Sort By
Per Page
View
Grid
List
Pfeil Chip Carving Knife - Kerb 8
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 8 also known as Stecher Gross.
With this knife you can cut into the wood from the top or the side to create a straight line, you are using the whole width of the blade.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Pfeil Chip Carving Knife - Kerb 9
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 9 also known as Stecher Klein.
This knife is similar to Kerb 8 but with a smaller blade making it more suitable for chip carving and fine details.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 30mm
Pfeil Chip Carving Knife - Kerb 10
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 10 also known as Tarsomesser.
This knife is for narrow angles and corners, cutting from the top to the wood.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 35mm
Pfeil Chip Carving Knife - Kerb 11
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 11 also known as Detailschnitzmesser.
Use this knife to carve details, not specifically on chip carvings but for small objects or figures. The knife is used to create characters, using it for the details on faces for example or for small modifications.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade...
Pfeil Chip Carving Knife - Kerb 12
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 12 also known as Fuchmesser.
The most popular Pfeil knife for one-handed carving on small objects where the small piece of wood is held in one hand and the knife is used with the other hand. Compared to the Kerb 1 it has a curved blade which is not suitable for chip carving but which runs easily through the wood for rougher...
Pfeil Chip Carving Knife - Kerb 13
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 13 also known as Schnitzmesser Gerade.
The use of a Kerb 13 is similar to the Kerb 12 but with a straight blade more for cutting shapes and angles on small objects. Not suitable for chip carving, because of the size of the blade.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Pfeil Chip Carving Knife - Kerb 14
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 14 also known as Korbermesser.
This is a rather big and sturdy knife with a thick blade. It is used for basket weaving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Pfeil Chip Carving Knife - Kerb 15
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 15 also known as Gebogen, 2 Schneiden.
This is a small knife to carve fine details on objects and figures. The curved blade cuts on both sides and has a pointy tip so it can be used in many ways. It is not suitable for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length...
Pfeil Schaller Knife
Pfeil Schaller knives have a crowned blade. The back is also rounded so it does not touch the work. Hence being able to use them to carve concave curves and flat surfaces. Plum handle.
Large: blade length is 45mm.
Small: blade length is 30mm.
Pfeil Canard Knife
Pfeil Canard Knives are for very fine chip carving. They have plum handles and the blade has a straight cutting edge which is ground thin.
Large: The blade length is 45mm.
Small: The blade length is 30mm.
Pfeil Abegglen Detail Knives
These Pfeil Abegglen detail knives have two cutting edges. One side with round cutting edge and the other with a hollow cutting edge. As a result it is possible to make deep cuts but also to carve letters and ornamental work. A universal knife with many uses.
Small hexagonal oiled acacia wood handle.
Large: Blade Length 130mm, Cutting Edge 33mm.
Medium: Blade Length 125mm, Cutting Edge 27mm.
Small:...
Pfeil Brienz Carving Knives
Pfeil Brienz carving knives are detail carving knives designed by the Brienz Woodcarving School.
Large - 190mm total length, blade 75mm
Small - 170mm total length, blade 60mm
Image shows the large knife.
Pfeil Spoon Knives - Half Round Small
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 50mm
Overall length 165mm
Series 25 Half-round small, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the kinfe away.
Series 26 Half-round small, bevel right;...
Pfeil Spoon Knives - Round Small
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 35mm
Overall length 150mm
Series 27 Round small, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the kinfe away.
Series 28 Round small, bevel right; typically...
Pfeil Spoon Knives - Half Round Large
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 60mm
Overall length 195mm
Series 21 Half-round large, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the kinfe away.
Series 22 Half-round large, bevel right;...
Pfeil Spoon Knives - Large
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 45mm
Overall length 180mm
Series 23 Round large, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the kinfe away.
Series 24 Round large, bevel right; typically...
Pfeil Arkansas Slipstones
Pfeil Arkansas Slipstones are available in four different profiles (see picture). They come separately, or, as a set of 4 in a wooden box.
The grit is in the region of 8000 and the size of the stones is approximately 60mm x 25mm 5mm
Pfeil Carver's Slipstone
The Pfeil Carver's Slipstone is an Arkansas stone used for honing gouges and V parting tools.
The grit is in the region of 8000.
The size of the slipstone is approx 110mm x 40mm x 8mm
Use with a light honing oil.
Arkansas stones are among the hardest and finest honing stones.
Pfeil Arkansas Stone in Wooden Box
The Pfeil Arkansas Stone is a flat stone that comes in a wooden box. Use with a light honing oil. Arkansas stones are among the hardest and finest honing stones.
Grit is in the region of 8000
Size of Box - 150mm x 75mm
Size of Stone - 125mm x 50mm
Pfeil Honing Oil
Pfeil Honing oil for use on Arkansas stones.
100ml.
Pfeil Razor Strop 1
Pfeil Honing Strops for the finest edges for all knives.
Birch base, faced with a fine calf leather.
Size 220 x 50 x 20mm
Pfeil Honing Strop 2
Pfeil Honing Strops for the finest edges for all knives.
Birch base, faced with a fine calf leather.
Size 300 x 40 x 20mm
Pfeil Polishing Cream
Pfeil polishing cream for strops.
50ml.
