Blade for Veritas Flat & Round Spokeshaves
Blade for Veritas Flat & Round Spokeshaves
Replacement PM-V11 blade to fit both the Veritas Flat (05P3373) and Round (05P3374) Spokeshaves.
£32.00 inc VAT
Blade for Veritas Low-Angle Spokeshave
Blade for Veritas Low-Angle Spokeshave
Replacement PM-V11 blade to the Veritas Low-Angle Spokeshave (05P3273).
£34.85 inc VAT

Blade for Veritas Skew Rebate Plane
Blade for Veritas Skew Rebate Plane
Replacement PM-V11 blade to fit the right hand Veritas Skew Rebate.
£47.50 inc VAT
Blades for the Veritas Detail Palm PlanesBlades for the Veritas Detail Palm Planes
Blades for the Veritas Detail Palm Planes
Replacement blades for the Veritas detail palm planes. (Convex and double-convex planes use the same blade.)
from £11.50 inc VAT

Blades for Veritas Apron PlaneBlades for Veritas Apron Plane
Back In Stock
Blades for Veritas Apron Plane
Veritas 1 1/4" blade for the Veritas Apron Plane. Available in O1 or PM-V11 steel with a 25° bevel, or an A2 toothed blade at 38°.
from £34.50 inc VAT
Long Rod for Veritas Skew Block Plane
Long Rod for Veritas Skew Block Plane
This optional 3 1/2" stainless-steel fence rod is 1 1/8" longer than the 2 3/8" rod supplied with the Veritas skew block plane to let you add a thicker fence extension (e.g., a tapered spacer for angled cuts) without restricting cutting width. Made in Canada.
£7.25 inc VAT

Long Rods for Veritas Skew Rabbet
Long Rods for Veritas Skew Rabbet
Double guide rods and a special collet locking system prevent the fence from racking, and the large brass knobs allow fast and easy adjustments without tools. The fence can be positioned to allow a maximum rabbet width of 1½". Prices include VAT
£15.00 inc VAT
Optional Depth Stop for Veritas Skew Block PlaneOptional Depth Stop for Veritas Skew Block Plane
Optional Depth Stop for Veritas Skew Block Plane
For use with the skew block plane, this depth stop lets you finish cuts at a precise depth. The cast zinc-aluminum alloy arm is held in place by the front knob. The steel shoe is adjustable from flush to a maximum depth of 5/8" and has relieved edges to avoid marking your work. Made in Canada.
£19.50 inc VAT

Pair of Mounting Knobs for Veritas Universal Variable Angle Fence
Pair of Mounting Knobs for Veritas Universal Variable Angle Fence
A pair of stainless-steel knobs for mounting the Veritas universal variable angle plane fence to the bevel-up jointer, jack rabbet and shooting planes. Made in Canada.
£7.25 inc VAT
Replacement Blade for Veritas Cabinetmakers Trimming Plane
Replacement Blade for Veritas Cabinetmakers Trimming Plane
Replacement lapped O1 steel blade for the Veritas Cabinetmaker's Trimming Plane. Hardened to Rc58-60. Made in Canada.
£36.95 inc VAT

Spare Blade for Veritas Edge-Trimming Plane
Spare Blade for Veritas Edge-Trimming Plane
Replacement blade for the Veritas Edge-Trimming Plane. 1/8" thick, 1 1/4" wide replacement blades in PM-V11 steel work wood up to 1" wide. Made in Canada.
£32.00 inc VAT
Spare Blades for the Veritas Detail Rabbet PlanesSpare Blades for the Veritas Detail Rabbet Planes
Spare Blades for the Veritas Detail Rabbet Planes
The lapped replacement blades for the Veritas detail rabbet planes are made of O1 tool steel.
£12.50 inc VAT

Spare Blades for the Veritas Scrub PlaneSpare Blades for the Veritas Scrub Plane
Spare Blades for the Veritas Scrub Plane
Available in high-carbon steel (Rc58-60) or PM-V11 steel (Rc61-63). The blade edge is ground with a 3" radius, so it takes an aggressive cut.
from £30.00 inc VAT
Spare PM-V11 Blade for Veritas Bullnose Shoulder Plane
Spare PM-V11 Blade for Veritas Bullnose Shoulder Plane
Replacement PM-V11 blade for the Veritas bullnose shoulder plane are lapped, 1/8" (0.125") thick.
£53.50 inc VAT

