Sort By
Per Page
View
Grid
List
Nakaya Classic Series - Japanese Saw Set (4 saws)
Set of 4 Classic Japanese Saws in linen roll: Ryoba 240mm, Kataba 220mm, Kataba 300mm and the Dozuki 240mm
Ryoba 240mm
Double-edged cross-cut and rip-cut, perfect for mortise work.
Ultra-thin blade: 0.5mm thick.
Tooth spacing / teeth per inch cross-cut: 1.66mm or 15.3 TPI (teeth per inch).
Tooth spacing / teeth per inch rip-cut: graduated from 2.62mm (9.6TPI) to...
Nakaya Kataba Gold Saw
The Nakaya Kataba Gold is a well-balanced, relatively fine cross-cut saw. Kataba refers to the blade not having a spine, so is therefore able to perform deeper cuts when required. The blade will still track straight in the cut as the blade will be under tension when pulled.
Replaceable blade made from high-quality Japanese steel.
Cross-cut teeth.
Blade thickness: 0.4mm thick.
Tooth...
Replacement Blade for Nakaya Kataba Universal Meiko Gold Saw
Replacement blade for the Kataba Meiko Gold Saw.
Kataba Meiko Gold 250 - 250mm blade - 0.5mm thick WKG250M - This is a very clever saw combining x-cut and rip teeth on one edge of a 0.5mm thick blade.
Nakaya Golden Series - 4 Saw Set
Set of 4 Golden Series Japanese Saws in a traditional heavy linen roll; Ryoba Gold 240, Kataba Gold 240, Dozuki 210 & 240.
Ryoba Gold 240mm
240mm long, 0.5mm thick blade.
Set (Kerf width) 0.75mm.
Tooth spacing / teeth per inch cross-cut: 1.6mm or 15.8TPI (teeth per inch).
Tooth spacing / teeth per inch rip-cut: graduated from 2.7mm (9.4TPI) to 3.9mm (6.5TPI).
Kataba Gold 240
240mm long,...
Nakaya Dozuki Classic Saw
The Nakaya Classic Dozuki is a precise, well-balanced saw designed for fine joinery work. Dozuki refers to the backed spine, making it an excellent choice for dovetails (even though it is a crosscut), tenons, and other detail-oriented cuts where accuracy matters.
Replaceable blade made from high-quality Japanese steel.
Cross-cut teeth, perfect for "shoulder" work.
Ultra-thin...
Nakaya Dozuki Gold Saw
The Nakaya Dozuki Gold saws are a precise, well-balanced saw designed for fine joinery work. Dozuki refers to the backed spine, making it an excellent choice for dovetails (even though it is a crosscut), tenons, and other detail-oriented cuts where accuracy matters.
A choice of 4 sizes
Dozuki Gold 150 - 150mm blade - 0.2mm thick blade, spacing 0.83mm (30TPI), setting 0.35mm.
Dozuki Gold...
Nakaya Dozuki 240mm Japanese Folding Saw
The Nakaya Universal Dozuki Folding Saws have a combination of cross-cut and rip-cut teeth, making them ideal for joinery work. Dozuki refers to the backed spine, which lends it self to cutting dovetail, tenons, and other detail-oriented cuts where accuracy matters.
240mm long, 0.3mm thick blade.
Total length when folded 315mm.
Tooth spacing / teeth per inch: 1.5mm or 16.9 TPI (teeth per...
Nakaya Japanese Folding Saw Set
Fujiyama Noko Japanese Folding Saw Set. A Ryoba, Dozuki and a Kataba in one set.
Comfortable rubber handle.
Length when folded 315mm
Teeth protecting and space saving.
Folding Saw Set comes with: Kataba and Ryoba blade with adapter, Dozuki blade with metal back.
Spare blades available and are listed with the individual saws.
