Sort By
Per Page
View
Grid
List
David Barron Dovetail Guides
The David Barron Dovetail Guides are back!
The 1:6, 1:8 and the 90° guides are now available from stock. The 1:4, 1:5, 1:7, spline, and the 45° guides will follow later this year.
The David Barron Dovetail Guide designed to guide a saw with powerful magnets for perfect cuts every time!
Cuts both pins and tails, on through and half blind dovetails.
David Barron Saw & 1 to 6 Dovetail Guide Bundle
The ever popular Gyokucho Razorsaw Dozuki 240mm Rip saw bundled together with the David Barron 1:6 Dovetail Guide. This is the saw David recommend using with his guides.
David Barron Saw & 1 to 8 Dovetail Guide Bundle
The ever popular Gyokucho Razorsaw Dozuki 240mm Rip saw bundled together with the David Barron 1:8 Dovetail Guide.
This is the saw David recommends using with his guides.
Gyokucho Razorsaw Dozuki 240mm Rip
As recommended by David Barron for his range of dovetail guides.
David Barron 90 degree Guide
A very useful aluminium magnetic jig from David Barron for guiding a saw at right angles. Great for cutting shoulders, tenons, cheeks and variable finger joints. Will work with any style hand saw although the Gyokucho 372 saw works a treat for both cross and rip cuts.
David Barron 45 degree Guide
A useful aluminium magnetic guide from David Barron for making exact 45° cuts. Great for dovetail mitres, mouldings, picture frames etc.
David Barron Dovetail Spline Guide
Designed by David Barron to be used across the mitred corners of boxes. It accurately cuts the slots for reinforcing splines, with a 1:6 dovetail angles on one side and a 90° edge on the other.
Veritas Magnetic Guide & Saw
Hand-cut dovetails remain the mark of the skilled cabinetmaker and a feature that buyers look for in high-end furniture. Veritas has developed a guide and saw system that lets amateurs achieve professional results. The system also allows the seasoned expert to produce dovetail joints more quickly and with less effort.
The Veritas Magnetic Dovetail 1:8 Guide, clamps in position and holds the saw...
Veritas Magnetic Saw Guides
This anodised aluminium Veritas Magnetic Saw Guide helps keep your saw on the right track and perpendicular to a workpiece. It provides a registration surface about 32mm tall. It is particularly useful when crosscutting tenon shoulders or the edges of a dado, which is where you want your saw to cut straight and true. You can hold the guide onto your workpiece with a hand or secure it with clamps.
The...
Veritas Saw Guide Clamps
These Veritas Saw Guide Clamps are 50mm capacity clamps are anodised aluminium with solid brass screws and pads. They fit into the T-slot on the underside of the saw guide leaving the upper surface clear.
These clamps ensure the guide is secure and firmly held in place resulting in a higher degree of accuracy. Note they can also be used with the magnetic saw guide.