Spare PM-V11 Blade for Veritas Large Shoulder Plane
Spare PM-V11 Blade for Veritas Large Shoulder Plane
Replacement PM-V11 blade for the Veritas large shoulder plane are lapped, 1/8" (0.125") thick.
£56.95 inc VAT
Spare PM-V11 Blade for Veritas Medium Shoulder Plane
Spare PM-V11 Blade for Veritas Medium Shoulder Plane
Replacement PM-V11 blade for the Veritas medium shoulder plane are lapped, 1/8" (0.125") thick.
£56.50 inc VAT

Spare PM-V11 Blade for Veritas Small Shoulder Plane
Spare PM-V11 Blade for Veritas Small Shoulder Plane
Replacement PM-V11 blade for the Veritas small shoulder plane are lapped, 1/8" (0.125") thick.
£54.75 inc VAT
Veritas 2 1/4'' Blades for Bevel-Up and Low-Angle Bench PlanesVeritas 2 1/4'' Blades for Bevel-Up and Low-Angle Bench Planes
Veritas 2 1/4'' Blades for Bevel-Up and Low-Angle Bench Planes
2 1/4" blades that fit the Veritas Bevel-Up Smoother, Low-Angle Jack, Bevel-Up Jointer. Also fits the Shooting Board Plane (25° bevel).
from £54.45 inc VAT

Veritas Depth Stop Upgrade for Small Plow Plane
Veritas Depth Stop Upgrade for Small Plow Plane
In 2016, we made a design change to the clamp mechanism to grip the depth stop shaft with more force, reducing the chance of inadvertently pushing the depth stop to a new position while the plane is in use. This change is completely compatible with planes purchased before February 26, 2016.
£2.75 inc VAT
Veritas Optional Depth Stop for Small Router Plane
Veritas Optional Depth Stop for Small Router Plane
This optional stainless-steel depth stop is for use with the Veritas Small Router Plane. To limit cutting depth to a preset maximum, the stop clamps onto the blade shaft. Made in Canada.
£7.95 inc VAT

Veritas Universal Variable Angle Plane FenceVeritas Universal Variable Angle Plane Fence
Veritas Universal Variable Angle Plane Fence
Designed to fit a wide array of bench planes, including those made by some other manufacturers, this variable angle fence can be used left or right. Not just for right angles, the fence allows you to plane accurate and consistent angles from 45° to 135°. Angles are set using a square or angle gauge, or directly on an angle you wish to match. A spring-loaded lever locks the fence and can...
£74.00 inc VAT
Blades for Veritas Low & Standard Angle Block PlaneBlades for Veritas Low & Standard Angle Block Plane
Blades for Veritas Low & Standard Angle Block Plane
Replacement blades for the Veritas Low & Standard angle block planes
from £38.50 inc VAT

Blades for Veritas DX60 Block Plane
Blades for Veritas DX60 Block Plane
PM-V11 replacement blade for the Veritas DX60 and NX60.
£52.25 inc VAT
Blade for Veritas Small Bevel-Up Bench Plane
Blade for Veritas Small Bevel-Up Bench Plane
Veritas 1¾" Blade - PM-V11 - 25° Bevel. Fits the Veritas Small Bevel-Up Bench Plane.
£50.75 inc VAT

Blades for the Veritas Low Angle Smoothing PlaneBlades for the Veritas Low Angle Smoothing Plane
Blades for the Veritas Low Angle Smoothing Plane
Veritas 2" Blade in PM-V11 to fit the Veritas Low-Angle Smoothing Plane
from £53.00 inc VAT
Veritas Chamfer Guide for Low-Angle Block Plane
Veritas Chamfer Guide for Low-Angle Block Plane
You can convert the Veritas Low-Angle Block Plane (05P22.01) and Standard Block Plane (05P22.30) into chamfer planes in seconds with this cunning guide. Easy to install - you first set the chamfer width on the guide, then install the guide by unscrewing the front knob of the plane, replacing the toe piece with the chamfer guide and tightening the knob again. It is ready to go. Adjustable for...
£32.95 inc VAT