Nakaya Kataba 250mm Japanese Folding Saw
The Nakaya Kataba Folding Saw is relatively fine cross-cut saw. Kataba refers to the blade not having a spine, so is therefore able to perform deeper cuts when required. The blade will still track straight in the cut as the blade will be under tension when pulled.
250mm long, 0.5mm thick blade.
Total length when folded 315mm.
Cross-cut teeth.
Tooth spacing / teeth per inch; 1.36mm or 18.7TPI
Comfortable...
Nakaya Ryoba 240mm Japanese Folding Saw
The Nakaya Ryoba Folding Saw is a great universal saw for your workshop. Ryoba refers to the saw being double edged, so one side with cross-cut teeth, the other rip-cut.
Double-edged cross-cut and rip-cut, perfect for mortise work.
240mm long, 0.5mm thick blade.
Total length when folded 315mm.
Tooth spacing / teeth per inch cross-cut: 1.66mm or 15.3 TPI (teeth per inch).
Tooth spacing...
Nakaya Golden Series - 2 Saw Set
The Nakaya Golden Series 2 Saw Set comprises of two saws that compliment one another perfectly.
Dozuki Gold 150 - 150mm blade - 0.2mm thick blade, spacing 0.83mm (30TPI), setting 0.35mm. An excellent choice for dovetails (even though it is a crosscut), tenons, and other detail-oriented cuts where accuracy matters.
Kataba Universal Meiko 250 - 250mm long and 0.5mm thick blade with a combination...
Nakaya Kataba Classic Saw
The Nakaya Classic Kataba is a well-balanced saw thast is available in two lengths; the 250mm has finer teeth which is designed for fine joinery work, and the more coarse 300mm version for general carpentry. Kataba refers to the blade not having a spine, so is therefore able to perform deeper cuts when required. The blade will still track straight in the cut as the blade will be under tension when...
Nakaya Kataba Meiko Universal Saw
The Nakaya Kataba Universal Meiko - probably our best selling saw. It has a combination of cross and rip-cut teeth which makes it a very versatile saw in the workshop. Kataba refers to the blade not having a spine, so is therefore able to perform deeper cuts when required. The blade will still track straight in the cut as the blade will be under tension when pulled.
Replaceable blade made...
Nakaya Ryoba 240mm Classic Saw
The Nakaya Classic Ryoba is a great universal saw for your workshop. Ryoba refers to the saw being double edged, so one side with cross-cut teeth, the other rip-cut.
Replaceable blade made from high-quality Japanese steel.
Double-edged cross-cut and rip-cut, perfect for mortise work.
Ultra-thin blade: 0.5mm thick.
Tooth spacing / teeth per inch cross-cut: 1.66mm or...
Nakaya Ryoba Gold Saw
The Nakaya Ryoba Gold is a great universal saw for your workshop. Ryoba refers to the saw being double edged, so one side with cross-cut teeth, the other rip-cut. A choice of 4 sizes........
Ryoba Gold 220mm.
220mm long, 0.4mm thick blade.
Set (Kerf width) 0.7mm.
Tooth spacing / teeth per inch cross-cut: 1.3mm or 19.5 TPI (teeth per inch).
Tooth spacing / teeth per inch rip-cut: graduated from...
Nakaya Universal Dozuki Saw
The Nakaya Classic Universal Dozuki saws have a combination of cross-cut and rip-cut teeth, making them ideal for joinery work. Dozuki refers to the backed spine, which lends it self to cutting dovetail, tenons, and other detail-oriented cuts where accuracy matters.
Replaceable blade made from high-quality Japanese steel.
Combination cross and rip-cut teeth.
Ultra-thin blade:...
Replacement Blade for Nakaya Dozuki Classic Saw
A replacement blade for the Dozuki Classic dovetail saw.
0.3mm thick blade with very fine back teeth. Especially suitable for cutting tenon shoulders and precise wood joints.
Replacement Blade for Nakaya Dozuki Gold Saw
Replacement blade for the Dozuki Gold Saw.
