Sort By
Per Page
View
Grid
List
Rob Cosman's Hand Plane Shooting Grip
What Rob says
'Our Hand Plane Shooting Grip, known as ''The Grip'', easily mounts to the side of most bevel down Jack (#5, #5-1/2, or #6) or Jointer (#7 or #8) planes. The shape of ''The Grip'' has been painstakingly shaped to conform to the crotch of your hand giving you next level control on your bench plane when using it on the shooting board.
We have designed...
Rob Cosman's Marking Gauge
What Rob says
The second most important tool in cutting dovetails is your marking gauge. The gauge line becomes part of the finished joint. Here is why I think my marking gauge will help you cut better dovetails:
The blade comes to you sharpened; designed to sever the wood fibres not crush them, leaving a crisp gauge line.
The blade is fixed in use but can be rotated to a sharper area when...
Rob Cosman's Marking Gauge Cutters with Rods
What Rob says
Its very convenient to switch out marking gauge cutter sizes by just removing the rod with cutter attached and replacing it with a different size cutter attached to a rod. Therefore, we offer our replacement cutters with rods. These rods are designed to work with the Rob Cosman marking gauge. They should fit any marking gauge that accepts a 5/16 inch (7.94mm) diameter rod, but we...
Rob Cosman's Plane AdjuSTAR Mini
What Rob says
Our Plane AdjuSTAR Mini is a smaller version of the regular AdjuSTAR, but will fit into tighter spaces. Our design makes it easier for you to reach and turn the adjuster with your fingers and easier for you to reach the frog adjustment screw with a screwdriver. We know you will love our Plane AdjuSTAR.
Made of forged brass.
Diameter: 1-7/16 inch (36.5mm) outside diameter.
Fits...
Rob Cosman's Ultimate Chisel Roll
What Rob says
.Determined to design a better chisel roll, we created the ultimate chisel roll. Our chisel roll securely holds up to 11 chisels inside with rust-inhibiting material and prevents them from falling out no matter how you carry it. The roll material is made by sandwiching a layer of Vapor Corrosion Inhibitor (VCI) material between a tough outer Cordura nylon layer and an inner cotton...
Rob Cosman's VCI Saw Case:
Large Size
Large Size
What Rob says
Protect your premium backsaws from damage and corrosion during storage or transportation with our custom made VCI (Vapor Corrosion Inhibitor) saw cases.
Our large sized saw cases are specifically designed for our regular and large handled Rob Cosman Bench Crosscut and Medium Tenon backsaws with pistol grips, but this case will accommodate similar backsaws as long as the maximum...
Rob Cosman's VCI Saw Case:
Regular Size
Regular Size
What Rob says
Protect your premium backsaws from damage and corrosion during storage or transportation with our custom made VCI (Vapor Corrosion Inhibitor) saw cases.
Our regular sized cases are specifically designed for our regular and large handled Rob Cosman Dovetail and Joinery Crosscut backsaws with pistol grips, but this case will accommodate similar backsaws as long as the maximum saw...
Rob Cosman's VCI Saw Case:
Small Size
Small Size
What Rob says
Protect your premium backsaws from damage and corrosion during storage or transportation with our custom-made VCI (Vapor Corrosion Inhibitor) saw cases.
Our small-sized saw cases are specifically designed for our 3/4 Rob Cosman Dovetail and Joinery Crosscut backsaws with pistol grips, but this case will accommodate similar backsaws as long as the maximum saw dimensions are not exceeded...
Rob Cosman's VCI Saw Case:
XXL Size
XXL Size
What Rob says
Protect your premium handsaws from damage and corrosion during storage or transportation with our custom made VCI (Vapor Corrosion Inhibitor) saw cases.
Our XXL sized saw cases are specifically designed for our regular handled Rob Cosman full sized Handsaws, but this case will accommodate similar sized handsaws as long as the maximum saw dimensions are not exceeded (see product...
Rob Cosman's Wood-Hinge Individual Jigs
What Rob says
Master craftsman Dale Nish taught me how to make an amazing wood hinge for boxes. A wooden dowel is cut into segments, a shallow hole is drilled in the centre of each dowel and a small pin is inserted into the hole for the dowel segments to pivot on. I've made thousands of boxes using this style of hinge and I have designed four jigs to precisely drill the hole in the centre of...
Gyokucho Blue Hard Ryoba 240mm
Full Name : Gyokucho Razorsaw Blue Hard Ryoba.
Blade Length : 240mm.
