Autonet 150mm Discs - Box of 50
We now stock Autonet in 150mm discs instead of Abranet. Like Abranet, Autonet was orginally designed for the automotive industry and comes from abtrasives experts - Mirka. Its unique patented sanding material which contains thousands of small holes, making it possible to effectively vacuum away dust and other particles without clogging the disc surface. The result is seen as a very uniform sanding...
Autonet 150mm Discs - Pack of 10
We now stock Autonet in 150mm discs instead of Abranet. Like Abranet, Autonet was orginally designed for the automotive industry and comes from abtrasives experts - Mirka. Its unique patented sanding material which contains thousands of small holes, making it possible to effectively vacuum away dust and other particles without clogging the disc surface. The result is seen as a very uniform sanding...
Autonet Mixed Bag of Discs
We now stock Autonet in 150mm discs instead of Abranet. Like Abranet, Autonet was orginally designed for the automotive industry and comes from abtrasives experts - Mirka. Its unique patented sanding material which contains thousands of small holes, making it possible to effectively vacuum away dust and other particles without clogging the disc surface. The result is seen as a very uniform sanding...
Robert Sorby Sandmaster
The Robert Sorby Sandmaster is an essential part of every turner's tool kit.
It comes with 5 different grits of abrasive to take even the roughest projects to a glass-like finish every time. It has an adjustable 2" velcro pad and comes complete with 2 each of 60, 120, 180, 240 & 400 grit sanding discs. You avoid the uneven finish often associated with hand sanding and there is no danger...
Robert Sorby Sandmaster 2'' Sanding Discs
Robert Sorby Sandmaster 2" velcro sanding discs.
Aluminium Oxide. Supplied in packs of 10
Ashley Iles 1 1/2'' Shallow Roughing Out Gouge
37mm 1½" handled shallow pole roughing gouge by Ashley Iles.
These tools have carbon steel blades, not HSS that you would find in the turning tools we offer from the likes of Hamlet and Robert Sorby. Carbon steel is preferable on a pole lathe because it will give you a finer edge, but more critically it is easier to sharpen if you are away from the power grid. So this roughing gouge...
Ashley Iles 1 1/4'' Deeper Roughing Out Gouge
31mm 1¼" handled deeper pole roughing gouge by Ashley Iles.
These tools have carbon steel blades, not HSS that you would find in the turning tools we offer from the likes of Hamlet and Robert Sorby. Carbon steel is preferable on a pole lathe because it will give you a finer edge, but more critically it is easier to sharpen if you are away from the power grid. So this roughing gouge is...
Ashley Iles 2'' Flat Chisel
50mm 2" handled pole chisel by Ashley Iles.
These tools have carbon steel blades, not HSS that you would find in the turning tools we offer from the likes of Hamlet and Robert Sorby. Carbon steel is preferable on a pole lathe because it will give you a finer edge, but more critically it is easier to sharpen if you are away from the power grid. So this chisel is designed with the pole lathe...
Ashley Iles 3/4' Skew Chisel
19mm 3/4" handled skew chisel by Ashley Iles.
These tools have carbon steel blades, not HSS that you would find in the turning tools we offer from the likes of Hamlet and Robert Sorby. Carbon steel is preferable on a pole lathe because it will give you a finer edge, but more critically it is easier to sharpen if you are away from the power grid. So this skew chisel is designed with the pole...
Ashley Iles 3/8' Spindle Gouge
9mm 3/8" Handled spindle gouge by Ashley Iles.
These tools have carbon steel blades, not HSS that you would find in the turning tools we offer from the likes of Hamlet and Robert Sorby. Carbon steel is preferable on a pole lathe because it will give you a finer edge, but more critically it is easier to sharpen if you are away from the power grid. So this spindle gouge is designed with the pole...
Ashley Iles Ferret (Handled)
A fibre extracting and ring release tool. Universal - works left and right handed.
These tools have carbon steel blades, not HSS that you would find in the turning tools we offer from the likes of Hamlet and Robert Sorby. Carbon steel is preferable on a pole lathe because it will give you a finer edge, but more critically it is easier to sharpen if you are away from the power grid. So this ferret...
Ashley Iles Pole Lathe Tools - Set of 6
A set of 6 of the most popular pole lathe tools from Ashley Iles. These tools have carbon steel blades, not HSS that you would find in the turning tools we offer from the likes of Hamlet and Robert Sorby. Carbon steel is preferable on a pole lathe because it will give you a finer edge, but more critically it is easier to sharpen if you are away from the power grid. So these chisels and gouges are designed...
