Bad Axe 12" StilettoBad Axe 12" Stiletto
Bad Axe 12" Stiletto
The Bad Axe Stiletto is a dedicated dovetail saw. You might think you need a short 8" dovetail saw to cut your finest pins, but actually the Stiletto at 12" will make for longer (and therefore fewer) cuts, which promotes more accuracy. The extra length is balanced beautifully by a shallow blade so it feels right in the hand. Bad Axe Tool Works takes the finest materials and pairs it with...
£287.00 inc VAT
Rob Cosman 3/4 Dovetail SawRob Cosman 3/4 Dovetail Saw
Rob Cosman 3/4 Dovetail Saw
Cutting tiny dovetails (dovetails in 3/8 inch and less thick stock) is a bit challenging if using Rob's regular sized dovetail saw - it can be done, but I wanted a better saw for this application. That is why he designed his 3/4 dovetail saw. As compared to Rob's regular-sized dovetail saw, the 3/4 dovetail saw's thinner saw plate, smaller teeth, shallower depth of cut, and shorter overall...
£255.00 inc VAT

Lie-Nielsen Dovetail Saw with Cherry Handle
Lie-Nielsen Dovetail Saw with Cherry Handle
Lie-Nielsen believe that their Back Saws are the finest made anywhere. They are an exact copy of a British saw made in 1830. Owning one is like having a piece of woodworking history in your shop. Since dovetailing is a ripping operation, where the kerf is running with the grain, the Lie-Nielsen Dovetail Saw has its teeth filed to a rip profile, unlike other dovetail saws on the market today. Solid...
£185.00 inc VAT
Lie-Nielsen Tapered Dovetail Saw with Cherry Handle
Lie-Nielsen Tapered Dovetail Saw with Cherry Handle
Lie-Nielsen have redesigned their three most popular back saws to feature a slight tapering of the blade from toe to heel. This taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line. In addition, the taper introduces an angled approach to your...
£185.00 inc VAT

Veritas Dovetail SawVeritas Dovetail Saw
Veritas Dovetail Saw
When we first saw this saw (!) we were a bit dubious but it has quickly grown on us. It is very comfortable. it is very affordable, it cuts well and can be re-sharpened. Not for the purists maybe but beauty is in the eye of the beholder. This is what those clever chaps from Veritas say about this saw.... The Veritas dovetail saw is an innovative blend of tradition and technology. It incorporates...
£86.50 inc VAT
Veritas Fine Cut Dovetail Saw (20tpi)
Veritas Fine Cut Dovetail Saw (20tpi)
The Veritas Fine Cut Dovetail Saw (20tpi) is best for stock of less than half an inch thick, this finer version of the standard Dovetail saw would complement your existing saw armoury. The Veritas dovetail saws are an innovative blend of tradition and technology, incorporating the critical characteristics of a classic fine joinery saw but made using modern production processes and state-of-the-art...
£89.95 inc VAT

Rob Cosman Dovetail Saw - Ebony Resin HandleRob Cosman Dovetail Saw - Ebony Resin Handle
Rob Cosman Dovetail Saw - Ebony Resin Handle
Rob describes the first of his hand saw offerings, the dovetail saw. After teaching thousands of folks to cut dovetails by hand, Rob has tailored a saw to address the most common problems. With the intent to enable woodworkers to assemble their dovetails straight from the saw this may very well be the missing link! Unique features include: Split lines with the Super Fine 22tpi starting tip,...
£265.00 inc VAT
Thomas Flinn Pax 1776 Dovetail Saw
Back In Stock
Thomas Flinn Pax 1776 Dovetail Saw
Available in lengths 8", 10" and 12" with 20tpi, in Rip (for cutting with the grain). Blade depths are as follows: 8" Blade length = Blade depth 2" 10" Blade length = Blade depth 2" 12" Blade length = Blade depth 2 1/2" These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The dovetails saws are beautifuly...
from £172.00 inc VAT

Thomas Flinn Pax Beech Handled Dovetail & Tenon Saws
Thomas Flinn Pax Beech Handled Dovetail & Tenon Saws
The Pax range of saws are made by Thomas Flinn & Co in Sheffield, England. They perform like the 1776 premium range, just don't have all the refinery. So instead of an open Walnut handle, these saws have a closed handle made from steamed Beech with a two-tone gloss finish. They have the same heavy brass back which is folded to give the blade its tension. If you like a heavier saw, then this...
from £90.00 inc VAT
Veritas Small Crosscut SawVeritas Small Crosscut Saw
Veritas Small Crosscut Saw
Used for cutting across or perpendicular to the grain, the 16 tpi crosscut saw blade has teeth filed with alternating bevel angles so it severs rather than tears wood fibers; it tracks better and leaves a smoother finish than a rip-cut blade. The teeth are filed with 15° rake and bevel angles and have 0.003" of set per side.
£92.50 inc VAT