Sort By
Per Page
View
Grid
List
Robert Sorby ProEdge Zirconium Belts
Designed for HSS tools, drill and router bits this material provides good value.
The 60 grit belt will tackle the most damaged surface. Use the 120 grit to provide a rewarding cutting edge and finish.
Robert Sorby Short Tool Platform with Arm
Increases access when tools are getting old and worn.
Robert Sorby Standard Gouge Jig
Allows easy sharpening of all standard ground woodworking gouges.
Robert Sorby Woodworkers' Square Guide
This simple to use jig has been designed as an upgrade to the current woodworking chisel jig (PESQ). This jig can be adjusted to ensure exact and repeatable 90 degree angles can be achieved every time. A stepped plate raises the tool to be sharpened away from the tool platform.
Ideal for sharpening chisels and plane irons.
Robert Sorby Woodworking Chisel Jig
Accurately ensures a straight cutting edge on any woodworking chisel.
Tormek Adjustable Tool Rest
With the Tormek Adjustable Tool Rest you get an extended support surface from the Universal Support. It is ideal for sharpening turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. You can also use it for cabinet scrapers and hollowing tools.
It has a generous surface, 90 × 110mm, which permits a safe and steady positioning of the tool towards the stone.
The...
Tormek AngleMaster
The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool.
The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone diameter from 250 mm or 10" down to 150 mm or 6", so you can achieve an exact setting even as the stone wears.
Tormek Anti-Corrosion Concentrate (2 Pack)
The Tormek Anti-Corrosion Concentrate makes water non-corrosive. Always use with Tormek diamond wheels. It can also be used with grindstones.
Add 10ml concentrate to 250ml water (~4%). Scale for correct dilution. Mix Anti-Corrosion Concentrate and water before adding to water trough. If you want to save the mix overnight, remember to lower the water trough. Does not contain anti-freeze.
Each...
Tormek AWT-250 Advanced Water Trough
The Tormek Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools.
Magnet Cleans the Stone
The water trough incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone...
Tormek Axe Jig
With the Tormek Axe Jig SVA-170 you will be surprised to see how sharp you can get an axe. The jig firmly supports the axe, and enable you to sharpen it with a constant edge angle.
Tormek Bench Grinder Kit
A package deal comprising the Tormek BGM-100, Tormek SVS-50 Multi-Jig, Tormek TTS-100 Turning Tool Setter and the Tormek SVD-186 Turning Tool Jig.
Tormek BGM-100
With the BGM-100 you can use Tormek jigs and setting devices on your bench grinder, giving you perfect control. The chosen shape and edge angle are precisely repeatable. The BGM-100 also allows the use of other Tormek woodturner's...
Tormek Bench Grinder Mounting Set
If you need to remove a lot of steel to create a desired shape on a new tool, this Tormek Bench Grinder Mounting Set BGM-100 enables you to use the Tormek woodturning jigs also on your bench grinder.
Take control of your profiles
No matter which grinding machine you use, the most difficult part in sharpening woodturning tools is to exactly replicate the shape and the edge angle.
With the BGM-100...
Tormek CW-220 Composite Honing Wheel
The Tormek Composite Honing Wheel has integrated polish to remove the burr and is easy to use. This wheel fits Tormek T-8, Tormek T-7 and Tormek 2000.
The Composite Honing Wheel is suitable to use in clean environments since there's no need to add honing compound.
Tip when honing Moisten the composite honing wheel with some water for smoother honing. Use a sponge or cloth.
Tormek DC-200 Diamond Wheel Coarse 360G
The Tormek Diamond Wheel Coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate. Always use the concentrate in the water when sharpening...
Tormek DC-250 Diamond Wheel Coarse 360G
The Tormek Diamond Wheel Coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate. Always use the concentrate...
Tormek DE-200 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
Tormek DE-250 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter.
Included with every diamond wheel is a bottle of Tormek...
Tormek DF-200 Diamond Wheel Fine 600G
The Tormek Diamond Wheel Fine with a grit size of 600 is the ultimate all round wheel combining efficient steel removal with smooth surface finish which makes it the perfect versatile wheel.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
Tormek DF-250 Diamond Wheel Fine 600G
The Tormek Diamond Wheel Fine with a grit size of 600 is the ultimate all round wheel combining efficient steel removal with smooth surface finish which makes it the perfect versatile wheel.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter.
Included with every diamond wheel is a bottle of Tormek...