Overall Length : 560mm Rattan / 540mm TPE.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : Crosscut 1.7mm / 14.9. Rip Cut 3.8-2.4mm / 6.7-10.6.
Blade Thickness : 0.5mm.
Cutting Width : 0.83mm.
Teeth Pattern : Crosscut & Rip Cut.
Gyokucho Product Number : 650 Rattan / 666 TPE.
Weight : 217g Rattan / 267g TPE.
Replacement...
Gyokucho CAST Woodworking Folding Saw - Coarse Teeth - 200mm (interchangeable) blade
Works in multiple materials including greenwood, softwoods, OSB, MDF, ply, laminates.
Gyokucho CAST Woodworking Folding Saw - Medium Teeth - 200mm (interchangeable) blade
This Cast Range folding saw is a good halfway house between the aggressive coarse teeth and the finer tooth version.
Gyokucho CAST Woodworking Folding Saw - Fine Teeth - 200mm (interchangeable) blade
Full Name : Gyokucho Razorsaw Cast 200 Fine Teeth
Blade Length : 200mm.
Overall Length : 400mm open / 200mm closed.
Teeth Pitch / TPI : 1.5mm / 16.9 tpi
Blade Thickness : 0.7mm.
Cutting width : 1.0mm
Teeth Pattern : Crosscut.
Gyokucho Product Number : 5223.
Weight : 328g
Replacement Blade : R522
This Cast Range folding saw is well suited for use in your workshop, please...
Gyokucho CAST Folding Gardening Saw - Medium Teeth - Straight 200mm (interchangeable) blade
Full Name : Gyokucho Razorsaw Cast Gardening 200 Medium Teeth
Blade Length : 200mm.
Overall Length : 400mm open / 200mm closed.
Teeth Pitch / TPI : 3.5mm - 2.8mm / 7.3 - 9.1 tpi
Blade Thickness : 1.3mm.
Cutting width : 1.3mm
Taper ground blade without set.
Gyokucho Product Number : 5523.
Weight : 337g
Replacement Blade : R552
Perhaps a little self-indulgent, but we also...
Gyokucho CAST Folding Gardening Saw - Large Teeth - Straight 200mm (interchangeable) blade
Full Name : Gyokucho Razorsaw Cast Gardening 200 Large Teeth
Blade Length : 200mm.
Overall Length : 0mm open / 0mm closed.
Teeth Pitch / TPI : 4mm / 6.4 tpi
Blade Thickness : 1.3mm.
Cutting width : 1.3mm
Taper ground blade without set.
Gyokucho Product Number : 5623.
Weight : 335g
Replacement Blade : R562
Perhaps a little self-indulgent, but we also have a few keen gardeners...
Gyokucho CAST Folding Gardening Saw with 200mm Curved (interchangeable) Blade
This particular model has the same size teeth as the CAST straight blade medium saw, but has a curved blade which is favourable when cutting branches in awkward or hard-to-reach positions like above your head or below your waist.
Gyokucho Fugaku Sentei Gardening Saw - 270mm blade
This model is a long-straight bladed saw with coarse teeth for green woodworking.
Gyokucho Fugaku Edauchi Gardening Saw with 300mm curved blade
This saw has a taper ground blade with no set; this reduces the amount of friction and helps prevent binding which reduces the amount of effort required for each pull stroke. Perhaps more importantly, the clean cut will help the tree regenerate quicker. Comes with a useful sheath/guard which can be hung from a belt.
Gyokucho Pruning Shears
The Gyokucho Rakunandesu Anvil Pruning Shears.
Five years were spent developing these shears in conjunction with fruit farmers and gardeners.
We've had a play, and we love them!
Keyhole Slot Plug
Imported from Lee Valley in Canada, this brass insert takes all the trouble out of making a keyhole slot for hanging pictures or other items - no routing required. The plug mounts in a 5/16'' (7.94mm) deep hole made with a 5/8'' (15.88mm) forstner bit (sold separately) and is secured with adhesive; the grooved shank provides a good mechanical glue lock.
Only a single plug is needed...
Mortise & Tenon Magazine - Bundle of 3 Issues
Select your own choice of 3 issues of Mortise & Tenon Magazine (excluding the 10th Anniversary Issue)
Note some of these issues will only be available while stocks last.
Details of the contents of each issue can be found on the individual product pages - view contents of each issue here
Mortise & Tenon Magazine - Bundle of 5 Issues
Select your choice of 3 issues of Mortise & Tenon Magazine (excluding the 10th Anniversary Issue)
Note some of these issues will only be available while stocks last.
