Sort By
Per Page
View
Grid
List
Narex Spoon Bent Gouge
A Narex gouge specifically designed for spoon making. The carving tool is spoon bent which makes it easier to hollow a recess. It also has a comfortable, longer than normal (to allow 2 hands for control) octagonal barrell shaped handle made from stained beech.
Narex have used a chrome-silicon alloy steel which is heat treated to 59HRc (which basically means it will take a good edge). Comes sharpened...
Oscar Rush Long Bent Gouge - medium sweep - 25/35/45mm
Oscar's gouges measure between 280mm and 300mm (11'' to 12'') overall including the octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
These long bent gouges are from a from a 50mm circle - medium sweep.
Widths - 25, 35 or 45mm
See Oscar at The London International Woodworking...
Oscar Rush Long Bent Gouge - shallow sweep - 25/35/45mm
Oscar's hand forged gouges measure between 280mm and 300mm (11'' to 12'') overall including the octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
These long bent gouges are from a 90mm circle - shallow sweep.
Widths - 25, 35 or 45mm
See Oscar at The London International...
Oscar Rush Long Bent Gouge - tight sweep - 25mm
Oscar's gouges measure between 280mm and 300mm (11'' to 12'') overall with octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
This long bent gouges is from a from a 30mm circle which is a tight curve.
Width - 25mm
See Oscar at The London International Woodworking Festival...
Oscar Rush Straight Gouge - medium sweep - 25/35/45mm
Oscar's gouges measure between 28cm and 30cm (11'' to 12'') overall with octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
These straight bodied gouges are from a from a 50mm circle - medium sweep.
Widths - 25, 35 or 45mm
See Oscar at The London International Woodworking...
Oscar Rush Straight Gouge - shallow sweep - 25/35/45mm
Oscar's gouges measure between 280mm and 300mm (11'' to 12'') overall with octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50mm or 90mm diameter circle.
These straight bodied gouges are from a from a 90mm circle - shallow sweep.
Widths - 25, 35 or 45mm
See Oscar at The London International Woodworking...
Oscar Rush Straight Gouge - tight sweep - 25mm
Oscar's gouges measure between 280mm and 300mm (11'' to 12'') overall with octagonal ash handles with brass ferrules..
Oscar's sweeps are based on the diameter of a circle.
Either a 30mm, 50 or 90mm diameter circle.
This gouge is a 25mm straight gouge with a tight/deep sweep (from a 30mm circle).
See Oscar at The London International Woodworking Festival Oct 24th...
Pfeil Series 1 - Double Bevel Chisel
These are straight chisels with a double bevel. Straight chisels are used to carve the blank into rough form and to work on large areas.
Pfeil Series 1e - Single Bevel Chisel
These are straight chisels with a single bevel. Like Series 1 chisels, these chisels are used to carve the blank into rough form and to work on large areas. Single bevel. The choice of single or double bevel is largely a matter of preference.
Pfeil Series 1S - Double Bevel Skew Chisel
These are double bevelled skew chisels. The edge is slightly skewed for easy cutting action; often used without a mallet. Removes neat shavings. Double bevel – so the chisel can be used with the skew to the right or left. Useful for carving lettering and ornamental forms.
Pfeil Series 1Se - Single Bevel Skew Chisel
The Pfeil Series 1Se Single Bevel Skew Chisel is an essential tool for woodcarvers who require accuracy and control in their projects. This chisel is expertly designed to carve blanks into rough forms and is particularly effective for working on large areas. The single bevel edge allows for smooth, precise cuts, making it ideal for both roughing out and fine detailing.
Key Features:
Single...
Pfeil Straight Gouge - Series 2
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 3
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 4
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 5
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 6
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Pfeil Straight Gouge - Series 7
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Series 7 and 8 sweeps are particularly useful for finishing work.
Pfeil Straight Gouge - Series 8
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. The broad range of sweeps and widths offered by Pfeil opens unlimited possibilities in sculpture carving.
Series 7 and 8 sweeps are particularly useful for finishing work.
Paul Adamson recommends the 25mm tool for making a Kuksa, his book can be viewed here
Pfeil Straight Gouge - Series 9
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. The broad range of sweeps and widths offered by Pfeil opens unlimited possibilities in sculpture carving.
The 15mm is one of our best selling Pfeil tools.
Pfeil Straight Gouge - Series 11
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Series 11 are the narrowest and are ideal for carving fine details like hair.
Pfeil Series 12 - 60° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
60°
Pfeil Series 13 - 90° V Parting Tools
The Pfeil Series 13 - 90° V Parting Tools are expertly crafted for woodcarvers who demand precision and versatility. These tools are designed for a range of detailed carving tasks, from lettering and ornamentation to sculpting intricate figures. Their 90° angle makes them ideal for creating sharp, clean cuts that enhance the depth and definition of your work.
Key Features:
High-Quality...
Pfeil Series 14 - 55° Soft V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
55°
Pfeil Series 15 - 45° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
45°
Pfeil Series 16 - 35° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
35°
.png "Last Ones!")
Auriou Short Fishtail Gouges Series No.9 - 6mm (7/32')
Lightweight with a beautifully forged short fishtail shape, this gouge, designed by renowned carver Chris Pye, is a lovely example of how hand forged tools, made in a traditional manner possess a delicacy that few manufacturers can match.
Here is the full list of these 7 little beauties which have octagonal ash handles with tapered brass ferrules. Unfortunately, since these gouges have now been...
 1.png "20% off")
Henry Taylor No.3 Allongee Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor No.3 Straight Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor No.5 Straight Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor No.7 Straight Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor No.9 Straight Gouges
20% discount from price shown. Whilst stocks last!
Henry Taylor No.11 Straight Gouges
20% discount from price shown. Whilst stocks last!
Pfeil Fishtail Chisel - Series 1F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Fishtail Gouges Series 3F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Fishtail Gouges Series 5F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Pfeil Fishtail Gouges Series 7F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
The 14mm in this series by Pfeil is a popular choice with our customers.
Blades are thin and light.
Pfeil Fishtail Gouges Series 9F
Fishtail chisels are tools that easily reach difficult areas as the cutting edge is wider than the shaft.
Blades are thin and light.
Henry Taylor No.3 Fishtail Gouge 3mm
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.5 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.7 Fishtail Gouges
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version...
Henry Taylor No.9 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.11 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Pfeil Long Bent Gouges Series 5L
For shaping recesses and working in corners.
Pfeil Long Bent Gouges Series 7L
For shaping recesses and working in corners.
Pfeil Long Bent Gouges Series 8L
For shaping recesses and working in corners.
Paul Adamson recommends the 25mm tool for making a Kuksa, his book can be viewed here
Pfeil Long Bent 60° V Tool - Series 12L
These tools are used for shaping recesses and working in corners.
Pfeil Series 1a - Spoon Bent Chisel
For shaping recesses and working in corners.
Pfeil Series 2a - Spoon Bent Gouge
For shaping recesses and working in corners.