Henry Taylor Registered Mortice ChiselHenry Taylor Registered Mortice Chisel
Henry Taylor Registered Mortice Chisel
Made in Sheffield, England for over 150 years. Blade about 5½" long. F23 - 1/4" (6mm) F24a - 3/8" (9mm) F24 - 1/2" (12mm) F25 - 3/4" (19mm) F26 - 1" (25mm)
from £25.20 inc VAT
Henry Taylor Heavy Duty Socket Firmer ChiselsHenry Taylor Heavy Duty Socket Firmer Chisels
Henry Taylor Heavy Duty Socket Firmer Chisels
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers. The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased. Forged...
from £69.60 inc VAT

Henry Taylor Bevel Edge ChiselsHenry Taylor Bevel Edge Chisels
Henry Taylor Bevel Edge Chisels
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles and brass ferrules. Made in Sheffield, England for over 150 years. F55 - 1/4" (6mm) F56 - 3/8" (9mm) F57 - 1/2" (12mm) F59 - 3/4" (19mm) F60 - 1" (25mm)
from £24.00 inc VAT
Henry Taylor Short Cranked Bevel Edged ChiselsHenry Taylor Short Cranked Bevel Edged Chisels
Henry Taylor Short Cranked Bevel Edged Chisels
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
from £34.00 inc VAT

Henry Taylor Long Thin Bevel Edge Paring ChiselsHenry Taylor Long Thin Bevel Edge Paring Chisels
Henry Taylor Long Thin Bevel Edge Paring Chisels
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge. Blade about 8¾" long.
from £38.40 inc VAT
Henry Taylor Cranked Bevel Edge Paring ChiselsHenry Taylor Cranked Bevel Edge Paring Chisels
Henry Taylor Cranked Bevel Edge Paring Chisels
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times. Blade about 8¾" long.
from £55.20 inc VAT

Henry Taylor Firmer ChiselsHenry Taylor Firmer Chisels
from £24.60 inc VAT
Henry Taylor Incannel Firmer GougesHenry Taylor Incannel Firmer Gouges
Henry Taylor Incannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. Blade about 4" long. F11 - 1/4" (6mm) F12 - 3/8"...
from £29.10 inc VAT

Henry Taylor Outcannel Firmer GougesHenry Taylor Outcannel Firmer Gouges
Henry Taylor Outcannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. Blade about 4" long. F17 - 1/4" (6mm) F18 - 3/8" (9mm) F19...
from £27.60 inc VAT
Henry Taylor Swan Neck ChiselsHenry Taylor Swan Neck Chisels
Henry Taylor Swan Neck Chisels
A Henry Taylor swan neck chisel is used to clean the bottom of mortices. The chisel is levered in use, not struck. Available in 1/4", 5/16" and 3/8".
from £22.80 inc VAT

Henry Taylor Bevel Edge Chisels Set of 5Henry Taylor Bevel Edge Chisels Set of 5
Henry Taylor Bevel Edge Chisels Set of 5
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles with brass ferrules. Made in Sheffield, England for over 150 years. F55 - 1/4" (6mm) F56 - 3/8" (9mm) F57 - 1/2" (12mm) F59 - 3/4" (19mm) F60 - 1" (25mm) As recommended by Simon Frost in September 2021 issue of The Woodworker. Supplied with a...
£120.00 inc VAT
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers. The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased. Forged...
£312.00 inc VAT

Henry Taylor Registered Mortice Chisel Set of 5Henry Taylor Registered Mortice Chisel Set of 5
Henry Taylor Registered Mortice Chisel Set of 5
Made in Sheffield, England for over 150 years. Blade about 5½" long. F23 - 1/4" (6mm) F24a - 3/8" (9mm) F24 - 1/2" (12mm) F25 - 3/4" (19mm) F26 - 1" (25mm)
£138.00 inc VAT
Henry Taylor Cranked Bevel Edge Paring Chisels Set of 5Henry Taylor Cranked Bevel Edge Paring Chisels Set of 5
Henry Taylor Cranked Bevel Edge Paring Chisels Set of 5
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times. Blade about 8¾" long. Set includes 1/4", 1/2", 3/4", 1" and 1 1/4" chisels.
£317.00 inc VAT

Henry Taylor Incannel Firmer Gouges Set of 6Henry Taylor Incannel Firmer Gouges Set of 6
Henry Taylor Incannel Firmer Gouges Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. Blade about 4" long. F11 - 1/4" (6mm) F12 - 3/8"...
£180.00 inc VAT
Henry Taylor Long Thin Bevel Edge Paring Chisels Set of 5
Henry Taylor Long Thin Bevel Edge Paring Chisels Set of 5
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge. Blade about 8¾" long.
£217.00 inc VAT

Henry Taylor Short Cranked Bevel Edged Chisels Set of 4Henry Taylor Short Cranked Bevel Edged Chisels Set of 4
Henry Taylor Short Cranked Bevel Edged Chisels Set of 4
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
£164.00 inc VAT
Henry Taylor Outcannel Firmer Gouges - Set of 6
Henry Taylor Outcannel Firmer Gouges - Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. Blade about 4" long. F17 - 1/4" (6mm) F18 - 3/8" (9mm) F19...
£170.00 inc VAT