Slow Adjuster for Veritas Bevel-Up Planes - Type A
Slow Adjuster for Veritas Bevel-Up Planes - Type A
The fine thread on this Norris-style adjuster slows blade advancement, making it easier to set blade projection precisely. An easy retrofit, it simply replaces the regular adjuster supplied with our bevel-up planes. Two versions are available. This type fits the bevel-up smoother, bevel-up jointer, low-angle jack, low-angle smooth and low-angle block planes. Made in Canada.
£22.75 inc VAT
Handles for Veritas Low-Angle Block PlaneHandles for Veritas Low-Angle Block Plane
Back In Stock
Handles for Veritas Low-Angle Block Plane
The bevel-up configuration of the Veritas low-angle block plane lets you vary the blade angle to suit the task, from low-angle blades for use on end grain to high-angle blades on figured wood. However, steeper cutting angles require more force to push the plane—a challenge for those with small hands or less strength. We offer inexpensive hardwood grips to adapt our low-angle block plane into...
from £21.90 inc VAT

Veritas Bevel-Up Jointer Fence
Veritas Bevel-Up Jointer Fence
The Veritas low-angle jointer fence enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer. The 11" long anodized aluminium fence can be attached to either side of the plane with the brass thumbscrews provided; a set screw can be adjusted to square the fence to the sole. As supplied, the 2" tall guiding face can be used to plane edges perfectly...
£44.50 inc VAT
Veritas Variable Angle Fence for Rebate PlanesVeritas Variable Angle Fence for Rebate Planes
Veritas Variable Angle Fence for Rebate Planes
This plane fence doesn't limit you to right angles - it allows accurate and consistent planing of any angle from 45° to 135°. Angles are set using a square or angle gauge, or directly on an angle you wish to match. The spring-loaded lever, which locks the fence, can be rotated out of the way if necessary. Through-holes in the 11" long aluminium fence allow the attachment of a wooden...
£78.50 inc VAT

Veritas Jointer Fence
Veritas Jointer Fence
Planing a square edge on a board requires a jointer fence, whether you are using an electric jointer or a hand plane. The Veritas® jointer fence allows you to shoot accurate and consistent square or bevelled edges with most* iron or steel bench planes. The integral rare-earth magnets make it quick and easy to attach or remove the 11" long anodized aluminium fence from either side of all sizes...
£59.00 inc VAT
Veritas Hand JointerVeritas Hand Jointer
Veritas Hand Jointer
The Veritas Hand Jointer allows you to accurately joint small parts by hand. Box-making and modelmaking often require small parts that are too dangerous to run through a power jointer and difficult to joint with a hand plane; balancing a plane on pieces much smaller than its sole can be awkward. This hand jointing accessory for Veritas medium and large shoulder planes lets you bring the work...
£58.75 inc VAT

Replacement Blade for the Veritas Cabinet Scraper
Replacement Blade for the Veritas Cabinet Scraper
This 2 3/4" wide replacement blade, for use with the Veritas Cabinet Scraper (05P3205) and Veritas String Inlay Scraper (05P3210), has two edges ground at 45° so that the blade can be flipped over, reducing the frequency of sharpening sessions.
£17.50 inc VAT
Veritas Fence for Large Router Plane
Veritas Fence for Large Router Plane
A very popular addition to the Veritas large router plane. Can be positioned on either side of the plane and will work on both straight and curved pieces.
£27.50 inc VAT

Veritas Narrow Router Plane BladesVeritas Narrow Router Plane Blades
Back In Stock
Veritas Narrow Router Plane Blades
These high-carbon steel router plane blades fit the Veritas large and merdium router planes, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in both metric and imperial sizes. Please note that Veritas do not produce a 3mm and a 1/8" blade, they consider them close enough in size so we only advertise the 1/8". Sizes...
from £19.00 inc VAT
Veritas Wide Router Plane BladesVeritas Wide Router Plane Blades
Back In Stock
Veritas Wide Router Plane Blades
These high-carbon steel router plane blades will fit the Veritas large and medium router planes, and the the Veritas hinge mortise plane, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in five Imperial sizes The 1/2" blades have a two-piece design and are available in two styles: straight and spear-point (for final...
from £6.55 inc VAT

Replacement 1/4' Blade for Veritas Small Router
Replacement 1/4' Blade for Veritas Small Router
Veritas Replacement 1/4" wide high-carbon steel blade for the . Made in Canada.
£11.95 inc VAT
Veritas Inlay Cutter Head for Router PlaneVeritas Inlay Cutter Head for Router Plane
Veritas Inlay Cutter Head for Router Plane
This simple attachment for a lets you score a shallow groove to accept inlaid purfling, banding or stringing, taking advantage of the plane’s fence and depth-adjustment mechanism to precisely control groove position and depth. The cutter head holds a pair of included single-bevel slicing blades that score crisply defined groove outlines across, with or diagonal to the grain. By using a chisel...
£67.50 inc VAT

Veritas Plane ScrewdriverVeritas Plane Screwdriver
Veritas Plane Screwdriver
A regular screwdriver just doesn't work well on cap iron screws. A narrow blade can mar the cap-screw slot, and there's always the risk that the screwdriver tip will slip out of the slot altogether. Veritas have designed this screwdriver to make it both safe and easy to remove, replace or adjust cap irons. It has a turned brass collar surrounding the tip to capture the head of a cap iron screw...

