Sort By
Per Page
View
Grid
List
Camelia Oil
We like vegetable oil-based Camellia Oil because it is non-toxic, odor free, wipes on easily and leaves a thin dry film on your knife. Dry your knife and coat with a thin layer of camellia oil.
Traditional Japanese camellia oil - food safe, 240ml bottle with applicator.
Japanese Waterstones - Toishi-Ohishi
Toishi-Ohishi offer 7 single grit stones and 6 combination stones.
These stones are 8" (205mm) long, 3 inches (75mm) wide and a minimum of 1" (25mm) thick*.
The 3" (75mm) width makes them particularly useful when honing wide plane blades, knives or cut throat razors.
*Stone sizes:
220 grit - 205 x 80 x 35mm
All other single grit stones 205 x 75 x 25mm
Combination stones...
Kamanomi Japanese Chisel
Used for cleaning the corners of joints.
Liquid Ink 200ml - Black
For Sumitsubo and Sumisashi, it is water soluble.
Liquid Ink 200ml - Red
For Sumitsubo and Sumisashi, it is water soluble.
Morinomi Japanese Chisel
Used for cleaning the bottom of mortices.
Nagura Stone
The Nagura correcting stone is used to condition waterstones during use. For natural waterstones their use is to wear away hard particles or contamination in the waterstone, and to selectively allow flattening by being rubbed on a high spots on the stone. Another usage is to create slurry. Use with Ohishi stones of more than 1000 grit.
Nagura Stone size: 75 x 25 x 25mm
Nakaya Classic Series - Japanese Saw Set (4 saws)
Set of 4 Japanese Saws in linen roll:
Ryoba 240mm
Kataba 220mm
Kataba 300mm
Dozuki 240mm
Nakaya Dozuki 240mm Japanese Folding Saw
Blade 0.3mm thick
Spacing 1.5mm for cross cut and rip cut
Nakaya Dozuki Classic Saw
A dovetail saw with back, very fine teeth especially suitable for cutting tenon shoulders and precise wood joints.
A short robust little saw, 0.3mm thick blade.
Nakaya Dozuki Gold Saw
The Dozuki has a metal spine to give some rigidity to the blade.
Professional quality pull saws with replaceable blades. These blades are robust and with usual wear they should last a long time. More care must be taken with the thinnest blade such as the Dozuki 150 & 210 saws which are designed for very fine cuts.
A choice of 4 sizes
Dozuki Gold 150 - 150mm blade - 0.2mm thick, spacing...
Nakaya Golden Series - 2 Saw Set
This set comprises the short 150mm blade very fine Dozuki (0.2mm thickness blade) and the Meiko saw which combines cross-cut and rip cut teeth on the saw edge.
WDG150 + WKG250M
Nakaya Golden Series - 4 Saw Set
Set of 4 Saws in traditional heavy linen roll.
The set comprises:
Ryoba Gold 240mm - doublesided for cross cut and rip cut
Dozuki Gold 210mm - a very fine blade (0.2mm thick)
Dozuki Gold 240mm - a more robust blade
Kataba Gold 240mm - single edge cross cut with no spine to allow deeper cuts.
Nakaya Japanese Folding Saw Set
Fujiyama Noko Japanese Folding Saws with high quality rubber handle.
Length when folded 315mm
Teeth protecting and space saving.
Folding Saw Set comes with: Kataba and Ryoba blade with adapter, Dozuki blade with metal back
Spare blades available and are listed with the individual saws below this product.
Nakaya Kataba 250mm Japanese Folding Saw
Blade 0.5mm thick
Spacing 1.36mm for cross cut
Nakaya Kataba Classic Saw
Fine toothed saw without back for trimming and deep cuts. The flexible blade also makes it extremely suitable for work in hard to reach areas.
250mm 0.5mm thick blade
Now supplied without rattan on handle
Nakaya Kataba Gold & Meiko Gold Saw
The Kataba - single edge cross cut saw with no back or metal spine allowing you to make deeper cuts.
Kataba Gold 240 - 240mm blade - 0.4mm thick, spacing 1mm setting 0.45mm WKG240
Kataba Meiko Gold 250 - 250mm blade - 0.5mm thick WKG250M - This is a very clever saw combining x-cut and rip teeth on one edge of a 0.5mm thick blade.
