Sort By
Per Page
View
Grid
List
Ray Iles Billhook Sheath
A leather sheath for the Ray Iles Billhook.
Please note, one image shows a Ray Iles billhook for illustratiion purposes, the billhook is not included unless purchased.
Ray Iles Micro Froe
The Ray Iles Micro Froe is a lightweight froe perfect for spooncarving or other fine green woodworking tasks!
Manufactured with a curved beech handle which is finished with raw linseed oil.
It has a blade length of 130mm and arrives honed and ready to use.
Ray Iles Spoon Carving Scorp
The Ray Iles Spoon Carving Scorp is a quick and efficient tool for hollowing out the bowl of a spoon.
It cuts smoothly in both directions and performs best when used across the grain.
The handle is crafted from beech and finished with linseed oil for durability.
For optimal results, it is best to secure the wood firmly in a vice while working.
Ray Iles Stick Chopper
The Ray Iles 'Stick Chopper' is a very sturdy splitter manafactured by our friends at Ray Iles. It has the same spine as the Ray Iles Froe which means it can be struck with a mallet comfortably.
Perfect for splitting kindling or smaller billets of timber.
Specifications..
Overal Length 340mm
Cutting Edge 170mm
Weight 700 grams
Ray Iles Travisher
Travishers are designed for shaping and refining Windsor chair seats. This particular version has been developed in collaboration with Peter Tree, one of Britains most respected chair makers. It is crafted from air dried beech and finished with linseed oil.
The thick blade is made from 01 high-carbon steel, which is supplied honed and ready to use out of the box. The blade can be removed easily...
Thomas Jefferson's Declaration Desk
Known as the Declaration Desk, Thomas Jefferson’s writing box is small, portable and features an adjustable sloped writing surface, as well as a compartmented drawer for correspondence, writing materials and associated supplies. It was on this desk that Jefferson wrote the Declaration of Independence in 1776.
Author Ed Zappen studied the desk and its history for more than 15 years, and had...
Japanese 2'' (50mm) Plane Blade
This replacement blade is 2'' (50mm) wide and is designed for use with Stanley-style No. 4 and No. 5 hand planes. It is compatible with a wide range of tools, including vintage Stanley, and Record models, as well as more recent planes from manufacturers such as Lie-Nielsen, Veritas, and WoodRiver. (Chip-breaker not included.)
Each blade is made using traditional Japanese forging methods...
Japanese Higonokami Single-Bevel Marking Knife
Made by 5th generation knife makers this Higonokami Sadakoma is a very traditional style Japanese knife that completely friction folds into its brass handle for safe storage. The tab / lever makes it easy to unfold, and does not require a locking mechanism.
This model has a single right hand bevel which is suited to layout work.
Closed length - 4.3'' (110mm)
Open Length - 6.77''...
Japanese Higonokami Traditional Pocket Knife
Made by 5th generation knife makers this Higonokami Sadakoma is a very traditional style Japanese knife that completely friction folds into its brass handle for safe storage. The tab / lever makes it easy to unfold, and does not require a locking mechanism.
This model has a longer double sided bevel which makes it more of an all rounder as a utility knife which is handy to have in the workshop.
Closed...
Rob Cosman Moxon Vice Hardware Kit
What Rob says
'A Moxon Vise, named after Joseph Moxon (who described the vise in his book titled Mechanick Exercises), is a great vise, and best of all it is easy to build yourself. A Moxon vise is especially useful for cutting dovetails and sawing because it holds the material rock solid, and the middle of the vise is not obstructed by vise hardware. All you need is some 8/4 (2 inches / 50mm)...
Rob Cosman Shooting Board - 18 inches
What Rob says
'In my shop the shooting board is standard equipment. Once you learn to sharpen and use a hand plane, a good shooting board will do more to increase the accuracy of your work than any other tool or shop implement. Here is why mine works so well:
Made with an MDF base and a Baltic Birch plywood top for stability and long wearing properties.
Formed over a curved...
MPOWER Single Sided Diamond Sharpening Stones
MPOWER’s Single Sided Diamond Bench Stones are designed specifically for woodworkers who wish to custom build their own sharpening stations or who simply prefer using Single Sided over Double Sided Diamond Stones.
Each Single Sided Set Includes....
1 x 8'' x 2.75'' (203 x 70mm) Monocrystalline Single Diamond Bench Stone
1 x Diamond Stone Holder Clamps + Fixings
1...
MPOWER Double Sided Diamond Sharpening Stones
Each Double Sided Set Includes....