Tormek Diamond Stone Truing Tool
If your grindstone has become uneven, it is easily fixed with the Tormek Diamond Truing and Dressing Tool TT-50. It will make your stone perfectly round and flat again.
Easy feeding across the stone
You conveniently feed the diamond cutter across the stone by alternately turning the two knobs with both your hands. Thanks to the controlled feed, you get an even and flat stone surface with no ridges.
Controlled...
Tormek Drill Bit Sharpener
With the Tormek Drill Bits Sharpening Attachment you can now sharpen your drill bits (3-22mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape.
Tormek Gouge Jig
With the Tormek gouge jig SVD-186 R you can easily sharpen your fingernail shaped woodturning gouges to a razor sharpness. The high level of control enables you to exactly replicate your chosen profile.
With this gouge sharpening jig you can also sharpen woodcarving tools with complex shapes such as curved or bent carving gouges and V-tools.
Redesigned version 2020
New locking screw to lock...
Tormek Hand Tool Kit
This Tormek Hand Tool kit includes all the jigs you need for sharpening your knives, scissors, draw knives, small knives, flexible knives and axes as well as short chisel and carving tools. The perfect kit to sharpen all your hand tools.
The jigs are packed in a TC-800 Tormek Case with the included HTK-00 Storage Tray. The Tormek Case keeps your jigs and accessories organized and is easy to carry...
Tormek Handbook
The Tormek handbook is included with each machine. It gives you the basics of sharpening and different techniques as well as user instructions and valuable tips for each jig and how to sharpen specific tools.
More than 600 detailed line drawings show, step by step, how best to sharpen most type of edge tools with the unique Tormek method. The updated design with wire-o-binding and plastic cover...
Tormek HTK-00 Storage Tray
The Tormek HTK-00 Storage Tray stores all the jigs included with their Hand Tool Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
SVM-45 Knife Jig
SVM-140...
Tormek Knife Profile Jig
The Tormek Knife Profile Jig SVP-80 sharpens all makes and shapes of moulding knifes with 24, 30 or 36 mm distance between the hole-centres.
Since you sharpen the flat back surface of the knife, you can use the jig regardless of the profile. Max width 100 mm. Also for profiled paint removal blades.
Tormek LA-120 Jig Shaft
Replacement shaft for the LA-120 Profiled Honing Wheel
Tormek LA-124 Set of Optional Narrow Discs
For use with the Tormek Profiled Leather Honing Wheel LA-120. Includes two discs, one with a 2mm (3/32") radius and one with a 45° tip.
These smaller disc profiles permit the honing of small carving tools with very narrow profiles.
Tormek LA-220 Leather Honing Wheel
Gently removes the burr which develops during grinding and polishes the bevel. Fits Tormek T-8, Tormek T-7 and Tormek 2000.
It is used together with Tormek Honing Compound PA-70. To get the highest possible sharpness on your edge tool, you finish the sharpening process by honing your tool on the Leather Honing Wheel.
The leather on the Leather Honing Wheel is provided by the tannery Tärnsjö...
Tormek Leather Profiled Honing Wheel
With the profiled Tormek leather honing wheels LA-120 you can hone and polish the inside of turning gouges, carving gouges and V-tools. Fits all Tormek models.
You mount the extra wheels on the outer side of the standard honing wheel.
LA-120 is delivered with two standard discs. The first has a radius of 3mm (1/8") for gouges and the second has a 60° tip for v-tools.
It is used...
Tormek Machine Cover
The Tormek machine cover protects your machine from shavings and wood dust.
100% Cotton.
Breathable.
Fits all Tormek models.
Tormek MSK-200 Stainless Steel Shaft for T3/T4
Tormek Stainless steel main shaft with Ezylock nut in composite. The EzyLock ensures that the grindstone is held securely with no danger of unwinding. Unique design requires no tools to mount or loosen the grindstone.
With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation...
Tormek MSK-250 Stainless Steel Shaft for T7/T8
The Tormek MSK-250 stainless steel shaft, washer and EzyLock nut are all made of stainless steel. The EzyLock ensures that the grindstone is held securely with no danger of unwinding. Unique design requires no tools to mount or loosen the grindstone.
With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left...
Tormek Multi Jig
It is not without reason this Tormek jig is named "Multi Jig". It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat, which really makes it two jigs in one.
