 13tpi X – CUT “Leapfrog” tenon saw All straight bladed. A lovely collection. A...

E C Emmerich Smoothing Plane - 48mm wide blade – Pre-owned We think this has not been used as it presents as new. Lacquered beech body with steamed beech sole. Wooden wedge. ULMIA Wooden Dovetail Plane – early version This is an early version of the Ulmia Dovetail plane with the vertical nicker iron (stamped ULMIA) ) and with a lignum sole and brass fence to the 30mm skew...

This is perfectly functional chisel which has been refurbished nicely to include a replacement boxwood London Pattern Octagonal handle. 1” wide, bevel edged, the tang is cranked so to allow for knuckle clearance whilst paring. 13 1/2” overall. (Note - it is difficult to find a new equivalence to give you a price guide, however a shorter bevel edge cranked 1” wide chisel from...

5 FULUSE bevel edge & 2 FULUSE firmer chisels, all with makers stamp or label on the handle. 3/16”, 3/8”, 5/8”, 1” & 1 3/8” FULUSE bevel edge chisels. 2 FULUSE registered firmer chisels – ¼” & 11/16” Made from superior forged high carbon steel by Sheffield maker Cooper & Sons who were in existence from 1930’s and...

This is a commission sale of a rare A17 Norris coffin shaped smoother. Gunmetal sides with sweated steel sole and steel pins. Attractive rosewood infill which needs a very light cleaned to get rid of a few grimy marks, paint splatter etc. The rosewood will respond delightfully and hopefully the photographs already do justice to the rich rosewood colour. No major scratches or blemishes to...

This plane is in very good condition G++ This is what we write about this plane in our main Veritas Tools section ''Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts...

Fine condition used only once. Comes with the 3/8" Square Drive Adapter and 1/2" Square Socket. Original box and instructions. Obtaining dowels to perfectly match a project or specific species of timber, is to say the least, almost impossible. Not so if you own a Veritas Dowel cutter and have a few timber off-cuts to hand. These cutters can be used two ways. Either use them like a hand-held...

This is in G++ condition. Carpenter’s Adze Head - Brades & Co No.385

Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

This plane is a little bit rare these days!

10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...

New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...

New - just having a good old clean out and this is a bit of a bargain for woodturners This Robery Sorby system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And...

These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be stuck with a mallet when working on large sculptures. but of course, they can be used by hand to shape work without whacking with a mallet as required. The old Flexcut code is MC 302 which...

Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...