1 x 8'' x 2.75'' (203 x 70mm) Monocrystalline Double Diamond Bench Stone
2 x Magnetic Diamond Stone Holders
1 x Cleaning Block
1 x Canvas Case
1 x Magnetic Leather Strop Cover
1 x Wax Polishing Stick 60g
1 x Fully Synthetic Lapping Fluid 30ml
Diamond Stone, Strop & Wax Pairings
300 / 600 grit stone, crust-up leather...
MPOWER Double Sided Diamond Sharpening Stones with Base
Each Double Sided Set with Base Includes....
1 x 8'' x 2.75'' (203 x 70mm) Monocrystalline Double Diamond Bench Stone
1 x Magnetic Aluminium Base
1 x Cleaning Block
1 x Canvas Case
1 x Magnetic Leather Strop Cover
1 x Wax Polishing Stick 60g
1 x Fully Synthetic Lapping Fluid 30ml
Diamond Stone, Strop & Wax Pairings
300 / 600 grit stone, crust-up leather...
MPOWER Side by Side Diamond Sharpening Stone Set - Double
The MPOWER Side by Side Diamond Sharpening Stone Set has two 8'' x 2.75'' (203 x 70mm) single sided plates attached to the aluminium base, complete with two strops and polishing waxes, to give you 4 stages of sharpening in one comapct and convenient kit.
Each Side by Side Set Includes....
2 x 8'' x 2.75'' (203 x 70mm) Monocrystalline Single Diamond Bench Stone.
1...
MPOWER Side by Side Diamond Sharpening Stone Set - Triple
The complete set from MPOWER. 3 diamond plates, 3 strops and paste mounted on their triple aluminium base. Gives you 6 stages of sharpening in one comapct and convenient kit.
Each Side by Side Set Includes....
3 x 8'' x 2.75'' (203 x 70mm) Monocrystalline Single Diamond Bench Stone. 300, 600 and 1200 grits.
1 x Triple Aluminium Base
1 x Cleaning Block
1 x Canvas Case
3...
MPOWER Lapping Fluid
This diamond stone lapping fluid from MPOWER helps prevent against tools against rust and prevents the diamond surface from clogging.
It is also fully synthetic, which means it is 100% free from; nitrates, mineral oil, sulphur, chlorine and phenol.
Comes in an aluminium re-usable spray bottle.
MPOWER Stop Polishing Wax
MPOWER’s Wax Bars are unique to them. The 3 grades available in 60gram bars.......
1800 grit wax stick – Orange
2500 grit wax stick – White
5000 grit wax stick – Blue
STROPPING – FINISHING A BLADE EDGE
The Wax Bars are made up in the most part of different grades and particulate sizes of Aluminium Oxide. This highly abrasive material is then rubbed onto and bedded...
MPOWER Credit Card Diamond Sharpener
The Credit Card diamond stone is a handy little sharpener, successfully used for years by woodworkers, crafters through to other groups such as fishermen and gardeners. A very helpful design feature of the MPOWER credit card stone is the handle they've incoporated into the design. This allows you to comfortably grip the stone whilst giving your fingers some clearance from the cutting edge of the...
MPOWER 5'' Diamond File
This MPOWER 5'' (127mm) Diamond File is a sturdy “general purpose” file. It can be used for sharpening any number of different tools found in the kitchen, workshop or garden shed and of course. Double sided 300 / 600 grit, and benfits from the same surface pattern as the other MPOWER stones which helps keep the stone clean (especially when used with their lapping fluid). Working...
MPOWER Router Bit Diamond Sharpener
The smallest diamond stone in the MPOWER range is designed for router bits and saw blades. A very helpful design feature of the MPOWER router bit stone is the handle they've incoporated into the design. This allows you to comfortably grip the stone whilst giving your fingers some clearance from the cutting edge of the item you are sharpening.
Double sided 300 and 600 grit.
Rubber Side Handle.
Works...
MPOWER Magnetic Diamond Stone Holder
These handy little stone holders can hold a wide range of diamond stones, including the credit card and router bit stones. Helpful, as they raise the stone from the surface, giving clearance for handles when sharpening parallel to the surface.
Tormek Knife Sharpening Kit
Make every knife your favourite.
Turn your water-cooled sharpening system into a knife sharpening powerhouse with the KSK-106 Knife Sharpening Kit. It lets you sharpen virtually any knife with maximum accuracy, edge trailing or edge leading. The kit also enables controlled deburring, honing and polishing using jigs for consistent, repeatable results.
This is the ultimate kit for knife sharpening...
Veritas Carver’s Seat-Vise
This seat-vise permits great range of motion to set your work at a comfortable height and angle, then holds it firmly in position while you carve.