With SVS-50 you can sharpen square and skew turning chisels with straight or curved edges as well as parting tools, roughing gouges and gouges and chisels for woodcarving.
Tormek Planer/Jointer Blade Jig
With the Tormek Planer Blade Attachment SVH-320 you can sharpen HSS planer blades of any length. Also suitable for mitre guillotine blades.
With this jig you will always work with sharp planer blades. You do not need to interrupt your work to send them away for sharpening.
The jig copes with planer blades of any length. Blades longer than 270 mm (10½") are relocated in the blade holder and...
Tormek RB-180 Rotating Base
The Tormek RB-180 enables you to easily rotate the machine 180° and lock it with complete stability. You can alternate between sharpening and honing, or sharpening towards or away from the edge in seconds.
Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from the edge. With the Tormek Rotating Base RB-180, you can easily...
Tormek RM-533 Rubber Mat
With the Tormek Rubber Work Mat RM-533 you get a water proof yet non slip surface.
The raised rim will retain any water spillage, you get a convenient and tidy base for your sharpening system.
Size 533 × 343mm (21" × 13½").
Fits all Tormek models.
Tormek SB-250 Blackstone Silicon
Tormek Blackstone Silicon has been developed for shaping and sharpening* HSS and other exotic alloyed steels. It can also touch up tungsten carbide. It does not offer faster steel removal on ordinary carbon steel than the Tormek Original Grindstone.
The combination of abrasive hardness, shape and grain size is optimized to work efficiently at the Tormek system’s low RPM. Its faster material...
Tormek Scissors Jig
Give your scissors a bite on the Tormek with the SVX-150 jig. It fits all sorts of scissors from household scissors to heavy garden shears. You can also sharpen pinking scissors that make zigzag cuts in cloth as well as portable electrical hand planer blades.
The scissors are mounted in a holder, which supports freely on a support plate. The grinding angle can be set so that you exactly replicate...
Tormek SG-200 Original Grindstone
The Tormek Original Grindstone SG-200 is the smaller version of the SG-250 grindstone and has the same composition and qualities. It is delivered as standard with the Tormek T-4 machine model.
Read more about this unique grindstone and its features at the SG-250 Tormek Original Grindstone above.
Fits Tormek T-4 and previous Tormek models with a 200 mm stone diameter.
Tormek SG-250 Original Grindstone
The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life. SG-250 is delivered as standard with Tormek T-8.
The best all round grindstone
This grinding stone is the ideal choice when you want both efficient steel removal and a fine finish in the same stone over a wide variety of materials, from carbon...
Tormek Short Tool Jig
This little Tormek woodcarving jig is designed for sharpening short woodcarving tools and the shortest chisels. Suitable for straight shanked tools, such as wood chisels, carving gouges and tools for power carvers.
The jig has two parallel flanges running on both sides of the Universal Support which ensures that the jig at all times – even when rotated – holds the tool square to the...
Tormek SJ-200 Japanese Waterstone
This is the smaller version of the Tormek Japanese Waterstone suitable for the T-4 machine.
The Tormek Japanese Waterstone 4000 grit delivers a mirror finish with hardly any visible marks. Since the stone is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping* a tool.
This waterstone excels at sharpening hand tools like carving tools, knives,...
Tormek SJ-250 Japanese Waterstone
The Tormek Japanese Waterstone 4000 grit delivers a mirror finish with hardly any visible marks. Since the stone is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping* a tool.
This waterstone excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels where a minimum of steel removal is needed and a superior...
Tormek Small Knife Holder
The Tormek Small Knife Holder SVM-00 opens up the possibility to sharpen those really small knife blades, which up until now have been difficult to sharpen.
Normally small knives have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle.
The holder works together with the Tormek Knife Jig SVM-45.
You can sharpen...
Tormek Square Edge Jig
With the Tormek SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape.
The SE-77 Square Edge Jig is a further development of the SE-76 jig. It has been provided with an...
Tormek Stone Grader
With the Tormek Stone Grader SP-650 you can change the grit size of the Tormek original grindstone to give a finer sharpening surface. The other side of the Stone grader is used to maintain the grindstone, bringing new abrasive grains to the surface for an effective sharpening.
The Tormek Original Grindstone is designed so that it can be treated with the Stone Grader to change its quality from fast...
Tormek T8-00 Storage Tray
The Tormek T8-00 Storage Tray stores all the accessories included with the Tormek T-8. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
WM-200 AngleMaster
HB-10...