Details of the contents of each issue can be found on the individual product pages - view contents of each issue here
Shave & Spoon Horse Book Bundle
By Sean Hellman
Shaving Horses, Lap Shaves, and Other Woodland Vices
Sean's book contains over 400 colour photographs and illustrations to demonstrate all stages and processes of making, using, and celebrating these traditional wood-braking devices.
It also provides plans and techniques that span instructions for beginners, to more complex designs, tool use and repair, and contemporary...
Tite-Mark Accessories Kit
A bundle of useful accessories for to fit either the Tite-Mark Standard or Long.
Includes:
Extensions; One 3'' (7.62cm) and one 6'' (15.24cm) extension rod may be used individually or joined together to extend the reach of the Titemark an extra 9'' (22.86cm) by being screwed onto the blade end.
Scoring blade for deep marking, slicing veneer strips and other general...
Striking Knife
Imported from Lee Valley in Canada, this marking knife has a 55° included angle on the tip, ideal for a relaxed grip with maximum control.
The blade is perfectly ground and razor sharp. For right- or left-hand use, it marks in either direction.
The hardwood handle is designed for comfort and precise control with flats on the sides to prevent rolling.
Just under 7'' long.
Hand Strop
The Double Sided Hand Strop is used to put a final edge on blades, or to touch up a blade between sharpening sessions, a strop is a useful addition to any sharpening arsenal.
The Veritas double-sided hand strop is deliberately delivered with the leather unattached. This way, you can attach the leather as you wish, without the need to settle the ongoing debate as to which side of the leather is best...
Veritas Pullshave
After a long hiatus the popular Veritas Pullshave has made a comeback. The pullshave was designed for hollowing or recessing an area; for example, shaping and smoothing chair seats. Their unique design is the result of taking a convex spokeshave and reconfiguring it with a handle and knob to make it both easier to use and better suited to rigorous work - there is no tool like it on the market. It will...
Brace Adapter for Power Tenon Cutters
Imported from Lee Valley in Canada, this tapered square-shank adapter lets you use the 5/8'' (16mm) to 1'' (25mm) power tenon cutters with a hand brace.
Veritas PM-V11 Blades for Vintage Bench Planes
Veritas offer top-quality replacement blades for other manufacturers’ bench planes (e.g., Stanley or Record) in PM-V11 tool steel. All are lapped on the face side to a flatness tolerance of 0.0005'' (0.0127mm) or better, with an average roughness (Ra) of 5 microinches (0.000127mm) or better.
The blades are 0.100'' (2.54mm) thick, 25% thicker than the industry standard of 0.080''...
Veritas Chipbreakers (Cap Iron) for Vintage Planes
A cap iron serves to stiffen a plane blade, helping to dampen vibration and reduce the potential for blade chatter.
Made of corrosion-resistant A2 steel, our 1/8'' (3.17mm) thick cap irons are sized to fit Stanley and Record planes. The leading edge of the cap iron is machined with a relief angle to ensure it always contacts the face of the blade, so no gap can form.
Made in Canada.
Please...
Veritas PM-V11 Vintage Block Plane Blades
Veritas offer top-quality replacement blades for vintage block planes in PM-V11 tool steel. All are lapped on the face side to a flatness tolerance of 0.0005'' (0.0127mm) or better, with an average roughness (Ra) of 5 microinches (0.000127mm) or better.
The blades are 1/8'' (3.17mm) thick with a 25° bevel. The grooves in the blades are for the rear depth-adjust mechanism.
Which...
Veritas 2 1/8'' PM-V11 Blade for Vintage Spokeshaves
Top-quality replacement blades for Stanley #51/#52 and Record/Stanley #151 spokeshaves.
Produced by Veritas in their PM-V11 (Rc61-63) tool steel, the blades are 2 1/8'' (54mm) wide by 1 7/8" (47mm) high, have a 30° bevel and are lapped on the face to a flatness tolerance of 0.0005" (0.0127mm) or better over the entire surface. The blades are a hefty 3/32'' (2.4mm) thick...
Honing Compound, 6.0 oz
The Veritas honing compound, which took over two years to develop, is the most effective on the market.
It is a blend of both chromium and aluminium oxide to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather or wood.
Cuts quickly but leaves a mirror finish with a light wax film. The average...