It can be used on just about any flat surface where you can sit, held down by your own body weight for stability. Three independent four-arm knobs let you tilt and rotate the work or adjust the height in a 2 3/4'' (70mm) range, then quickly tighten...
Veritas Strap Kit for Steam Bending
To bend steamed wood successfully you need a strap kit.
The strap keeps the wood on the outside of a bend from stretching and failing. Steamed wood can be compressed a remarkable amount, but it will stretch less than 1/2 of 1% without failing.
For simple bends (i.e., one or more bends in the same plane and in the same direction) you need a shop-made form and fixed end stop, plus a strap kit (adjustable...
Veritas 150mm Aluminium Bench Rule
Shaped much like a classic school ruler, this relatively narrow rule is lightweight and easy to handle, making it an ideal choice for precise drawing and design tasks.
The fine laser-etched markings stand out clearly against the matte black anodized finish, with one edge that reads right to left and the other left to right. All scales are graduated in millimetre increments.
Cut from a solid aluminum...
Veritas 300mm Aluminium Bench Rule
Shaped much like a classic school ruler, this relatively narrow rule is lightweight and easy to handle, making it an ideal choice for precise drawing and design tasks.
The fine laser-etched markings stand out clearly against the matte black anodized finish, with one edge that reads right to left and the other left to right. All scales are graduated in millimetre increments.
Cut from a solid aluminum...
Veritas 450mm Aluminium Bench Rule
Shaped much like a classic school ruler, this relatively narrow rule is lightweight and easy to handle, making it an ideal choice for precise drawing and design tasks.
The fine laser-etched markings stand out clearly against the matte black anodized finish, with one edge that reads right to left and the other left to right. All scales are graduated in millimetre increments.
Cut from a solid aluminum...
Veritas 600mm Aluminium Bench Rule
Shaped much like a classic school ruler, this relatively narrow rule is lightweight and easy to handle, making it an ideal choice for precise drawing and design tasks.
The fine laser-etched markings stand out clearly against the matte black anodized finish, with one edge that reads right to left and the other left to right. All scales are graduated in millimetre increments.
Cut from a solid aluminum...
Ray Iles Drawbore Pins 3/8'' x 7''
As with traditional drawbore pins, the shape is slightly offset, for easy removal.
Used for drawing together mortice and tenon joints.
Manufactured by Ray Iles, from EN9 spring steel.
Beech Carver Pattern.
Ray Iles Newtown Billhook
The Ray Iles Newtown Billhook is a masterfully crafted traditional cutting tool, designed for precision, durability, and authentic woodland performance.
Its distinctive Newtown pattern features a sharply curved blade that excels at cutting, trimming, and shaping green wood. Whether you're hedgelaying, coppicing, or clearing brush, the blade delivers clean, controlled cuts with minimal effort....
Ray Iles Premium Froe
This 10 1/2'' Ray Iles premium froe is the same size as the standard Ray Iles large froe, but the bevels have been gently curved, making it easier to use, particularly when first entering the wood.
As with the large froe, it is tapered from top to bottom, with a tapered eye and 14'' beech handle. The shaft had been treated with raw linseed oil.
Arbortech Cordless Mini Grinder MG1000 & Woodworking Pack
This bundle includes the Mini Grinder and the Mini Grinder Woodworking Pack.
The Arbortech Mini Grinder MG1000 sets a new benchmark. Its powerful brushless motor and DEWALT® 18V battery compatibility deliver exceptional results, while the long extension arm provides unmatched visibility and access to confined spaces — far outperforming traditional grinders. Enjoy effortless material removal...
Temple Tool Co. The "Joinery Master" Dozuki Combo
This "Joinery Master" Dozuki Combo includes both the
Dozuki Pull Saw, Fine Rip Cut 240mm and the Fine Crosscut 240mm
''Dovetail Saw''- Full-sized Dozuki pull saw with fine Rip-Cut teeth (aka Hozohiki Saw). Designed for dovetails, tenon cheek cuts, box joints, other fine rip-cuts. For soft and hard woods.
Blade Length 9.5'' (240mm)
Overall Length 21.6''...
Temple Tool Co. Essential Woodworking 4 Saw Bundle
The Essential Woodworking 4 Saw Bundle includes
Dozuki Pull Saw, Fine Rip Cut 240mm
Dozuki Pull Saw, Fine Crosscut 240mm
Flush Cut Pull Saw 150mm
Ryoba Pull Saw, Double Edge 240mm
The handle is made of Japanese Wingnut (in the walnut family) and is stained a rich dark brown colour. The blade has a squared end to help users quickly distinguish it from the rip-cut version that has...
