Sort By
Per Page
View
Grid
List
Tormek LA-124 Set of Optional Narrow Discs
For use with the Tormek Profiled Leather Honing Wheel LA-120. Includes two discs, one with a 2mm (3/32") radius and one with a 45° tip.
These smaller disc profiles permit the honing of small carving tools with very narrow profiles.
Tormek LA-220 Leather Honing Wheel
Gently removes the burr which develops during grinding and polishes the bevel. Fits Tormek T-8, Tormek T-7 and Tormek 2000.
It is used together with Tormek Honing Compound PA-70. To get the highest possible sharpness on your edge tool, you finish the sharpening process by honing your tool on the Leather Honing Wheel.
The leather on the Leather Honing Wheel is provided by the tannery Tärnsjö...
Tormek Leather Profiled Honing Wheel
With the profiled Tormek leather honing wheels LA-120 you can hone and polish the inside of turning gouges, carving gouges and V-tools. Fits all Tormek models.
You mount the extra wheels on the outer side of the standard honing wheel.
LA-120 is delivered with two standard discs. The first has a radius of 3mm (1/8") for gouges and the second has a 60° tip for v-tools.
It is used...
Tormek Machine Cover
The Tormek machine cover protects your machine from shavings and wood dust.
100% Cotton.
Breathable.
Fits all Tormek models.
Tormek MSK-200 Stainless Steel Shaft for T3/T4
Tormek Stainless steel main shaft with Ezylock nut in composite. The EzyLock ensures that the grindstone is held securely with no danger of unwinding. Unique design requires no tools to mount or loosen the grindstone.
With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation...
Tormek MSK-250 Stainless Steel Shaft for T7/T8
The Tormek MSK-250 stainless steel shaft, washer and EzyLock nut are all made of stainless steel. The EzyLock ensures that the grindstone is held securely with no danger of unwinding. Unique design requires no tools to mount or loosen the grindstone.
With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left...
Tormek Multi Jig
It is not without reason this Tormek jig is named "Multi Jig". It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat, which really makes it two jigs in one.
With SVS-50 you can sharpen square and skew turning chisels with straight or curved edges as well as parting tools, roughing gouges and gouges and chisels for woodcarving.
Tormek Planer/Jointer Blade Jig
With the Tormek Planer Blade Attachment SVH-320 you can sharpen HSS planer blades of any length. Also suitable for mitre guillotine blades.
With this jig you will always work with sharp planer blades. You do not need to interrupt your work to send them away for sharpening.
The jig copes with planer blades of any length. Blades longer than 270 mm (10½") are relocated in the blade holder and...
Tormek RB-180 Rotating Base
The Tormek RB-180 enables you to easily rotate the machine 180° and lock it with complete stability. You can alternate between sharpening and honing, or sharpening towards or away from the edge in seconds.
Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from the edge. With the Tormek Rotating Base RB-180, you can easily...
Tormek RM-533 Rubber Mat
With the Tormek Rubber Work Mat RM-533 you get a water proof yet non slip surface.
The raised rim will retain any water spillage, you get a convenient and tidy base for your sharpening system.
Size 533 × 343mm (21" × 13½").
Fits all Tormek models.
Tormek SB-250 Blackstone Silicon
Tormek Blackstone Silicon has been developed for shaping and sharpening* HSS and other exotic alloyed steels. It can also touch up tungsten carbide. It does not offer faster steel removal on ordinary carbon steel than the Tormek Original Grindstone.
The combination of abrasive hardness, shape and grain size is optimized to work efficiently at the Tormek system’s low RPM. Its faster material...
Tormek Scissors Jig
Give your scissors a bite on the Tormek with the SVX-150 jig. It fits all sorts of scissors from household scissors to heavy garden shears. You can also sharpen pinking scissors that make zigzag cuts in cloth as well as portable electrical hand planer blades.
The scissors are mounted in a holder, which supports freely on a support plate. The grinding angle can be set so that you exactly replicate...
Tormek SG-200 Original Grindstone
The Tormek Original Grindstone SG-200 is the smaller version of the SG-250 grindstone and has the same composition and qualities. It is delivered as standard with the Tormek T-4 machine model.
Read more about this unique grindstone and its features at the SG-250 Tormek Original Grindstone above.
Fits Tormek T-4 and previous Tormek models with a 200 mm stone diameter.
Tormek SG-250 Original Grindstone
The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life. SG-250 is delivered as standard with Tormek T-8.
The best all round grindstone
This grinding stone is the ideal choice when you want both efficient steel removal and a fine finish in the same stone over a wide variety of materials, from carbon...
Tormek Short Tool Jig
This little Tormek woodcarving jig is designed for sharpening short woodcarving tools and the shortest chisels. Suitable for straight shanked tools, such as wood chisels, carving gouges and tools for power carvers.
The jig has two parallel flanges running on both sides of the Universal Support which ensures that the jig at all times – even when rotated – holds the tool square to the...
Tormek SJ-200 Japanese Waterstone
This is the smaller version of the Tormek Japanese Waterstone suitable for the T-4 machine.
The Tormek Japanese Waterstone 4000 grit delivers a mirror finish with hardly any visible marks. Since the stone is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping* a tool.
This waterstone excels at sharpening hand tools like carving tools, knives,...
Tormek SJ-250 Japanese Waterstone
The Tormek Japanese Waterstone 4000 grit delivers a mirror finish with hardly any visible marks. Since the stone is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping* a tool.