5

£27.50 inc VAT
Veritas Wile Plane HammerVeritas Wile Plane Hammer
Veritas Wile Plane Hammer
Making fine adjustments to plane-blade position is easier with the right tool, and few can compare to the finely made plane hammers of Richard Wile, a hobbyist woodworker from Nova Scotia. Based on Wile's design, this hammer is machined in our shop to have the same elegant proportions as the original, giving it a weight and balance that feel right in the hand. The small brass head, only 5/8"...
£48.00 inc VAT

Veritas Shooting BoardVeritas Shooting Board
Back In Stock
Veritas Shooting Board
The 24" long shooting track fits the Veritas shooting plane. This is a shooting board that doesn’t limit you to one angle, the fence is adjustable to let you shoot up to 60° from square. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly set the fence for square angles as well as miter cuts to produce frames with ten,...
£279.00 inc VAT
Veritas Shooting Board Fence
Veritas Shooting Board Fence
The Veritas Shooting Board Fence Kit lets you construct a shooting board that doesn’t limit you to one angle – the fence is adjustable to let you easily shoot mitres of various angles. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly adjust the fence to shoot square angles as well as mitres for frames with ten, eight,...
£129.00 inc VAT

Veritas Shooting Board TrackVeritas Shooting Board Track
Veritas Shooting Board Track
These are straight, durable aluminium tracks for making your own shooting board. They are designed to fit the Veritas Shooting Plane, and any other plane with a running surface between 2-1/32" and 2-1/4" wide; you can adjust the stainless-steel outer rail for a perfect fit. Set screws keep the rail from shifting in use. The inner rail is 11/64" tall. Low-friction UHMW strips in the...
from £58.00 inc VAT
Veritas Small Plough Plane Conversion KitVeritas Small Plough Plane Conversion Kit
Veritas Small Plough Plane Conversion Kit
An excellent way to extend the functionality of the Veritas Small Plough Plane, this conversion kit allows the plane to accommodate our tongue-cutting blades as well as our straight blades over 3/8" wide. Designed to clamp and support both sides of the cutter to prevent twisting in use, the kit is composed of a 5" long machined ductile iron skate with a brass locking knob and a parallel adjustment...
£56.50 inc VAT

Veritas Combination Plane Box
Veritas Combination Plane Box
This storage box provides a place to keep the assembled plane, the second pair of fence rods and up to two of the blade boxes. Slots in the sides of the box base act as rests for the fence rods, holding the plane upright. The top of the box fits into channels in the box base, locking the plane in position as well as securing other contents. Made in Canada from Baltic birch plywood, the box is...
£68.00 inc VAT
Veritas Blade Storage BoxVeritas Blade Storage Box
Veritas Blade Storage Box
This blade box holds the blades for the combination plane or small plow plane, displaying them edge up so you can easily pick the one you need. Made of Baltic birch plywood, it holds blades side by side in two 6" long rows. Because the width of the blades determines how many fit in the box, the number of blades you can store depends on which blades you own. However, all the new blades for the combination...
£25.50 inc VAT

Veritas Beading Blades for Combination & Small Plough PlanesVeritas Beading Blades for Combination & Small Plough Planes
Veritas Beading Blades for Combination & Small Plough Planes
All blades are made from PM-V11® tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane. These blades let you use the small plow plane to create decorative beading on workpieces. The blades are available in 1/8", 3/16" and 1/4" bead diameters. A 1/16" groove is cut on either side of the bead.
from £25.75 inc VAT
Veritas Reeding Blades for Combination PlaneVeritas Reeding Blades for Combination Plane
Veritas Reeding Blades for Combination Plane
For use with the combination plane only, these PM-V11 steel reeding blades are available in two-, three- and four-reed versions, with 1/8", 3/16" or 1/4" diameter reeds. A 1/16" groove (also known as a quirk) is cut on either side of each reed. Made in Canada.
from £23.68 inc VAT
Page: 1 | 2 |