Active Sales

This popular plane is a consistent good seller as woodworkers like the comfortable size and ease of use. Good iron. G++ condition. Classic Hand Tools offer this plane new for £169. Original box and leaflet. A commission sale.

This was a special limited-edition plane: 500 of these planes were made available at the time. The skew block plane features a white bronze cap iron, and a rosewood front knob. Each plane was engraved with its limited-edition number. This plane is number 319 (of 500). The plane has been used but is in G+ - G++ condition. We have gently cleaned this plane and it now presents well. Note the condition...

Boxed in good condition. G ++ This is popular with chairmakers for hollowing out seats etc. Available brand new for around £130 Little used with minor tarnishing to handles. Full blade. A commission sale.

In Good+ condition (G+) this plane is one of the most popular planes we sell at Classic Hand Tools. The plane has been used and shows cosmetic signs of use. Good blade life remaining. Cherry front knob and tote in nice order. Lie Nielsen box. A commission sale.

Extremely well look after crosscut carcass saw with attractive curly maple handle. This saw is an exact copy of a British saw made in 1830 with a milled brass back, Swedish steel blade (11'' long – 275mm) and traditional brass split nut saw bolts. Original box and leaflet. G++ A commision sale.

Dating from 2012 but very well looked after with 80-85% of the O1 blade remaining. Boxed. Wear marks consistent with use but in perfect working order.

Unused and as new. Original box and instructions. This is the description from our Veritas section where the 2 other sizes are currently available: Veritas tapered tenon cutters will put tapered tenons on the tips of turnings, dowels, or rustic furniture components to fit into tapered holes, for example, legs and spindles on a Windsor chair. Use the cutter like a hand-held pencil sharpener; you...

A Set of 4 Swiss made carving tools in a canvas tool roll. Plum handles. Unused knives that have been sharpened. The Pfeil Sculpture Carving Knives are a set of 4 carving knives in a quality tool roll: Large Schaller knife Small Schaller knife Large Canard knife Small Canard knife A commission sale.

Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane. Toothed blades have small chisel-like teeth .030'' (.762mm) wide and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set smoothing plane ideally purchased through Classic Hand Tools. The blade comes with a 25° flat ground bevel; it sits in the tool at...

Pre-owned but little used in Lie-Nielsen leather case. Note: the curve is extremely shallow. This Boggs Spokeshave is hefty and solid, weighing 12oz Designed for fine, precise shaping in all woods. Body is 10'' long with a 1'' wide sole The sole of the curved spokeshave has a gentle, 5'' radius for working inside curves 2'' wide x 1/8'' thick...

11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...

Upsweep & Cutting Knives KN203 & KN204 New, old stock. With attractive bocote and leather insert handles these 2 knives were part of a small special edition from well-known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge each measuring approximately...

New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...

New This system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And as a Brucey Bonus RSTM-GT2 Excelsior Detail Point Cutter (titanium nitride)

These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be stuck with a mallet when working on large sculptures. but of course, they can be used by hand to shape work without whacking with a mallet as required. The old Flexcut code is MC 302 which...

New current stock. A fishtail bundle! Ok – so this is excess stock created through our enthusiasm to promote this great British brand a few years back. We still love these Henry Taylor carving tools but when HT slimmed down their overall offering, we were holding quite a lot (hundreds!) of carving tools. At that point we decided to concentrate our future investment in woodcarving hand tools...

Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...

This is old stock from the early days of starting up Classic Hand Tools. Sanderson Hardware are still going in California. (Note - these cotter pins are different to what they offer now). The diameter of the ring pull is 3/4". The rod stock is 1/8" diameter and 2 1/4” ong . The square plate is ¾” x 5/8” with 4 screw holes (screws provided). The plate has...