Arno Carbur 2 Solid Carbide Burnisher
The burnisher has two solid carbide rods for turning a hook. The round rod is ideal for turning a hook on scrapers with a typical hardness in the Rockwell (c) range of 40 to 51.
The pointed rod is used when the round rod won't turn a hook because of the hardness of the steel. The pointed rod focuses your downward pressure on a single point and can turn a hook on the hardest scrapers. (Note the...
Clifton Burnisher
The Clifton Burnisher is a great tool for honing the edges of your cabinet scrapers. This item has a 5" long blade x 7/16" diameter (11mm) made from Sheffield produced hardened carbon steel (hardened to 62 rockwell).
It has a Walnut handle with a specially designed brass ferrule that protects the fingers and knuckles.
Crucible Card Scraper
Card scrapers are usually sold as rectangles or squares. What has been lost to time is that the woodworker is supposed to shape the tool to his or her needs – much like the cutting edge of a jack plane or smoothing plane.
So woodworkers of the last 50 or 60 years have found ways to make a rectangular scraper work. Most of us bow the tool with our thumbs to present a curved cutting edge to...
Flexcut Scraper Set SK121
These Flexcut scrapers are easy to use (even for children) and come ready to use.
There are 6 different profiles in the set. Once inserted into the handle any side can be used as a scraping edge.
In just a few strokes you can remove any uneven surface or finish from your work without the use of sandpaper. No airborne dust! The scrapers can remove rough areas e.g on hand or power carving or ripple...
Hock Burnishers
Hock burnishers are hardened (Rc64) and polished high carbon tool-steel rods that stand up well to constant use on scraper edges. Most others are not hard enough for this demanding application.
Needs to be handled.
Size: 3/8" x 6
Lie Nielsen Carbide Burnisher
Creating a burr on a scraper requires a hard, highly polished surface.
The Lie Nielsen Carbide Burnishers have a 4" polished solid Carbide shank held in a Cherry handle. A flared Brass bolster protects your fingers while burnishing.
Lie-Nielsen Hand Scraper Blade Set
Lie-Nielsen Hand Scraper Set
A pair of 6" x 2 1/2" hand scrapers made from premium, high carbon Swedish Tool Steel.
One scraper is 0.02" thick, which makes a very flexible scraper. The second is 0.032" thick, which is much stiffer. These blades are ground square on the long edges, are easy to use and very handy.
Lynx Concave Scraper Set
The Lynx Concave Scraper Set contains 2 scrapers shaped specifically to scrape curved areas such as spindles, chair legs etc. The high grade steel used on these scrapers, has been cut with various concaved areas to suit different sized curves.
The recess areas are sized as follows:
Scraper 1 - 1/4", 3/8", 1/2", 5/8" and 6/8"
Scraper 2 - 7/8", 1", 1 1/8",...
Lynx Convex Scraper Set
The Lynx Convex scraper set contains 2 scrapers that are specifically shaped to scrape in recesses such as on skirting boards etc. The high grade steel used on these scrapers, has then been cut with various convex areas on the scraper to suit various sized areas.
The convex areas are the following sizes:
Scraper 1 - 1/4", 3/8", 1/2", 3/4" and 5/8"
Scraper 2 - 7/8",...
Lynx Mini Scraper Set of 4
The Lynx four piece Mini Scraper Set is the perfect way to smooth/remove wood and finish small areas.
This set has the following shapes included:
Mini gooseneck - good for curved areas
Mini oval - good for curved areas
Mini square - good for a variety of straight edges for a wide and even has notches in which is good for luthier work ie acoustic bridge saddle crowning
Mini Concave/Convex - good for...
Lynx Quadrant Scraper Set
This Lynx Quadrant Scraper Set is the perfect solution for scraping various quadrant areas and has the benefit of the straight edge to get into corners, which sanding cannot always do.
This two piece set has the following quadrant sizes cut from the scraper:
Scraper 1 - 1/8", 3/16", 1/4", 5/16"
Scraper 2 - 3/8", 7/16", 1/2", 5/8"
These are pefect for...
Narex Uni-Scraper
Universal scraper from Narex that can be used for many joinery, carving or restoration tasks.
200mm long. 14mm wide. 0.75mm thick blade.
Pax Burnisher
Used in conjunction with Cabinet Scrapers to hone their edges after use.
* Walnut handle with Brass Ferrule
* Steel blade
* Puts burr back on Cabinet Scrapers to keep their edges sharp
Pax Cabinet Scraper Set (Shaped Set)
The Pax Cabinet Scraper Sets are a "must" for woodworkers. Made from stiff carbon steel (saw steel) these are used to scrape along wood to give a smooth finish to your projects. One of the simplest products that work wonders! .
The Shaped Set contains:
1 x Concave/Convex Scraper
1 x Gooseneck Scraper
1 x Double Curved Scraper
1 x 5" x 2 ½" Scraper
These are supplied...