Robert Sorby Patriot Chuck - Direct Thread
The Patriot lathe chuck was developed by Robert Sorby after many years of experience in selling, marketing and distributing another chuck. Hence the design incorporates all the key features which turners look for in a scroll chuck:
- compact design which does not strain lathe bearings yet is ideal for all sizes of project
- inserted system so there is a size to fit almost every lathe
- all jaws...
Robert Sorby SteadyPro Turning System - With Stem
The Robert Sorby SteadyPro is a very easy to use jig that provides additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system.
With the easy to adjust cantilever action of the clamping rollers, this ensures the optimum control for a large...
Robert Sorby Tool Rest Adjustment Collar
The Robert Sorby TRAC is the perfect addition for every woodturner.
It allows the tool rest height to be easily adjusted up or down, by up to 1/2” (13mm), by turning the outer adjustment ring.
The TRAC ensures the tool rest stays at the personally set height, even when the tool rest locking handle is released, allowing the tool rest to be moved to a new position without the need to reset...
Robert Sorby Patriot Chuck - With Insert
The Patriot lathe chuck was developed by Robert Sorby after many years of experience in selling, marketing and distributing another chuck. Hence the design incorporates all the key features which turners look for in a scroll chuck:
- compact design which does not strain lathe bearings yet is ideal for all sizes of project
- inserted system so there is a size to fit almost every lathe
- all jaws...
Robert Sorby Bowl Reversing Jaws
Robert Sorby Bowl Reversing Jaws are designed for finishing the outside and foot of a bowl. Lightweight, but extremely strong solid aluminium construction with 10 different location points to hold a variety of sizes of bowl. Rubber grips hold the project in place without causing damage.
Maximum bowl diameter 9". 10" capacity over bed bars.
The photo shows the Bowl Reversing Jaws fitted to a...
Robert Sorby Long Nose Jaws
Robert Sorby Long Nose Jaws have a reach of 4" allowing bowls to be remounted internally. The shape of the jaws allows easy access to the back of the project. Dovetailed internally and externally for extra versatility.
The photo shows the Long Nose Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Pin Jaws 1' (25mm)
Robert Sorby 1" Pin Jaws have extra length of these jaws makes them suitable for awkward pieces of wood like burrs. Dovetailed on the inside and outside they are ideal for small projects or tall turned items like pepper-mills.
The photo shows the Pin Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ1 Jaws - 1' (25mm)
1" Jaws. With a fine internal and external dovetail, these 1" jaws are perfect for gripping miniature projects. The jaws expand from 25mm to 50mm and compress from 39mm down to 14mm.
Also compatible with Nova and Supernova chucks.
The photo shows the RSJ1 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ15 Jaws 1 3/8' (35mm)
1 3/8" Jaws. Designed for smaller projects like boxes and bowls up to 6".
The photo shows the RSJ15 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ3 Jaws 2 3/4' (70mm)
2 3/4" Jaws. For larger projects and bowls up to 13" where a little extra grip is required.
The photo shows the RSJ3 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ4 Jaws 3 1/2' (89mm)
3 1/2" Jaws. Intended for bowls up to 16" needing substantial holding power.
The photo shows the RSJ4 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJDG Deep Grip Jaws
Robert Sorby Deep Grip Jaws have deep sides of these jaws make them ideal for large logs or awkward pieces of wood. They come with both internal and external dovetails to hold cumbersome pieces securely.
The photo shows the RSJDG Jaws fitted to a Patriot Chuck (not included).
Robert Sorby RSJ5 Jaws 4 1/4'' (108mm)
Robert Sorby RSJ5 4¼" Jaws these jaws enable a much bigger recess or spigot to be held and are hence designed for bowls and platters over 16".
The photo shows the RSJ5 Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Zero Jaws
These innovative jaws allow the turning of extremely fine, detailed pieces like lace bobbins as they close right down. The unique dome shape enables the turner to work close to his project. At the same time the dome can be used for internal gripping of larger projects without the fear of marking.
The photo shows the Zero Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Deluxe Revolving Centre System
The Robert Sorby Hollow Revolving Centre Sets are available in 1 and 2 morse taper. Six different accessories - deluxe revolving centre, ring centre, hollow centre, location pin, 60 degree point, mini 60 degree point, and cup centre. These accessories make this a highly versatile system which will cater for almost every demand.
The boxed set also includes a useful ejection tool to remove the various...
Robert Sorby Steb Drive
The Robert Sorby Steb Drive uses the same principles as the original patented Stebcentre the Steb Drive conveniently fits in the jaws of a Patriot chuck. Its serrated teeth and spring-loaded centre pin create an unparalleled grip on wood.