This waterstone excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels where a minimum of steel removal is needed and a superior...
Tormek Small Knife Holder
The Tormek Small Knife Holder SVM-00 opens up the possibility to sharpen those really small knife blades, which up until now have been difficult to sharpen.
Normally small knives have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle.
The holder works together with the Tormek Knife Jig SVM-45.
You can sharpen...
Tormek Square Edge Jig
With the Tormek SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape.
The SE-77 Square Edge Jig is a further development of the SE-76 jig. It has been provided with an...
Tormek Stone Grader
With the Tormek Stone Grader SP-650 you can change the grit size of the Tormek original grindstone to give a finer sharpening surface. The other side of the Stone grader is used to maintain the grindstone, bringing new abrasive grains to the surface for an effective sharpening.
The Tormek Original Grindstone is designed so that it can be treated with the Stone Grader to change its quality from fast...
Tormek T8-00 Storage Tray
The Tormek T8-00 Storage Tray stores all the accessories included with the Tormek T-8. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
WM-200 AngleMaster
HB-10...
Tormek TC-800 Case
The Tormek Case keeps your jigs and accessories organized and is easy to carry thanks to the premium leather handle. The case is made of high-quality materials with a slidable lid that keeps everything in place.
These cases are stackable for easy storage and compatible with the new storage trays HTK-00, TNT-00 and T8-00. The storage trays are redesigned and made of EPP, a permanent construction...
Tormek TNT-00 Storage Tray
The Tormek TNT-00 Storage Tray stores all the jigs included with their Woodturner's Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
TNT-300 Woodturner's...
Tormek Turning Tool Setter
The Tormek Turning Tool Setter TTS-100 is the key to an efficient sharpening of woodturning gouges and skews. It enables you to exactly create and replicate the edge angle on your bowl and spindle gouges as well as on your flat or oval skews with either a straight or a curved edge.
TTS-100 works in conjunction with the Gouge Jig SVD-186 and the Multi Jig SVS-50.
By knowing your exact profiles,...
Tormek US-105 Universal Support with Micro Adjust
The Tormek Universal Support is the basis for all Tormek jigs. US-105 has a square cut Acme style thread which prevents damage by the locking screws and a Micro Adjust with scale for precise setting of the edge angle and cutting depth.
Fits Tormek T-8, Tormek T-7 and Tormek 2000.
The versatile Tormek Universal Support is the basis of the Tormek system. It is made of 12mm (approx. ½")...
Tormek US-430 Extended Universal Support with Micro Adjust
The Tormek Extended Universal Support for sharpening long tools, such as long knives, cleavers and machetes. Micro adjust with scale for precise setting of edge angle and cutting depth.
Fits Tormek T-8, Tormek T-7 and Tormek 2000.
Length: 436mm. Height: 212mm.
Can be placed in these positions:
- Vertically for sharpening towards the edge.
- Horizontally for sharpening with the edge.
-...
Tormek Woodturners Kit
The Tormek Woodturners kit contains everything you need to shape and sharpen all your turning tools, including two patented jigs (works like three!), a radiused leather honing wheel, a serious instruction, the appreciated Turning Tool Setter and the Tormek Case to store all your jigs.
The jigs are packed in TC-800 Tormek Case with the included TNT-00 Storage Tray. The Tormek Case keeps your jigs...
Tormek XB-100 Horizontal Base
The Tormek XB-100 Horizontal Base is an upgrade for earlier Tormek machine models. With the Horizontal Base you can move the Universal Support from vertical mount (for grinding towards the edge) to horizontal mount for grinding away from edge.
Vallorbe Triangular Saw Files
To choose the right file, size it to the tooth. Ideally, about half of the cutting surface of the file will be in contact with the tooth -- half of the file will be in the gullet and the other half unused. When you rotate the file to get a fresh edge, it will be uniformly sharp. If you use a smaller file, only some of the new surface will be fresh and the rest dull.
Veritas Saw File Holder
Not only does this Veritas Saw File Holder provide a secondary grip for your saw file, it also helps you control the angle of the file as you sharpen, using the eye's natural ability to judge parallel and level.
It has a rotating collar for setting a positive or negative rake angle up to 30°, and a 3" wide protractor to set the fleam (or bevel) angle up to 45° left or right. All you need to...
Grobet Auger Bit File
Auger bit files are double ended, with one end having teeth cut along the face with uncut edges, and the other with teeth cut along the edge and uncut faces.
This version, made by Grobet in Italy is very nicely made, with each end of the file tapered in two dimensions, and a finely shaped centre section to grip when working.
Length 7'' - Steel (8oz)
Made in Italy by Grobet
A Sharpening Handbook
by Richard D. Wile
There are many books available on sharpening, however as Richard Wile points out, “sharpening has evolved.” He has directed his book towards the novice to intermediate sharpener, with the aim of enhancing their experience with advice on guides, new and traditional media, and techniques.
Techniques cover the primary hand tools in most woodworkers’ workshops...
Sharp
Sharpening for all - green woodwork, workshops, bushcraft, gardening, carepentry, forestry, builders, cooking and craft
Sharp is a book that will guide the reader through the principles and practice of sharpening.
From definitions and requirements in the chapter 'What is Sharp?' and through chapters explaining edge geometry, how to observe the edge to determine correct sharpening procedures required,...