Temple Tool Co. Fine Joinery 4 Saw Set
The Fine Joinery 4 Saw Set includes
Dozuki Pull Saw, Fine Universal-Cut 150mm
Dozuki Pull Saw, Ultra Fine Crosscut 180mm
Flush Cut Pull Saw 150mm
Ryoba Pull Saw, Double Edge 180mm
The handle is made of Japanese Wingnut (in the walnut family) and is stained a rich dark brown colour. The blade has a squared end to help users quickly distinguish it from the rip-cut version that has...
Temple Tool Co. Timber Framing 2 Saw Combo
The Timber Framing 2 Saw Combo includes both the Temple Framing Saws, 390mm in length - Crosscut & Rip Cut
The handle is made of Japanese Wingnut (in the walnut family) is stained a rich dark brown colour. The blade has a squared end to help users quickly distinguish it from the rip-cut version that has a rounded end.
Expertly crafted in Japan, Temple Tool Co. blends legendary Japanese craftsmanship...
Mortise & Tenon Magazine - Issue 20
Table of Contents below:
Joshua A. Klein – “Circle of Influence: Bill Coperthwaite’s Joy in Making Things”
Björn Svantesson – “Bridging the Gap: An Exploration of Scandinavian Pre-industrial Planemaking”
Randy S. Wilkinson & Richard R. Hark – “In Search of True Mahogany: From 18th-Century Craft to 21st-Century Technology”
Nev...
Gransfors Bruk Wildlife Hatchet and Stone Kit
A great gift for the outdoor enthusiast.
The gift box includes the Gränsfors Bruk Wildlife Hatchet packaged together with the Gränsfors Bruk ceramic sharpening stone.
Gransfors Bruk Large Straight Adze 80mm
Please note the picture depicts the 56mm wide adze, this listing is for the wider 80mm version.
Gransfors Bruk Small Gutter Adze Radius 25mm
The Gränsfors Bruk Small Gutter Adze is an adze with a different cutting edge that is rounded up at both ends. Ideal for hollowing out timber, for example to make a trough, old-style gutters and notchwork in log-building, for which the rounded edge is ideal.
The Small Gutter Adze is usually kept for when you are working close to the log, making a small axe with a shorter handle preferable....
Gransfors Bruk Small Gutter Adze Radius 40mm
The Gränsfors Bruk Small Gutter Adze is an adze with a different cutting edge that is rounded up at both ends. Ideal for hollowing out timber, for example to make a trough, old-style gutters and notchwork in log-building, for which the rounded edge is ideal.
The Small Gutter Adze is usually kept for when you are working close to the log, making a small axe with a shorter handle preferable....
Gransfors Bruk Small Straight Adze 56mm
The Gränsfors Small Straight Adze is an old Scandinavian axe design with a transverse edge. It is perhaps best described as ‘a chisel you can chop with’. The adze has a wide range of applications. It can be used to square off logs and planks to create a smooth surface, to shape beams and purlins, and to form ribs for boats. The Small Straight Adze is usually kept for when the user...
Gransfors Bruk Medium Carving Axe 472
The Gränsfors Bruk Medium Carving Axe is a versatile carving axe that balances power and precision, with a size and weight suitable for both new and experienced woodworkers.
The design is based on the Large Carving Axe, developed in collaboration with master craftsmen Wille Sundqvist and Onni Linnanheimo, inspired by traditional carving axes, but scaled to about 90% of the original size.
The...
Temple Tool Co. Japanese Bench Chisels
Japanese Bench Chisels ''Oire Nomi''. A general purpose bench chisel for paring and chopping.
Approximate overall length 9'' (255mm)
Laminated Shirogami No.2 White Paper Steel
Double scallop/hollow grind on back from the 12mm (1/2'') up, and triple on 36mm.
Hand forged in Japan.
Like many other hand forged Japanese chisels they are hand ground so you...
Temple Tool Co. Japanese Trowel Chisel
Kote Nomi (trowel chisels) are specialised Japanese hand-forged, bent-neck chisels designed for precision paring in tight spaces, such as cleaning up the bottom of grooves, dadoes, sliding dovetails, and mortises. They feature a laminated steel blade with a steep bevel and a ''gooseneck'' shape to keep hands clear of the work.
Blade width 13/16'' (21mm)
Overall Length...
Temple Tool Co. Japanese Brass Bar Clamps
A pair of Japanese Brass Bar Clamps by Temple Tool Co. Also know as Hatagne these lightweight clamps are ideal for smaller, more intricate work where it is imperative that you do not apply too much pressure.
300mm overall length
Sold as a pair (2 pieces)