Sort By
Per Page
View
Grid
List
Tormek SJ-200 Japanese Waterstone
This is the smaller version of the Tormek Japanese Waterstone suitable for the T-4 machine.
The Tormek Japanese Waterstone 4000 grit delivers a mirror finish with hardly any visible marks. Since the stone is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping* a tool.
This waterstone excels at sharpening hand tools like carving tools, knives,...
Tormek SJ-250 Japanese Waterstone
The Tormek Japanese Waterstone 4000 grit delivers a mirror finish with hardly any visible marks. Since the stone is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping* a tool.
This waterstone excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels where a minimum of steel removal is needed and a superior...
Tormek Small Knife Holder
The Tormek Small Knife Holder SVM-00 opens up the possibility to sharpen those really small knife blades, which up until now have been difficult to sharpen.
Normally small knives have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle.
The holder works together with the Tormek Knife Jig SVM-45.
You can sharpen...
Tormek Square Edge Jig
With the Tormek SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape.
The SE-77 Square Edge Jig is a further development of the SE-76 jig. It has been provided with an...
Tormek Stone Grader
With the Tormek Stone Grader SP-650 you can change the grit size of the Tormek original grindstone to give a finer sharpening surface. The other side of the Stone grader is used to maintain the grindstone, bringing new abrasive grains to the surface for an effective sharpening.
The Tormek Original Grindstone is designed so that it can be treated with the Stone Grader to change its quality from fast...
Tormek T-4 Sharpening System
Tormek T4 is an enhancement of the T-3 model taking the precision and stability to a completely new level. Vital functions like the motor and the main shaft are mounted in the zinc cast top which includes the integrated sleeves for the Universal Support. This advanced design ensures an unbeatable precision for the Universal Support, which is the foundation of the Tormek jig system.
You get a high...
Tormek T-8 Custom
Customise your own water cooled sharpening system with a Tormek T-8 Custom. This package enables you to create your own Tormek sharpening system, with your favourite accessories. Just add grinding wheels, honing wheels, the right jigs and your own creativity.
* Create your own sharpening system.
* Grinding wheel and honing wheel not included.
* Sharpen all your edge tools.
* Water cooled sharpening...
Tormek T-8 Original Sharpening System with Hand Tool Kit
Package deal contains the Tormek T-8 Sharpening System with Tormek HTK-906 Hand Tool Kit
Tormek T-8 Original Sharpening System with Woodturner's & Hand Tool Kits
Package deal contains the Tormek T-8 Sharpening System with both the HTK-906 Hand Tool Kit (FREE while stocks last) & TNT-808 Woodturner's Accessory Kit.
Tormek T-8 Original Sharpening System with Woodturner's Kit
Package deal contains the Tormek T-8 Sharpening System and the Tormek TNT-808 Woodturner's Accessory Kit.
Tormek T-8 Sharpening System
The Tormek T-8 sharpening machine maximises the precision with its revolutionary fully cast housing. This new design, together with a number of elaborated details, gives you the best conditions possible for a successful sharpening with top results.
The advanced design ensures an unbeatable precision for the Universal Support, which is the foundation of the Tormek sharpening system, since it controls...
Tormek T8-00 Storage Tray
The Tormek T8-00 Storage Tray stores all the accessories included with the Tormek T-8. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
WM-200 AngleMaster
HB-10...
Tormek TC-800 Case
The Tormek Case keeps your jigs and accessories organized and is easy to carry thanks to the premium leather handle. The case is made of high-quality materials with a slidable lid that keeps everything in place.
These cases are stackable for easy storage and compatible with the new storage trays HTK-00, TNT-00 and T8-00. The storage trays are redesigned and made of EPP, a permanent construction...
Tormek TNT-00 Storage Tray
The Tormek TNT-00 Storage Tray stores all the jigs included with their Woodturner's Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
TNT-300 Woodturner's...
Tormek Turning Tool Setter
The Tormek Turning Tool Setter TTS-100 is the key to an efficient sharpening of woodturning gouges and skews. It enables you to exactly create and replicate the edge angle on your bowl and spindle gouges as well as on your flat or oval skews with either a straight or a curved edge.
TTS-100 works in conjunction with the Gouge Jig SVD-186 and the Multi Jig SVS-50.
By knowing your exact profiles,...