Veritas Router Plane Storage Box
Veritas designed this case to hold their Veritas large router plane, along with various blades and accessories, keeping everything organised, accessible and portable.
It’s made from sturdy 9mm thick Baltic birch plywood, precisely milled with snug dado joints and a clear acrylic sliding lid. The plane nests in a shallow recess in the floor of the box, and holes in a rail along the back wall...
Oscar Rush Straight Gouge - tight sweep - 25mm
Oscar's gouges measure between 280mm and 300mm (11'' to 12'') overall with octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50 or 90mm diameter circle.
This gouge is a 25mm straight gouge with a tight/deep sweep (from a 30mm circle).
See Oscar at The London International Woodworking Festival Oct 24th...
Oscar Rush Straight Gouge - medium sweep - 25/35/45mm
Oscar's gouges measure between 28cm and 30cm (11'' to 12'') overall with octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
These straight bodied gouges are from a from a 50mm circle - medium sweep.
Widths - 25, 35 or 45mm
See Oscar at The London International Woodworking...
Oscar Rush Straight Gouge - shallow sweep - 25/35/45mm
Oscar's gouges measure between 280mm and 300mm (11'' to 12'') overall with octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
These straight bodied gouges are from a from a 90mm circle - shallow sweep.
Widths - 25, 35 or 45mm
See Oscar at The London International Woodworking...
Oscar Rush Long Bent Gouge - tight sweep - 25mm
Oscar's gouges measure between 280mm and 300mm (11'' to 12'') overall with octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
This long bent gouges is from a from a 30mm circle which is a tight curve.
Width - 25mm
See Oscar at The London International Woodworking Festival...
Oscar Rush Long Bent Gouge - medium sweep - 25/35/45mm
Oscar's gouges measure between 280mm and 300mm (11'' to 12'') overall including the octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
These long bent gouges are from a from a 50mm circle - medium sweep.
Widths - 25, 35 or 45mm
See Oscar at The London International Woodworking...
Oscar Rush Long Bent Gouge - shallow sweep - 25/35/45mm
Oscar's hand forged gouges measure between 280mm and 300mm (11'' to 12'') overall including the octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
These long bent gouges are from a 90mm circle - shallow sweep.
Widths - 25, 35 or 45mm
See Oscar at The London International...
The Spoon Horse & Other Small Shaves
by Sean Hellman
The Spoon Horse and other Small Shaves, is an extension of Sean's earlier book, Shaving Horses, Lap Shaves and Other Woodland Vices (Crafty Little Press, 2016). It has come about after several years using a variety of traditional designs and adapting these to suit Sean's own craft practice. The Spoon Horse has now replaced the role of Sean's larger shaving horse, when...
Inlay Thicknessing Gauge
The Latta Thicknessing Gauge by Red Rose Reproductions
Used to trim stringing to a precise thickness to fit into the grooves made by the radius cutter and straight-line cutter. This tool has two cutters, and one can be set up to get the stringing close to size, and the other for the final sizing.
Hard Maple body with an oil finish.
Inlay Slicing Gauge
The Latta Slicing Gauge by Red Rose Reproductions
This tool is used to slice veneer into thin strips to form pieces of stringing. It works much like a marking gauge, and can, in fact, be used for that purpose just as well. This is the only tool that is not ambidextrous, so it is available in both right-hand and left-hand versions to suit the user’s preference.
Hard Maple body with an oil...
Inlay Straight-Line Cutter
The Latta Straight-Line Cutter by Red Rose Reproductions
Used to cut straight grooves parallel to the sides of the workpiece. Comes with two cutters: one for cross grain and one for with the grain cutting.
Hard Maple body with an oil finish.
Inlay Radius Cutter
The Latta Inlay Radius Cutter by Red Rose Reproductions
Used to cut grooves to receive stringing on a radius. It can cut a radius from 11/16'' (17mm) to 4'' (100mm). With the optional extension rods, it can cut any size radius required. Each pair increases the maximum radius that can be cut by 3'' (76mm). Comes with two pivot points of different heights.
The radius cutter...
Mortise & Tenon Magazine - Issue 19
Table of Contents:
Lara Reisigl Domeneghetti – “A Visual Language: The Tylldal Chair’s Ongoing Journey”
“Cheating Entropy: An Interview with Antiquarian Chris Havey”
Douglas Brooks – “KIOKE: A New Way of Tradition”
Joshua A. Klein – “Build Your Library: Making a Stepback Bookcase”
Gerald W. R. Ward – “Encounters...