Starrett Adjustable Tri-Squares
Starrett Adjustable 90° precision tri-squares with 1mm and 1/2mm graduations on both sides.
13MA 100mm blade
13MC 150mm blade
Starrett Double Steel Square - Metric
Designed for tool and diemakers, these fine precision double steel squares from Starrett have adjustable blades, ideal for tight fits. 50mm Complete with Graduated, Graduated Narrow/Bevel Blades.
Narrow blade has mm and ½mm graduations. It is 4mm wide over a length of approximately 41mm and cut away at one end to a width of 2.4mm
Beveled blade is 45º on one end and 30º on the...
Sterling Tool Works Double Square
This precision square is supplied with one traditional graduated rule and a dovetailing rule providing a very versatile tool with many uses. The standard rule provides a wonderful compact square with excellent accuracy rivaling common machinist square accuracies of .001" per inch, per U.S. federal standard: GGG-S-656E. Available with either a 4" or 6" precision etched rule with chrome...
Sterling Tool Works Dovetailing Square
This precision square is supplied with a Sterling "Dovetailing Blade" that is incredibly handy for checking the squareness of your dovetails to ensure excellent fit and "gap less" joints after assembly. The reduced size of one end of the un-graduated rule allows precise checking of squareness in even some of the tightest "London style" dovetails. Regular size rules simply...
PEC Tools 2' Solid Square
The PEC Tools 2" Solid Square has a 2" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
PEC Tools 3' Solid Square
The PEC Tools 3" Solid Square has a 3" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
PEC Tools 4' Solid Square
The PEC Tools 4" Solid Square has a 4" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
PEC Tools 6' Solid Square
The PEC Tools 6" Solid Square has a 6" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
PEC Tools 9' Solid Square
The PEC Tools 9" Solid Square has a 9" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
PEC Tools 12' Solid Square
The PEC Tools 2" Solid Square has a 2" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0006").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
Joseph Marples 6" Try Square
The Joseph Marples Trial 1 6" squares have 1/8" thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges.
They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the try squares is well within that required by BS3322.
Joseph Marples 9" Try Square
The Joseph Marples Trial 1 9" squares have 1/8" thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges.
They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the try squares is well within that required by BS3322.
Joseph Marples 12" Try Square
The Joseph Marples Trial 1 12" Try Squares have 1/8" thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges.
They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the try squares is well within that required by BS3322.
Shinwa 90° Try Square - Metric
Stainless steel square.
Measurements on both sides
Angular accuracy 90°: 0.1 mm or less per 100 mm
Outside measurements: 150mm
Inside measurements: 120mm
Base length: 100mm
Veritas Precision Square - Metric
This could easily become the most-used measuring tool in your shop. An ideal size for cabinet-making, it has the accuracy of an engineer's square (0.001" per inch of length). All four edges are ground, and both faces are graduated on the inside and outside edges. This version is graduated in half millimetres on the 8cm leg and in millimetres on the 15cm leg.
Each is useful not only for general...