Pax Cabinet Scraper Set (Square Set)
The Pax Cabinet Scraper Sets are a "must" for woodworkers. Made from stiff carbon steel (saw steel) these are used to scrape along wood to give a smooth finish to your projects. One of the simplest products that work wonders! .
The Square Set contains:
1 x 6" x 3" Scraper
1 x 5" x 2 ½ " Scraper
1 x 4" x 2" Scraper
These are supplied ready to use...
Pfeil Oval Burnisher
The Pfeil Oval Burnisher is used for burnishing cabinet scrapes.
Its oval section is a mirror polished steel bar and is 160mm long with cherry handle.
Pfeil Round Burnisher
The Pfeil Round Burnisher is used for burnishing cabinet scrapes.
9mm diameter polished steel bar, 165mm long with cherry handle.
Pfeil Triangular Burnisher
Pfeil Triangular Burnisher has a triangular section mirror polished steel bar, 160mm long with cherry handle.
Set of 3 Clifton Fine Scrapers
A more flexible version of the very popular Clifton scrapers - made in Sheffield, England
Clifton scrapers are made of medium carbon steel with a hardness of RC40/42. This gives them the best balance of edge holding qualities and a flex in the blade for control in using the tool.
Set of 3 - includes 5" x 2.1/2" rectangle, Concave/Convex & Gooseneck.
0.015" carbon steel,...
Set of 3 Clifton Scrapers
A very useful set of 3 scrapers - made in Sheffield, England
Clifton scrapers are made of medium carbon steel with a hardness of RC40/42. This gives them the best balance of edge holding qualities and a flex in the blade for control in using the tool.
Set of 3 - includes 5" x 2.1/2" rectangle, Concave/Convex & Gooseneck.
0.032" stiff carbon steel.
Burnisher not included.
Set of 4 Veritas Super Hard Scrapers
Most cabinet scrapers are sheared from spring steel, hardened to Rc38-42. These scrapers are harder (Rc48-52) and hold an edge longer. The edges are carefully milled to a square, sharp 90° ready for immediate use on fine work. For heavy-duty use, a hook must be burnished onto them. The prepared edges not only save you the initial effort of filing and stoning, but indicate the condition they should...
Vallorbe 10" Blunt Mill File Single Cut
Vallorbe single cut mill files are used in preparation for saw sharpening, and for squaring the edges of cabinet scrapers prior to sharpening. Can be used in conjunction with Veritas Jointer/Edger. Handles are also available, please see separate listing.
Veritas Card Scraper Burnisher
A new take on typical single-handled burnishers, this latest tool from Veritas is an innovative design permitting a two handed grip, improving control so you can roll precisely the sort of hook you want on your scraper. As comfortable to grip as a spokeshave, it is held between the thumbs and forefingers, keeping your fingertips close to the carbide rod. This gives you much better tactile feedback,...
Veritas Chair Devils
Veritas Chair devils are wonderful tools for final shaping and smoothing of round parts such as chair spindles and posts. The specially shaped scraper blade rounds the workpiece, removing any spokeshave marks.
• Machined steel bodies fitted with hardwood handles
• Machined toe and two thumbscrews are solid brass
• High-carbon steel blades are 0.040'' thick, hardened...
Veritas Curved Scraper Sets
These sets of three curved scrapers will handle a wide range of scraping jobs.
The rectangular model with convex/concave ends is excellent for bowl work or for scraping spindles.
The shmoo shape (easily recognizable to long-time readers of Li'l Abner) is equally useful for a wide range of concave surfaces as well as large moldings and small spindles.
The third style has two different gentle...
Veritas Jointer/Edger
This jointer/edger can be used on cabinet scrapers, scraper plane blades, handsaws and ski edges.
It has a 45° jointing capability as well as the standard 90°. The handle has a comfortable, ergonomic shape and the screws are designed so they can be tightened with a small coin (to accommodate skiers).
In the shop, it is invaluable for jointing scrapers and handsaws; the fence is relieved next...
Veritas Scraper Holder
There is no tool handier in the workshop than a cabinet scraper, and this holder lets you use it to maximum advantage.
The light, strong, glass-filled nylon body, with all brass fittings, is kind to a sharp hook. You can slip any thickness of scraper (6"/150mm long) into it, clamp it in position, and set the amount of bow with the screw-actuated centre pad.
The body is moulded to fit your hands...
Veritas Scraper Shave
The Veritas Scraper Shave is a versatile small scraper suitable for small-scale work, fine detailing, or any application where a normal scraping plane would be too large.
The design of the tool allows a controlled scraping action that effectively smoothes the workpiece. Can be used as a companion tool with the chair devils for smoothing of non-round chair parts such as crest rails, arm bows and...
Veritas Variable Burnisher
Cabinet scrapers are among the most useful (and least expensive) tools in a woodworking shop. Unfortunately, many woodworkers have difficulty putting the optimum hook on a scraper for the job at hand. Since scrapers have four working edges, it is possible to make one into a highly versatile tool with each edge having a different cutting characteristic. The problem most people have is choosing the...