These blades are robust and with usual wear they should last a long time. More care must be taken with the thinnest blade such as the Dozuki 150 & 210 saws which are designed for very fine cuts.
A choice of 4 sizes
Dozuki Gold 150 - 150mm blade - 0.2mm thick, spacing 0.83mm, setting 0.35mm WDG150 - A very fine 150mm long blade.
Dozuki Gold...
Replacement Blade for Nakaya Dozuki 240mm Folding Saw
Replacement blade for the Fujiyama Dozuki 240mm Folding Saw.
Blade 0.3mm thick.
Spacing 1.5mm for cross cut and rip cut.
Replacement Blade for Nakaya Kataba 250mm Folding Saw
Blade 0.5mm thick
Spacing 1.36mm for cross cut
Replacement Blade for Nakaya Ryoba 240mm Folding Saw
Blade 0.5mm thick
Spacing Cross Cut 1.66mm
Spacing Rip Cut 2.62-4mm
Replacement Blade for Nakaya Kataba Classic Saw
Replacement blade for the Kataba Classic Saws.
250mm 0.5mm thick blade
300mm 0.6mm thick blade
Replacement Blade for Nakaya Kataba Gold Saw
Replacement blades for the Kataba Gold Gold Saw.
Kataba Gold 240 - 240mm blade - 0.4mm thick, spacing 1mm setting 0.45mm WKG240
Replacement Blade for Nakaya Ryoba 240mm Classic Saw
Replacement blade for the 240mm Ryoba Classic Saw.
0.5mm thick blade with trapezoid teeth for crosscuts andt triangular teeth for rip-cut.
Replacement Blade for Nakaya Ryoba Gold Saw
Replacement blades for Ryoba Gold Saw.
A double edged blade with X-cut & rip edges and traditional style handle.
A choice of 4 sizes
220mm blade - 0.4mm thick (spacing of teeth 1.3mm cross 2.0-3.4mm rip cut setting 0.7mm) WRG220
240mm blade - 0.5mm thick (spacing of teeth 1.6mm cross 2.7-3.9mm rip cut setting 0.75mm) WRG240 - This is our most popular size.
270mm blade - 0.6 mm thick...
Replacement Blade for Nakaya Universal Dozuki Saw
Replacement blade for the Universal Dozuki Saw.
This saw combines both rip and cross cut on one cutting edge
J-WDU245 spacing 1.5 mm (finer)
J-WDU248 spacing 1.8 mm (coarser)
Oire Nomi Suminagashi Japanese Chisel
The Oire Nomi Suminagashi Japanese Chisel is a premium tool for precision woodworking, crafted using traditional Japanese techniques. This chisel is perfect for detailed carving and joinery, offering superior sharpness and durability.
Length: 220mm (60mm blade)
Widths: 6mm, 9mm, 12mm, 18mm, 24mm, and 30mm
Blade: Made from Suminagashi steel, known for its layered construction and strength.
Design:...
Kamanomi Japanese Chisel
Used for cleaning the corners of joints.
Morinomi Japanese Chisel
Used for cleaning the bottom of mortices.
Sokosarai Japanese Chisel
Used for scraping and levelling the bottom of mortices.
Japanese Waterstones - Toishi-Ohishi
Toishi-Ohishi offer 7 single grit stones and 6 combination stones.
These stones are 8" (205mm) long, 3 inches (75mm) wide and a minimum of 1" (25mm) thick*.
The 3" (75mm) width makes them particularly useful when honing wide plane blades, knives or cut throat razors.
*Stone sizes:
220 grit - 205 x 80 x 35mm
All other single grit stones 205 x 75 x 25mm
Combination stones...
Japanese Waterstones - Toishi-Ohishi - 2 Stone Bundle
A very popular combination of Japanese waterstones. The 1000 grit is a singular grit stone which is ideal for honing the bevel before polishing on the 3000/8000 grit combi. Both stones are 25mm deep, by 75mm wide by 204mm long.