Tormek US-105 Universal Support with Micro Adjust
The Tormek Universal Support is the basis for all Tormek jigs. US-105 has a square cut Acme style thread which prevents damage by the locking screws and a Micro Adjust with scale for precise setting of the edge angle and cutting depth.
Fits Tormek T-8, Tormek T-7 and Tormek 2000.
The versatile Tormek Universal Support is the basis of the Tormek system. It is made of 12mm (approx. ½")...
Tormek US-430 Extended Universal Support with Micro Adjust
The Tormek Extended Universal Support for sharpening long tools, such as long knives, cleavers and machetes. Micro adjust with scale for precise setting of edge angle and cutting depth.
Fits Tormek T-8, Tormek T-7 and Tormek 2000.
Length: 436mm. Height: 212mm.
Can be placed in these positions:
- Vertically for sharpening towards the edge.
- Horizontally for sharpening with the edge.
-...
Tormek Wide Centreing Knife Jig
This well balanced, patented jig provides extra stability when sharpening knives with long, flexible blades such as fillet knives. With the KJ-140 Wide Centreing Knife Jig, you achieve a symmetrical grind with the same angle on both sides of the blade. Regardless of the thickness and geometry of the blade, it will self centre in the jig, giving you the same result on both bevels. The longer clamp stabilises...
Tormek Woodturners Kit
The Tormek Woodturners kit contains everything you need to shape and sharpen all your turning tools, including two patented jigs (works like three!), a radiused leather honing wheel, a serious instruction, the appreciated Turning Tool Setter and the Tormek Case to store all your jigs.
The jigs are packed in TC-800 Tormek Case with the included TNT-00 Storage Tray. The Tormek Case keeps your jigs...
Tormek XB-100 Horizontal Base
The Tormek XB-100 Horizontal Base is an upgrade for earlier Tormek machine models. With the Horizontal Base you can move the Universal Support from vertical mount (for grinding towards the edge) to horizontal mount for grinding away from edge.
ProEdge Knife Sharpening Accessory Kit
The main jigs and belts required for sharpening you kitchen knives on the Robert Sorby ProEdge.
The Robert Sorby ProEdge Knife Sharpening Accessory Kit includes......
Raised Wear Platen/Back Plate
Universal Arm
Small Knife Holder with angle adjustment collar
Large Knife Holder with angle adjustment collar
Allen Key/Wrench
Aluminium Oxide Belt 60 grit x1
Aluminium Oxide Belt 240...
ProEdge Woodturners Accessory Kit
The main jigs and belts required for sharpening woodturning gouges and chisels.
The Robert Sorby ProEdge Woodturners Sharpening Accessory Kit includes......
ProSet Bevel Angle Guide
Fingernail Profile Kit
Skew Jig
Standard Gouge Jig
Ceramic Belt 60 grit - x1
Ceramic Belt 120 grit - x1
ProEdge Woodworking Accessory Kit
The main jigs and belts required for sharpening chisels and plane blades.
The Robert Sorby ProEdge Woodworking Sharpening Accessory Kit includes......
Woodworkers’ Square Guide
Aluminium Oxide Belt 240 grit x1
Trizact Belt 600 grit x1
Trizact Belt 1200 grit x1
Trizact Belt 3000 grit x1
Robert Sorby Buffing Mop
Buffing Mop to fit the ProEdge Sharpening Machine.
Also part of the Buffing Kit (PEBUFFKIT)
Robert Sorby Cutter Holder
The Robert Sorby Cutter Holder is a handy little accessory which will accept most of the Robert Sorby cutters.
It avoids skinning fingers when sharpening.
Tip not included.
Robert Sorby Fingernail Profiling Kit
The fingernail profiling kit is ideal for shaping those perfect fingernail sweeps on bowl and spindle gouges.
This set contains the arm and the boss but both items are available individually.
Robert Sorby Honing Paste
Applied to a buffing mop the honing paste creates a highly polished finish on any steel.
Robert Sorby Honing Wheel
Honing wheel to fit the ProEdge Sharpening Machine.
Also part of the Honing Kit (WPEPHONEKIT)
Robert Sorby Honing Wheel Arbor
Honing wheel arbor to fit the ProEdge Sharpening Machine.
