Sort By
Per Page
View
Grid
List
Crown Tools Mini & Midi Revolution
If you already use the Revolution Hollowing System from Crown Tools you will also want this tool for your small hollow forms and pots.
An ideal tool for beginners, whether cutting aggressively or with finesse. As with all Crown Tools, you get good value - the kits comprise of the tool with adjustable Super Ring, a REV13 cuttter and 2 hex keys.
Also includes instructions and a video link are...
Crown Tools Revolution 10'' Handle Extension
Crown Tools Revolution 10'' Handle Extension
Crown Tools Revolution 14'' Long Hollower with 2 Blades
The 14'' Long Hollower is one of the extras offered by Crown Tools for the Revolution Hollowing System.
A 3/4'' shaft machined down to 5/8'' to fit directly into the handle.
Supplied with Brass Clamp and 2 Long Hollower blades.
Crown Tools Revolution Bowl Gouge
Bowl Gouges to use with the Crown Tools Revolution Hollowing System are available in two sizes:
3/8'' (10mm) and 1/2'' (13mm)
Crown Tools Revolution Brass Clamp Kit
Crown Tools Revolution Brass Clamp Kit includes Extender and two Long Hollower (REV16) blades.
Crown Tools Revolution Brass Collet
Crown Tools Revolution Brass Collet available in 2 sizes 3/8'' (10mm) and 1/2'' (13mm)
Crown Tools Revolution Carbide Cutter (8mm) incl Extender & Key
Crown Tools Revolution Carbide Cutter (8mm) incl Extender & Key
Crown Tools Revolution Complete
Dave Bates (of Stiles & Bates) has described this system as one of the best systems on the market and is part of his own tool rack, which is a recommendation in itself.
Crown Tools Revolution Heart Cutter
Crown Tools Revolution Heart Cutter available in large and small.
Crown Tools Revolution Indexing Tool
Crown Tools Revolution Indexing Tool is used with the Texturing Tool.
Crown Tools Revolution Key Cutter
Crown Tools Revolution Key Cutter available in long and short.
Crown Tools Revolution Replacement Blades for Long Hollower
Set of 2 Long Hollower blades for the Crown Tools Revolution Hollowing System
Crown Tools Revolution Replacement Brass Cutter Holder
Brass Cutter Holder for use with Revolution Hollowing System
Crown Tools Revolution Shaft 1/2''
Crown Tools Revolution 1/2'' shaft only
Crown Tools Revolution Spindle Gouge
Spindle Gouges to use with the Crown Tools Revolution Hollowing System are available in two sizes:
3/8'' (10mm) and 1/2'' (13mm)
Crown Tools Revolution Spiralling Wheel
Crown Tools Revolution Spiralling Wheel available in 18 and 30 tooth.
Crown Tools Revolution Super Ring
Replacement Super Ring cutter for Revolution Hollowing System.
Crown Tools Revolution Swan Neck and Egg Scraper
A 12'' Swan Neck for use with Revolution Hollowing Sytem supplied with Egg Scraper (REV13), 1/2'' diamter shaft.
Crown Tools Revolution Texturing Tool
The Crown Tools Revolution Texturing Tool fits directly into the 1/2'' (13mm) collet of the Revolution Handle and is supplied with a 18 tooth texturing wheel.
The blade has an indexing line scribed down the centre to allow the use of Crown Tools Indexing Tool. Adding the Indexing Tool with the appropriate Spiralling Wheels available offers full spiralling capabilities.
Hamlet Big Brother
Hamlet Big Brother is the complete set consisting of Multi Handle (26''), 1/2'' cutter, edge protector and a 5/8'' straight stem.
Does not include reducing collets, side handle or hollowing gate, but these are available separately.
Hamlet Multi-Tip Scraper & Cutters
This versatile tool from Hamlet comes with three inter-changeable tips, which can be oriented to any position to give the most suitable angle of presentation to the work.
The three tips/cutters are round, pear and square in shape.
Handle is 10'' in length
Robert Sorby SteadyPro Turning System
The Robert Sorby SteadyPro is a very easy to use jig that provides additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system.
With the easy to adjust cantilever action of the clamping rollers, this ensures the optimum control for a large...
Robert Sorby SteadyPro Turning System - With Stem
The Robert Sorby SteadyPro is a very easy to use jig that provides additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system.
With the easy to adjust cantilever action of the clamping rollers, this ensures the optimum control for a large...
Hamlet Little Brother
The Hamlet Little Brother has the same set-up as its Big Brother. So it has the same 1/2" cutter and edge protector. The difference is that the Small Brother has a smaller (17") handle and the 5/8" stem is tapered.
Does not include reducing collets, side handle or hollowing gate, but these are available separately.
Hamlet Big / Little Brother Cutter
1x replacement cutter that fits the Hamlet Big and Little Brother Hollowing Tool.
Hamlet Hollowing Gate
Available in 19mm (3/4") and 25mm (1"). Other stem sizes can be made to order, but will have a longer lead time.
Hamlet Side Handle
Will fit both Little Brother & Big Brother.
Hamlet Big / Little Brother Edge Protector
1x replacement edge protector that fits the Hamlet Big and Little Brother Hollowing Tool.
Robert Sorby Hollowmaster
The Robert Sorby Hollowmaster is the perfect complement to the Multi Tip Hollowing Tool. It uses the same unique design of a meaty 3/4" flat shank which when laid on the tool rest gives ample support to prevent the tool from being turned over by the rotation of the wood. You are not fighting the laws of nature, but removing wood with ease.
It's swan neck design means that the Hollowmaster...
Robert Sorby Midi Hollowmaster
The Robert Sorby Midi Hollowmaster is designed for generating square sections such as shoulders or tenons where a turned part is to be assembled into a hole - a chair leg is good example. This cutter is also useful on the outside of a round form, as well as long straight sections on spindle work. Excellent results can be achieved in shear scraping mode with cutter especially effective shear scraping...
Robert Sorby Multi-Tip Hollowing Tool
The Robert Sorby Multi-Tip Hollowing tool is one of the most versatile hollowing tool.
It is ideal for end and side grain and will under-cut rims.
Also included is a scraper blade for half round, shallow and flat work as well as shear scraping. New beading and coving cutters can also be fitted.
Includes use and sharpening instructions.
Robert Sorby Midi Multi-Tip Hollowing Tool
All the benefits and attributes of the full size Robert Sorby Multi-tipped Hollowing tool (RS-200KT) but 2/3 the size, giving access through a much smaller aperture when turning fine hollow forms.
1/2" flat surface allows for aggressive hollowing and the swivel clamp allows under cutting.
This tool comes with a full set of instructions and three cutters (RS-222, RS-111C and RS-112C).
![Lie-Nielsen SD-9 - Honing Guide Screwdriver [Preowned]](/images/products/thumbs/3968_10134.jpg "Lie-Nielsen SD-9 - Honing Guide Screwdriver [Preowned]")