Nagura Stone
The Nagura correcting stone is used to condition waterstones during use. For natural waterstones their use is to wear away hard particles or contamination in the waterstone, and to selectively allow flattening by being rubbed on a high spots on the stone. Another usage is to create slurry. Use with Ohishi stones of more than 1000 grit.
Nagura Stone size: 75 x 25 x 25mm
Set of 7 Single Grit Toishi + Nagura Stone
This set includes 7 single grit stones and the Nagura correcting stone.
These stones are 3 inches (75mm) wide which is particularly useful when honing wide plane blades, knives or cut throat razors.
These stones cut quickly but are dense and hard enough not that most of the them do not require soaking prior to use (the exceptions are the 220 & 600 grits). A sprinkle of water is all you need...
Sandpaper for Stone Flattener
1 piece each of 60 and 80 grit paper for the flattening block. Abrasive is sticky backed to attach to the flattening block.
Shinwa Mini Ink Line + Black Ink
Professional quality, compact Sumitsubo.
Body 130 mm, line length 15 m.
Includes 200ml black ink.
New design (shiny new colours!)
Shinwa Ink Line (Sumitsubo) + Black Ink
With a sealed ink reservoir to prevent ink from leaking out or drying up. Automatic spring-loaded recoil with locking mechanism. Unbreakable plastic body and thread bob.
Includes 200ml black ink.
Body length 180 mm, thread length 20 m.
New design (shiny new colours!)
Shinwa Ink Line (Sumitsubo)
With a sealed ink reservoir to prevent ink from leaking out or drying up. Automatic spring-loaded recoil with locking mechanism. Unbreakable plastic body and thread bob.
No ink is included.
Body length 180 mm, thread length 20 m.
New design (shiny new colours!)
Shinwa Mini Ink Line
Professional quality, compact Sumitsubo.
Body 130 mm, line length 15 m.
No ink is included.
New design (shiny new colours!)
Shinwa 45° Mitre Square - Metric
Stainless steel mitre square.
Measurements on both sides
Angular accuracy 45° & 135°: 0.2 mm or less per 100 mm
Base length: 115mm
Shinwa 45° Mitre Square with 90° Guide - Metric
Stainless steel mitre square.
Measurements on both sides
Angular accuracy 45°, 90° & 135°: 0.2 mm or less per 100 mm
Base length: 115mm
Shinwa 90° Try Square - Metric
Stainless steel square.
Measurements on both sides
Angular accuracy 90°: 0.1 mm or less per 100 mm
Outside measurements: 150mm
Inside measurements: 120mm
Base length: 100mm
Shinwa Combination Square 45°, 90° & 135° - Metric
Shinwa Combination Metric Square made of stainless steel includes a mitre gauge and square.
Measurements on both sides
Angular accuracy 45° & 135°: 0.2 mm or less per 100 mm
Angular accuracy 90°: 0.1 mm or less per 100 mm
Base length: 163mm
Shinwa Sliding Bevel 200mm
Shinwa Sliding Bevels are ideal for marking out any angle. This one is 200mm (8") we also stock a 250mm (10") one.
Can be adjusted to any angle and is lightweight.
Fixing screw is on the end, therefore is never in the way.
Aluminium Handle
Stainless Steel Blade
Shinwa Sliding Bevel 250mm
Shinwa Sliding Bevels are ideal for marking out any angle. This one is 250mm (10") we also stock a 200mm (8") one.
Can be adjusted to any angle and is lightweight.
Fixing screw is on the end, therefore is never in the way.
Aluminium Handle
Stainless Steel Blade
Liquid Ink 200ml - Black
For Sumitsubo and Sumisashi, it is water soluble.
Liquid Ink 200ml - Red
For Sumitsubo and Sumisashi, it is water soluble.