Also part of the Honing Kit (WPEPHONEKIT)
Robert Sorby Honing Wheel Kit
This kit uses the abrasive honing wheel which can be shaped to allow for honing of gouge flutes - especially useful for woodcarving tools.
Items also available individually.
Robert Sorby Pigtail Mandrel
The Pigtail Mandrel to fit the ProEdge Sharpening Machine.
Also part of the Buffing Kit (PEBUFFKIT)
Robert Sorby ProEdge Aluminium Oxide Belts
This common abrasive is designed primarily to sharpen carbon steel bench chisels, carving tools and plane irons but will also hone harder high speed steel tools.
The material longevity is at the lower end of the abrasives scale they use on their belts, but makes an excellent economical choice. Work your way through grit sizes (heavier grits for the removal of more material) to achieve a fine finish...
Robert Sorby ProEdge Buffing Kit
The Robert Sorby ProEdge Buffing Kit includes:
Robert Sorby ProEdge Pigtail Mandrel
Robert Sorby ProEdge Buffing Wheel
Robert Sorby ProEdge Ultra-Fine Buffing Compound
Robert Sorby ProEdge Ceramic Belts
This hardwearing material is a great choice for profiling and re-profiling damaged tools.
The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical.
Robert Sorby ProEdge Knife Holder Large
For hunting knives and those with blades over 8".
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Robert Sorby ProEdge Knife Holder Small
The Robert Sorby ProEdge Small Knife Holder can be used for pocket knives, carving knives and blades up to 8" long.
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Robert Sorby ProEdge Long Grind Jig
Helps you to create three different fingernail profiles.
Robert Sorby ProEdge Proset
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset.
By placing the gouge into the clamp of the profile arm and then extending the gouge up-to the required stop and locking it into place will allow for precise and repeatable bevel angles to be obtained.
Robert Sorby ProEdge Skew Jig
The Skew Jig allows the turner to accurately and safely sharpen his skew chisels.
Robert Sorby ProEdge Trizact Belts
Perhaps the most popular in the range of belts. This robust material is designed to handle the demands of all steels. Not strictly 'grit sizes' these belts are built using brick and pyramid abrasive shaping.
The highest 3000 'grit' size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.
Robert Sorby ProEdge Zirconium Belts
Designed for HSS tools, drill and router bits this material provides good value.
The 60 grit belt will tackle the most damaged surface. Use the 120 grit to provide a rewarding cutting edge and finish.
Robert Sorby Short Tool Platform with Arm
Increases access when tools are getting old and worn.
Robert Sorby Standard Gouge Jig
Allows easy sharpening of all standard ground woodworking gouges.
Robert Sorby Woodworkers' Square Guide
This simple to use jig has been designed as an upgrade to the current woodworking chisel jig (PESQ). This jig can be adjusted to ensure exact and repeatable 90 degree angles can be achieved every time. A stepped plate raises the tool to be sharpened away from the tool platform.
Ideal for sharpening chisels and plane irons.
Robert Sorby Woodworking Chisel Jig
Accurately ensures a straight cutting edge on any woodworking chisel.
The Robert Sorby ProEdge Ultimate Sharpening System
The updated version of the ever popular Robert Sorby ProEdge sharpening system. In all honesty the machine has remained the same as nothing really needed to be updated!
Robert Sorby have however changed from using the old terms of 'Basic' and 'Deluxe or Plus'. Thankfully it has been simplified, and the Sorby machine comes in one edition which includes a single 120 grit aluminium...
The Robert Sorby ProEdge Ultimate Sharpening System + 3 Accessory Kits
The updated version of the ever popular Robert Sorby ProEdge sharpening system. In all honesty the machine has remained the same as nothing really needed to be updated!
Robert Sorby have however changed from using the old terms of 'Basic' and 'Deluxe or Plus'. Thankfully it has been simplified, and the Sorby machine comes in one edition which includes a single 120 grit aluminium...
The Robert Sorby ProEdge Ultimate Sharpening System + Knife Sharpening Accessory Kit
The updated version of the ever popular Robert Sorby ProEdge sharpening system. In all honesty the machine has remained the same as nothing really needed to be updated!
Robert Sorby have however changed from using the old terms of 'Basic' and 'Deluxe or Plus'. Thankfully it has been simplified, and the Sorby machine comes in one edition which includes a single 120 grit aluminium...