Sort By
Per Page
View
Grid
List
Henry Taylor Bevel Edge Chisels
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles and brass ferrules.
Made in Sheffield, England for over 150 years.
F55 - 1/4" (6mm)
F56 - 3/8" (9mm)
F57 - 1/2" (12mm)
F59 - 3/4" (19mm)
F60 - 1" (25mm)
Henry Taylor Bowl Adze
Sheffield made hand forged adzes by Henry Taylor for single handed use.
This one is a tight gouge (sweep 9), however this lucky fella is outcannel which makes it a Bowl Adze.
At the other end to the cutting edge is a square faced hammer poll.
All Henry Taylor adzes have an ash handle of 250mm (about 10") .
The overall head size (from the square face of the hammer poll to the cutting edge)...
Henry Taylor Cranked Bevel Edge Paring Chisels
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times.
Blade about 8¾" long.
Henry Taylor Cranked Bevel Edge Paring Chisels Set of 5
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times.
Blade about 8¾" long.
Set includes 1/4", 1/2", 3/4", 1" and 1 1/4" chisels.
Henry Taylor Hand Adze Deep Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes; this one is a tight incannel gouge (sweep 9), and is offered with an incannel or outcannel grind.
The outcannel grind is favoured by those working concave surfaces as it allows the leading edge to enter the working area easier.
At the other end to the cutting edge is a square faced hammer...
Henry Taylor Hand Adze Shallow Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a gouge end with a shallow/mid gouge or there is a tight gouge (sweep 9) and a 50mm (2") straight edge (like a chisel).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size (from the...
Henry Taylor Hand Adze Straight Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a 50mm (2") straight edge (like a chisel) or curved end (like a gouge) with either a shallow/mid gouge or a tight gouge (sweep 9).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size...
Henry Taylor Heavy Duty Socket Firmer Chisels
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers.
The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased.
Forged...
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers.
The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased.
Forged...
Henry Taylor Incannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Henry Taylor Incannel Firmer Gouges Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Henry Taylor Long Thin Bevel Edge Paring Chisels
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge.
Blade about 8¾" long.
Henry Taylor Long Thin Bevel Edge Paring Chisels Set of 5
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge.
Blade about 8¾" long.
Henry Taylor Negative Rake Cove Tool
The Henry Taylor negative rake cove tool was designed to be used with The Decorating Elf but can also be used as an individual tool. When using with the Decorating Elf allows you to make coves.
Ideal for end grain work and spindle work.
Made with a high speed steel blade.
Henry Taylor Negative Rake Fine Point Tool
The Henry Taylor negative rake fine point tool was designed to be used with The Decorating Elf but can also be used as an individual tool.
Ideal for fine detail and is made with a high speed steel blade.
 1.png "20% off")
Henry Taylor No.1 Spoon Bent Chisels
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Spoon bent tools are for those awkward...
.png "Last Ones!")
Henry Taylor No.11 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.11 Straight Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor No.2 Skew Chisels
20% discount from price shown. Whilst stocks last!
Henry Taylor No.3 Allongee Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor No.3 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.3 Straight Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor No.5 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.5 Straight Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor No.7 Fishtail Gouges
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version...
Henry Taylor No.7 Straight Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor No.9 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.9 Straight Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor Outcannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F17 - 1/4" (6mm)
F18 - 3/8" (9mm)
F19...
Henry Taylor Outcannel Firmer Gouges - Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F17 - 1/4" (6mm)
F18 - 3/8" (9mm)
F19...
Henry Taylor Registered Mortice Chisel
Made in Sheffield, England for over 150 years.
Blade about 5½" long.
F23 - 1/4" (6mm)
F24a - 3/8" (9mm)
F24 - 1/2" (12mm)
F25 - 3/4" (19mm)
F26 - 1" (25mm)
Henry Taylor Registered Mortice Chisel Set of 5
Made in Sheffield, England for over 150 years.
Blade about 5½" long.
F23 - 1/4" (6mm)
F24a - 3/8" (9mm)
F24 - 1/2" (12mm)
F25 - 3/4" (19mm)
F26 - 1" (25mm)
Henry Taylor Short Cranked Bevel Edged Chisels
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
Henry Taylor Short Cranked Bevel Edged Chisels Set of 4
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
Henry Taylor Swan Neck Chisel 1/4''
A Henry Taylor swan neck chisel is used to clean the bottom of mortices. The chisel is levered in use, not struck.
Available in 1/4".
The Decorating Elf
The Decorating Elf is the most versatile texturing tool available and so simple to use.
Designed by William Hudson (USA), known to his friends as the "Turning Elf". Ideal for decorating pens, boxes, finials, bowls, jewellery, Christmas decorations, toys, key rings, pepper & salt mills and lots, lots more.
Cuts wood - side and end grain, acrylics, alternative ivory, bone and antler.
Use...
The Decorating Elf - Ball Cutter
The ball cutter is an optional extra for The Decorating Elf.
The Decorating Elf is the most versatile texturing tool available and so simple to use.
Designed by William Hudson (USA), known to his friends as the "Turning Elf". Ideal for decorating pens, boxes, finials, bowls, jewellery, Christmas decorations, toys, key rings, pepper & salt mills and lots, lots more.
Cuts wood - side and...
The Decorating Elf - Bud Cutter
The bud cutter is an optional extra for The Decorating Elf.
The Decorating Elf is the most versatile texturing tool available and so simple to use.
Designed by William Hudson (USA), known to his friends as the "Turning Elf". Ideal for decorating pens, boxes, finials, bowls, jewellery, Christmas decorations, toys, key rings, pepper & salt mills and lots, lots more.
Cuts wood - side and end...
The Decorating Elf - Cylinder Cutter
The cylinder cutter is an optional extra for The Decorating Elf.
The Decorating Elf is the most versatile texturing tool available and so simple to use.
Designed by William Hudson (USA), known to his friends as the "Turning Elf". Ideal for decorating pens, boxes, finials, bowls, jewellery, Christmas decorations, toys, key rings, pepper & salt mills and lots, lots more.
Cuts wood - side...
Henry Taylor Large Slipstone
One of 2 slipstones made by Henry Taylor, this one measures 115 x 45mm and tapers from 11mm to 4mm in thickness.
Henry Taylor No. 1 Allongee Chisel - 1 1/4'' (32mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor No.10 Long Bent Gouge - 1' (25mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor No.11 Straight Gouge - 1' (25mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor No.3 Allongee Gouge - 2' (50mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor No.39 60° 'V' Parting Tool - 3/4' (20mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor No.4 Allongee Gouge - 2' (50mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Henry Taylor No.5 Allongee Gouge - 2' (50mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.