Nakaya Ryoba 240mm Classic Saw
Combination saw with trapezoid teeth for crosscuts andt triangular teeth for rip-cut.
Universal saw for workshop and carpentry, also ideal for mortice and tenon joints.
0.5mm thick blade, now supplied without rattan on handle.
Nakaya Ryoba 240mm Japanese Folding Saw
Blade 0.5mm thick
Spacing Cross Cut 1.66mm
Spacing Rip Cut 2.62-4mm
Nakaya Ryoba Gold Saw
A double edged blade with X-cut & rip edges and traditional style handle.
A choice of 4 sizes
220mm blade - 0.4mm thick (spacing of teeth 1.3mm cross 2.0-3.4mm rip cut setting 0.7mm) WRG220
240mm blade - 0.5mm thick (spacing of teeth 1.6mm cross 2.7-3.9mm rip cut setting 0.75mm) WRG240 - This is our most popular size.
270mm blade - 0.6 mm thick (spacing of teeth 2.5mm crosscut, 3.3-5.8mm...
Nakaya Universal Dozuki Saw
This Japanese saw combines both rip and cross cut on one cutting edge. The saw has a back and the blade thickness is 0.3mm.
J-WDU245 tooth spacing 1.5 mm (finer)
J-WDU248 tooth spacing 1.8 mm (coarser)
Oire Nomi Suminagashi Japanese Chisel
The Oire Nomi Suminagashi Japanese Chisel is a premium tool for precision woodworking, crafted using traditional Japanese techniques. This chisel is perfect for detailed carving and joinery, offering superior sharpness and durability.
Length: 220mm (60mm blade)
Widths: 6mm, 9mm, 12mm, 18mm, 24mm, and 30mm
Blade: Made from Suminagashi steel, known for its layered construction and strength.
Design:...
Replacement Blade for Nakaya Dozuki 240mm Folding Saw
Replacement blade for the Fujiyama Dozuki 240mm Folding Saw.
Blade 0.3mm thick.
Spacing 1.5mm for cross cut and rip cut.
Replacement Blade for Nakaya Dozuki Classic Saw
A replacement blade for the Dozuki Classic dovetail saw.
0.3mm thick blade with very fine back teeth. Especially suitable for cutting tenon shoulders and precise wood joints.
Replacement Blade for Nakaya Dozuki Gold Saw
Replacement blade for the Dozuki Gold Saw.
These blades are robust and with usual wear they should last a long time. More care must be taken with the thinnest blade such as the Dozuki 150 & 210 saws which are designed for very fine cuts.
A choice of 4 sizes
Dozuki Gold 150 - 150mm blade - 0.2mm thick, spacing 0.83mm, setting 0.35mm WDG150 - A very fine 150mm long blade.
Dozuki Gold...
Replacement Blade for Nakaya Kataba 250mm Folding Saw
Blade 0.5mm thick
Spacing 1.36mm for cross cut
Replacement Blade for Nakaya Kataba Classic Saw
Replacement blade for the Kataba Classic Saws.
250mm 0.5mm thick blade
300mm 0.6mm thick blade
Replacement Blade for Nakaya Kataba Gold & Meiko Gold Saw
Replacement blades for the Kataba Gold and Meiko Gold Saws.
Kataba Gold 240 - 240mm blade - 0.4mm thick, spacing 1mm setting 0.45mm WKG240
Kataba Meiko Gold 250 - 250mm blade - 0.5mm thick WKG250M - This is a very clever saw combining x-cut and rip teeth on one edge of a 0.5mm thick blade.
Replacement Blade for Nakaya Ryoba 240mm Classic Saw
Replacement blade for the 240mm Ryoba Classic Saw.
0.5mm thick blade with trapezoid teeth for crosscuts andt triangular teeth for rip-cut.
Replacement Blade for Nakaya Ryoba 240mm Folding Saw
Blade 0.5mm thick
Spacing Cross Cut 1.66mm
Spacing Rip Cut 2.62-4mm
Replacement Blade for Nakaya Ryoba Gold Saw
Replacement blades for Ryoba Gold Saw.
A double edged blade with X-cut & rip edges and traditional style handle.
