Old Stock Hock Block Plane Blade 1-5/8''
Old stock BLA162 A2 Cryo blade. Comes in original paper packaging. Never been used or sharpened.
1 5/8'' wide with a 7/16'' centre slot.
From David Charleworth's Workshop.
Old Stock Hock Block Plane Blade 1-5/8''
Old stock BWA162 A2 Cryo blade. Comes in original paper packaging. Never been used or sharpened.
1 5/8'' wide with a 5/8'' centre slot.
From David Charleworth's Workshop.
Unmarked 1 3/8' Block Plane Blade
Two available. Came from the workshop of David Charlesworth.
0.128'' (3.26mm) thick.
1 3/8" (35mm) wide.
Centre hole 0.450'' (11.4mm) wide.
Unsure of the blade material.
Unused. No packaging.
I'm sorry but we do not have Rockwell measurements.
Unmarked 2' Blade
A 2" blade from David Charleworth's Workshop.
0.11'' (2.9mm) thick.
Unsure of the blade material.
It has been sharpened with a slight camber, but has seen very little use. No packaging.
Scratched into blade you can see ''L-N DLC C40 F34, 15° 90, 20° 68mm''.
I'm sorry but we do not have Rockwell measurements.
Japanese Bench Chisel - 6mm
These came from David Charlesworth's workshop and were for sale by DC to his students.
They are new unused stock.
6mm wide
Steel hooped, oak handles.
Japanese Bench Chisel - 9mm
These came from David Charlesworth's workshop and were for sale by DC to his students.
They are new unused stock.
9mm wide
Steel hooped, oak handles.
Japanese Mortise Chisel - 6mm (Red Oak handle)
Unused. From David Charlesworth's workshop.
220mm overall. Steel hoop. Red oak handle.
Japanese Paring Gouge
Shallow paring gouge 12mm wide with white oak handle.
This gouge is 390mm overall and appears to be unused.
Unidentified makers stamp.
This is from David Charlesworts teaching workshop.
It equates closely to a sweep 3 gouge, so pretty shallow (sweep one being flat & sweep 10 being much like a semi circle).
Tormek SB-250 Blackstone Silicon Sharpening Wheel
We don't think this has been used much but it is a pre-owned item (by David Charlesworth no less as it came from his workshop).
These currently retail at £167.50 and you can read the full descriptive blurb here...
Instruction included. Original packaging.
Karl Holtey Stanley 1 5/8' Block Plane Blade
From David Charleworth's Workshop.
Karl Holtey block plane blade to fit a Stanley or Record Block Plane.
0.11'' (2.9mm) thick. 1 5/8'' wide.
9/16'' (15mm) wide slot.
A2 steel.
I'm sorry but we do not have Rockwell measurements. Karl supplied these to David nearly 20 years ago, and these are unused and still in original packaging.
Karl Holtey Stanley 60 1/2 Blade
From David Charleworth's Workshop.
Karl Holtey block plane blade to fit a Stanley 60 1/2.
0.11'' (2.9mm) thick. 1 3/8'' wide.
9/16'' (15mm) wide slot.
A2 steel.
I'm sorry but we do not have Rockwell measurements. Karl supplied these to David nearly 20 years ago, and these are unused and still in original packaging.