Sort By
Per Page
View
Grid
List
Veritas Saddle Square
Veritas Small Saddle Square - Transferring a line from one surface to another with a small square is not easy. Our saddle square allows you to scribe two perpendicular surfaces at one time. But, more importantly, it allows you to pick up on a line already scribed & accurately transfer it to another perpendicular face. With 1 1/4" (32mm) & 2 1/4" (57mm) inside legs, it can wrap a...
Veritas Set-Up Blocks - 9 Piece Metric Set
Setting up machines in the shop can be a frustrating and inaccurate undertaking. Tape measures and rulers are difficult to use when measuring gaps between curved bits and guide fences. Worse, machines often require two hands to adjust, leaving nothing to hold the measuring tool. The Veritas set-up blocks help solve this problem. Simply place the appropriate block or combination of blocks between the...
Veritas Shaft Clamp for Dual Marking Gauge
On occasions, it may an advantage to lock the relative position of the two rods on the Veritas® Dual Marking Gauge, such as when a project requires a constant mortise size, but different offsets. The shaft clamp lets you lock the relative position of the cutters while still being able to adjust the fence for offset. This allows you to preserve identical mortise or tenon sizing when joining parts...
Veritas Shop Marking Knife
The unique handle shape on this marking knife lets you use it comfortably with a pencil grip when fine control is needed, or a pistol grip that allows greater force to be applied for a more visible line.
The removable blade design lets you flip the blade for right-hand or left-hand use, or for flush registration on either side of a reference surface.
The blade, made of PM-V11 tool steel, is 3/32"...
Replacement PM-V11 Blade for the Veritas Shop Knife
Made of PM-V11 tool steel , this replacement blade for the Veritas Shop Knife is 3/32" thick and about 3/8" wide with a 55° spear-point tip. Ground to a keen edge at a 25° bevel angle.
Veritas Standard Marking Gauge
Standard Gauge - pretty much the same construction as the micro adjust but these are slighly shorter at 6" and do not have the micro adjust feature.
Veritas 24'' (610mm) Steel Straightedge
Shop accuracy begins with a benchmark straightedge as a surface reference. These Canadian-made Veritas precision steel straightedges are ground flat over the entire length on both edges to within 0.0010'' (0.0254mm). All have been stress relieved to remain true under temperature variation. Useful for checking whether surfaces are flat or straight, they are 1½'' (38mm) high and...
Veritas Thickness Calipers
Primarily used by turners, these Veritas thickness calipers can be fitted into virtually any shape of vase or bowl.
To use, open the caliper by just pulling the legs apart (having the spacing nut between the legs rather than outside them allows this), put in position and then set the spacing nut to the wall thickness. Open calipers, remove and measure tip gap.
The spacing nut can be adjusted...
Veritas Trammel Points
Usable on any rule up to 1/4" thick, these narrow-bodied trammels can be set to reproduce radii as little as 9/16". The removable points score clear lines on any wood, and are also effective on aluminium, brass, bronze and mild steel. With the points removed, the trammel bodies double as square gauges, clamping onto a square to make repetitive angle marking easy. Inspired by an antique trammel...
Veritas Transfer Log Scribe
Can be used with 2 pencils for double scribing and the hardened steel pin can be used on one leg for smooth scribing.
Fully adjustable from 0-300mm. Calibrated so that any opening can be used once the double bubbles are set for a given pencil & pin projection.
Curved pin tip has rounded end for smooth scribing and straight tip is sharp pointed for compass work.
Includes indelible pencil...
Veritas Pocket Layout Square - Set of 3 Metric
Just as a speed square is an essential layout tool for carpenters and framers, these small squares are similar in both form and function but are appropriately sized for laying out joinery and other common workshop tasks.
Available individually and as a set including 35mm, 60mm and 85mm squares – each a compact, lightweight tool that fits into a pocket, comes to hand nicely, and is easy to...