A choice of 4 sizes
220mm blade - 0.4mm thick (spacing of teeth 1.3mm cross 2.0-3.4mm rip cut setting 0.7mm) WRG220
240mm blade - 0.5mm thick (spacing of teeth 1.6mm cross 2.7-3.9mm rip cut setting 0.75mm) WRG240 - This is our most popular size.
270mm blade - 0.6 mm thick...
Replacement Blade for Nakaya Universal Dozuki Saw
Replacement blade for the Universal Dozuki Saw.
This saw combines both rip and cross cut on one cutting edge
J-WDU245 spacing 1.5 mm (finer)
J-WDU248 spacing 1.8 mm (coarser)
Sandpaper for Stone Flattener
1 piece each of 60 and 80 grit paper for the flattening block. Abrasive is sticky backed to attach to the flattening block.
Set of 7 Single Grit Toishi + Nagura Stone
This set includes 7 single grit stones and the Nagura correcting stone.
These stones are 3 inches (75mm) wide which is particularly useful when honing wide plane blades, knives or cut throat razors.
These stones cut quickly but are dense and hard enough not that most of the them do not require soaking prior to use (the exceptions are the 220 & 600 grits). A sprinkle of water is all you need...
Shinwa 45° Mitre Square - Metric
Stainless steel mitre square.
Measurements on both sides
Angular accuracy 45° & 135°: 0.2 mm or less per 100 mm
Base length: 115mm
Shinwa 45° Mitre Square with 90° Guide - Metric
Stainless steel mitre square.
Measurements on both sides
Angular accuracy 45°, 90° & 135°: 0.2 mm or less per 100 mm
Base length: 115mm
Shinwa 90° Try Square - Metric
Stainless steel square.
Measurements on both sides
Angular accuracy 90°: 0.1 mm or less per 100 mm
Outside measurements: 150mm
Inside measurements: 120mm
Base length: 100mm
Shinwa Combination Square 45°, 90° & 135° - Metric
Shinwa Combination Metric Square made of stainless steel includes a mitre gauge and square.
Measurements on both sides
Angular accuracy 45° & 135°: 0.2 mm or less per 100 mm
Angular accuracy 90°: 0.1 mm or less per 100 mm
Base length: 163mm
Shinwa Ink Line (Sumitsubo)
With a sealed ink reservoir to prevent ink from leaking out or drying up. Automatic spring-loaded recoil with locking mechanism. Unbreakable plastic body and thread bob.
No ink is included.
Body length 180 mm, thread length 20 m.
New design (shiny new colours!)
Shinwa Ink Line (Sumitsubo) + Black Ink
With a sealed ink reservoir to prevent ink from leaking out or drying up. Automatic spring-loaded recoil with locking mechanism. Unbreakable plastic body and thread bob.
Includes 200ml black ink.
Body length 180 mm, thread length 20 m.
New design (shiny new colours!)
Shinwa Mini Ink Line
Professional quality, compact Sumitsubo.
Body 130 mm, line length 15 m.
No ink is included.
New design (shiny new colours!)
Shinwa Mini Ink Line + Black Ink
Professional quality, compact Sumitsubo.
Body 130 mm, line length 15 m.
Includes 200ml black ink.
New design (shiny new colours!)
Shinwa Sliding Bevel 200mm
Shinwa Sliding Bevels are ideal for marking out any angle. This one is 200mm (8") we also stock a 250mm (10") one.
Can be adjusted to any angle and is lightweight.
Fixing screw is on the end, therefore is never in the way.
Aluminium Handle
Stainless Steel Blade
Shinwa Sliding Bevel 250mm
Shinwa Sliding Bevels are ideal for marking out any angle. This one is 250mm (10") we also stock a 200mm (8") one.
Can be adjusted to any angle and is lightweight.
Fixing screw is on the end, therefore is never in the way.
Aluminium Handle
Stainless Steel Blade
Sokosarai Japanese Chisel
Used for scraping and levelling the bottom of mortices.
Stone Flattener
Length 400 mm, width 100 mm including glass plate and sanding paper. It is important to flatten your sharpening stone periodically.
Comes with 1 piece each of 60 and 80 grit paper. Abrasive is sticky backed to attach to the flattening block.