Robert Sorby Box Scraper Platform
The modular tool rest system from Robert Sorby enables the turner to build up a collection of tool rests without going to great expense.
Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external. This box scraper platform can be used in conjunction with just one stem.
Cross bars are specially hardened to avoid those troublesome nicks and...
Robert Sorby External Bowl Crossbar 9'
This modular tool rest system from Robert Sorby enables the turner to build up a collection of tool rests without going to great expense.
Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem.
Cross bars are specially hardened to avoid those troublesome nicks and...
Robert Sorby Tool Rest Crossbar 4'
Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut.
The cross bars from the new Modular...
Robert Sorby Tool Rest Crossbar 6'
Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut.
The cross bars from the new Modular...
Robert Sorby Tool Rest Crossbar 9'
Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut.
The cross bars from the new Modular...
Robert Sorby Tool Rest Stem
These stems work with the Robert Sorby Modular Tool Rest System.
Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish.
Stems are available in 1/2", 5/8", 3/4", 7/8", 1", 25mm, 28mm and 30mm diameters to fit most popular lathes.
Robert Sorby Sizing Tool
The Robert Sorby Sizing Tool is used in conjuction with a parting tool to obtain accurate and consistent diameters up to 3" on spindlework. It fits either the Robert Sorby 3/8" beading and parting tool or bedan.
The two thumb screws lock the sizing tool firmly in place.
How to use:
Set the parting tool to the desired size with a steel rule – lock tool in position by tightening...
Taliaplast 1/4 Sector Compass with Pencil Holder
Black burnished steel with brass fittings and square section legs to round tips.
Made by the French in France.
Taliaplast 1/4 Sector Divider
Polished steel.
Square section legs to round tips.
Made by the French.
Taliaplast Spring Calipers - Polished Steel
Well made spring calipers. The adjuster doesn't wobble or fall off after a few months. Robust & long lasting.
Polished steel.
Made by the French in France.
Taliaplast Spring Compass with Pencil Holder - Polished Steel
These are very well made spring compasses. The adjuster doesn't wobble or fall off after a few months. Robust & long lasting.
Polished steel.
Made by the French in France.
Taliaplast Spring Dividers - Polished Steel
These are very well made spring dividers. The adjuster doesn't wobble or fall off after a few months. Robust & long lasting.
Polished steel.
Made by the French.
Veritas Thickness Calipers
Primarily used by turners, these Veritas thickness calipers can be fitted into virtually any shape of vase or bowl.
To use, open the caliper by just pulling the legs apart (having the spacing nut between the legs rather than outside them allows this), put in position and then set the spacing nut to the wall thickness. Open calipers, remove and measure tip gap.
The spacing nut can be adjusted...
Tormek Adjustable Tool Rest
With the Tormek Adjustable Tool Rest you get an extended support surface from the Universal Support. It is ideal for sharpening turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. You can also use it for cabinet scrapers and hollowing tools.
It has a generous surface, 90 × 110mm, which permits a safe and steady positioning of the tool towards the stone.
The...
Tormek AngleMaster
The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool.
The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone diameter from 250 mm or 10" down to 150 mm or 6", so you can achieve an exact setting even as the stone wears.
Tormek Anti-Corrosion Concentrate (2 Pack)
The Tormek Anti-Corrosion Concentrate makes water non-corrosive. Always use with Tormek diamond wheels. It can also be used with grindstones.
Add 10ml concentrate to 250ml water (~4%). Scale for correct dilution. Mix Anti-Corrosion Concentrate and water before adding to water trough. If you want to save the mix overnight, remember to lower the water trough. Does not contain anti-freeze.
Each...
Tormek AWT-250 Advanced Water Trough
The Tormek Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools.
Magnet Cleans the Stone
The water trough incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone...
Tormek Axe Jig
With the Tormek Axe Jig SVA-170 you will be surprised to see how sharp you can get an axe. The jig firmly supports the axe, and enable you to sharpen it with a constant edge angle.
Tormek Bench Grinder Kit
A package deal comprising the Tormek BGM-100, Tormek SVS-50 Multi-Jig, Tormek TTS-100 Turning Tool Setter and the Tormek SVD-186 Turning Tool Jig.
Tormek BGM-100
With the BGM-100 you can use Tormek jigs and setting devices on your bench grinder, giving you perfect control. The chosen shape and edge angle are precisely repeatable. The BGM-100 also allows the use of other Tormek woodturner's...