Sort By
Per Page
View
Grid
List
Crown Tools 1'' Bowl Finishing Scraper
The Crown Tools Bowl Finishing Scraper is a heavily curved end scraper - a favourite for many turners when it comes to the final cuts on the inside of a bowl.
The blade is 10mm thick and approx. 6 1/2'' in length.
M2-HSS (High Speed Steel)
Stained beech handle which is approx. 14'' in length.
Walleted.
Crown Tools Bowl Gouge
A bowl gouge is the perfect tool for roughing down bowl and platter blanks as well as shaping and hollowing to a good finish.
These tools are made by milling a U shaped flute in a round bar. The width (a little confusingly) is the width of the flute, rather than the diameter of the bar.
The larger gouges are ideal for roughing down blanks and reaching into large bowls. The 1/4" (6mm) is...
Crown Tools Pro PM Bowl Gouge
The Pro-PM is an exclusive range for Crown Tools and is the elite if all turning chisels.
Made from advanced Power Metal, the molten steel has been compressed and sintered giving the Pro-PM turning tools a cutting edge which Crown Tools claim will last up to four or five times that of a conventional High Speed Steel tool.
The chisels are hardened to between 66 degree and 69 degree Rockwell, enabling...
Glenn Lucas 5/8'' Bar Bowl Gouge
The Glenn Lucas 5/8'' Bar Bowl Gouge with 16'' handle.
This tool is great for the rough shaping of wet or dry bowls as well as refining work.
The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
Glenn Lucas Bowl Gouges
The Glenn Lucas Bowl Gouge - 3/8'' Round Bar (GL5S) or 1/2'' round bar (GL5)
Both can be used for the finer cuts on both the inside and outside of a bowl.
Handle is 16" for the GL5 and 14'' for the GL5S.
The gouges feature a secondary bevel on the heel to give the tools some clearance when going around tight corners making concave curves or coves.
Glenn Lucas Finishing Bowl Gouge - 5/8'' Round Bar
Glenn Lucas Finishing Bowl Gouge - 5/8'' Round Bar
Great tool for finishing the cuts on the bottom of the bowl inside.
Handle is 16" in length.
The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
Glenn Lucas Heavy Duty Bowl Roughing Gouge
The Glenn Lucas 3/4'' Heavy Duty Bowl Roughing Gouge with a 16" handle.
Ideal for rough shaping of unseasoned wood.
The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
Hamlet Bowl Gouge
Milled from round bar. Every Hamlet bowl gouge is finely turned for making the best of turned bowls, for heavy profile cuts or delicate feather cuts.
Hamlet Multi-Tip Scraper & Cutters
This versatile tool from Hamlet comes with three inter-changeable tips, which can be oriented to any position to give the most suitable angle of presentation to the work.
The three tips/cutters are round, pear and square in shape.
Handle is 10'' in length
Robert Sorby Fingernail Profile Bowl Gouges (Deep Flute)
The profile of this Robert Sorby Fingernail Profile Bowl Gouge increases the flexibility allowing a woodturner to perform "pull cuts" without catching the lathe bed. The greater cutting tip area allows for both delicate shearing cuts and for heavy profiling cuts.
Robert Sorby Standard Bowl Gouges (Deep Flute)
The Robert Sorby standard bowl gouges are a must in the tool kit of every bowl turner.
These tools are ideal for making bowls, capable of producing either massive profiling cuts or delicate finishing cuts as necessary.