Tormek Adjustable Tool Rest
Tormek Adjustable Tool Rest
With the Tormek Adjustable Tool Rest you get an extended support surface from the Universal Support. It is ideal for sharpening turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. You can also use it for cabinet scrapers and hollowing tools. It has a generous surface, 90 × 110mm, which permits a safe and steady positioning of the tool towards the stone. The...
£30.00 inc VAT
Tormek Centering Knife JigTormek Centering Knife Jig
New
Tormek Centering Knife Jig
With Tormek's patented KJ-45 Centering Knife Jig, you'll get symmetrical bevels with the same angle on both sides of the knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thicker, tapered hunting knife, you'll get the same results on both bevels of the knife without needing to reset the jig. The KJ-45 Centering Knife...
£39.98 inc VAT

Tormek Wide Centering Knife JigTormek Wide Centering Knife Jig
New
Tormek Wide Centering Knife Jig
This well-balanced, patented jig provides extra stability when sharpening knives with long, flexible blades such as fillet knives. With the KJ-140 Wide Centering Knife Jig, you achieve a symmetrical grind with the same angle on both sides of the blade. Regardless of the thickness and geometry of the blade, it will self-center in the jig, giving you the same result on both bevels. The longer clamp stabilizes...
£49.98 inc VAT
Tormek Gouge JigTormek Gouge Jig
Tormek Gouge Jig
With the Tormek gouge jig SVD-186 R you can easily sharpen your fingernail shaped woodturning gouges to a razor sharpness. The high level of control enables you to exactly replicate your chosen profile. With this gouge sharpening jig you can also sharpen woodcarving tools with complex shapes such as curved or bent carving gouges and V-tools. Redesigned version 2020 New locking screw to lock...
£79.00 inc VAT

Tormek Multi Jig
Tormek Multi Jig
It is not without reason this Tormek jig is named "Multi Jig". It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat, which really makes it two jigs in one. With SVS-50 you can sharpen square and skew turning chisels with straight or curved edges as well as parting tools, roughing gouges and gouges and chisels for woodcarving.
£52.00 inc VAT
Tormek Square Edge Jig
Tormek Square Edge Jig
With the Tormek SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape. The SE-77 Square Edge Jig is a further development of the SE-76 jig. It has been provided with an...
£55.00 inc VAT

Tormek Short Tool Jig
Tormek Short Tool Jig
This little Tormek woodcarving jig is designed for sharpening short woodcarving tools and the shortest chisels. Suitable for straight shanked tools, such as wood chisels, carving gouges and tools for power carvers. The jig has two parallel flanges running on both sides of the Universal Support which ensures that the jig at all times – even when rotated – holds the tool square to the...
£20.50 inc VAT
Tormek Axe Jig
Tormek Axe Jig
With the Tormek Axe Jig SVA-170 you will be surprised to see how sharp you can get an axe. The jig firmly supports the axe, and enable you to sharpen it with a constant edge angle.
£15.00 inc VAT

Tormek Knife Jig
Tormek Knife Jig
The Tormek Knife Jig SVM-45 is suitable for sharpening all kinds of knives; household knives, chef’s knives, craft knives and knives for hunting and fishing. You can also sharpen carver’s drawknives. Since the jig rests freely on the Universal Support you can follow the curve of the blade. The Universal Support is normally placed vertically for knife sharpening towards the edge....
£32.50 inc VAT
Tormek Small Knife Holder
Tormek Small Knife Holder
The Tormek Small Knife Holder SVM-00 opens up the possibility to sharpen those really small knife blades, which up until now have been difficult to sharpen. Normally small knives have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle. The holder works together with the Tormek Knife Jig SVM-45. You can sharpen...
£29.50 inc VAT

Tormek Scissors Jig
Tormek Scissors Jig
Give your scissors a bite on the Tormek with the SVX-150 jig. It fits all sorts of scissors from household scissors to heavy garden shears. You can also sharpen pinking scissors that make zigzag cuts in cloth as well as portable electrical hand planer blades. The scissors are mounted in a holder, which supports freely on a support plate. The grinding angle can be set so that you exactly replicate...
£47.00 inc VAT
Tormek Multi Base
Tormek Multi Base
With the Tormek Multi Base MB-100, you can sharpen on the side of the Tormek Diamond Wheels, thus creating a completely flat bevel that is preferable in some applications. The MB-100 has an adjustment line that allows you to fix the sharpening position based on the optimal setting for each tool and jig. For convenience, it can be mounted either vertically or horizontally. The MB-100 can be used...
£68.95 inc VAT

Tormek Drill Bit Sharpener
Tormek Drill Bit Sharpener
With the Tormek Drill Bits Sharpening Attachment you can now sharpen your drill bits (3-22mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape.
£230.00 inc VAT
Tormek Planer/Jointer Blade Jig
Tormek Planer/Jointer Blade Jig
With the Tormek Planer Blade Attachment SVH-320 you can sharpen HSS planer blades of any length. Also suitable for mitre guillotine blades. With this jig you will always work with sharp planer blades. You do not need to interrupt your work to send them away for sharpening. The jig copes with planer blades of any length. Blades longer than 270 mm (10½") are relocated in the blade holder and...
£160.00 inc VAT

Tormek Knife Profile Jig
Tormek Knife Profile Jig
The Tormek Knife Profile Jig SVP-80 sharpens all makes and shapes of moulding knifes with 24, 30 or 36 mm distance between the hole-centres. Since you sharpen the flat back surface of the knife, you can use the jig regardless of the profile. Max width 100 mm. Also for profiled paint removal blades.
£155.00 inc VAT