Approximately 4000-6000 grit.
Pfeil Polishing Paste, Green
Pfeil Polishing Paste is a fine abrasive paste for polishing honed bevels. Ideal for use with a powered strop, the paste features a cooling property, to avoid heating of the blade. The paste can be used with a cloth.
Weight 900g
Pfeil Canvas Tool Rolls
Pfeil offer high quality 8, 12 or 25 pocket canvas tool rolls for carving tools.
Pfeil Brass Carving Mallets
These Pfeil Brass Carving Mallets have a brass head with cherry handle which are gentle on the wrist and elbow.
The MK Klein weighs 450g and the MK Gross weighs 700g.
Supplied in cardboard sleeve.
Pfeil Hornbeam Mallets
The Pfeil carver's mallets are turned from a single piece of Hornbeam. 5 weights to choose from, ranging from 200g to a very weighty 850g.
Length of mallet;
HK60 length 230mm
HK70 length 280mm
HK80 length 300mm
HK90 length 280mm
HK110 length 280mm (laminated Hornbeam head)
Pfeil Carpenter Chisels
Introduced in 2010 from Switzerland, Pfeil Carpenters Chisels have strong Elm wood octagonal handles with an oval section. We prefer these to the bench chisels.
The blades are forged from K 510 steel, hardened up to 60 RC. Bevel edged with well marked facets. The blades are finely ground and polished.
Bevel angle 25°, razor sharp.
4mm wide to 40mm wide.
Overall length 240-260mm.
Pfeil Carpenter Chisel Sets
Introduced in 2010 from Switzerland, Pfeil Carpenters Chisels have strong Elm wood octagonal handles with an oval section. We prefer these to the bench chisels.
The blades are forged from K 510 steel, hardened up to 60 RC. Bevel edged with well marked facets. The blades are finely ground and polished.
Bevel angle 25°, razor sharp.
4mm wide to 40mm wide.
Overall length 240-260mm.
The...
Pfeil Butt Chisels
Pfeil Butt Chisels allow the maximum cutting control by allowing you to get very close to your piece of work. Ideal for cleaning up and fitting joints, modelling or working in a restricted space.
Octagonal handle with oval section, robust Acacia wood.
Razor-sharp finely honed blade, HRC 60.
Blade length 87mm and overall length 155mm
Pfeil Butt Chisels are available in 6mm (¼"),...
Pfeil Bench Chisel Set
Set of 6 Pfeil Bench chisels in a beechwood case.
Widths included are 6mm, 10mm, 12mm, 16mm, 20mm and 26mm.
Pfeil Marking Knives
The Pfeil Marking Knife is bevelled on both edges. The blade can be guided on either the left or right side of a straight edge for precise scribing.
The handle is oiled Bubinga, and the blade is K720 steel, hardened to RC 61.
Standard: Blade length is 40mm. Overall length is 180mm.
Small: Blade length is 34mm. Overall length is 160mm.
Pfeil Marking Knives - Single Bevel
The Pfeil Marking Knife is available with a bevel on just one edge, Lefthanded or Righthanded.
Oiled Bubinga handle, K720 steel blade. Hardness RC 61°
Lefthanded or Righthanded: Blade length is 45mm. Overall length is 150mm.
Pfeil Violin Maker's Knives
Pfeil Violin Maker's Knives are easy to resharpen because the special steel is hardened all the way through. These have a double bevel.
Pfeil Punches for Wood
These Pfeil Punches for wood are just great for creating background detail for your carvings.
The punches are made from steel.
Size 100mm x 100mm x 135mm
Set of 9 Pfeil Punches for Wood in Wooden Block
These Pfeil Punches for wood are just great for creating background detail for your carvings.
The punches are made from steel and weigh 540g each.
Size 100mm x 100mm x 135mm
Pfeil Round Burnisher
The Pfeil Round Burnisher is used for burnishing cabinet scrapes.
9mm diameter polished steel bar, 165mm long with cherry handle.
Pfeil Oval Burnisher
The Pfeil Oval Burnisher is used for burnishing cabinet scrapes.
Its oval section is a mirror polished steel bar and is 160mm long with cherry handle.
Pfeil Triangular Burnisher
Pfeil Triangular Burnisher has a triangular section mirror polished steel bar, 160mm long with cherry handle.
Pfeil Edge Trimming Plane
Pfeil Edge Trimming Planes are used for chamfering and rounding leather edges.
This Edge Trimming Plane has an oiled cherry handle and blade length is 190mm.
Three different size blades available:
LK1 0.75mm
LK2 1mm
LK3 is 1.5mm
Pfeil Half Moon Knives
Pfeil Half Moon Knives are great for for cutting and skiving leather.
The knives are available in 125mm and 150mm blade widths. Blade thickness is 1.5mm on both.
Oiled cherry handle with brass ferrule.
Pfeil Purfling Pick
The Pfeil Purfling Pick is used for cleaning the purfling channel.
Cutting width is 2mm and has a plum handle.
Pfeil Violin Maker's Gouge
Pfeil Violin Maker's Gouges are made of high-alloy carbon steel, the blades are razor sharp, and are ready to use.
Plum handles with brass ferrules. With a bent blade for shaping the tops and backs of stringed instruments, they are forged in one piece and have an inside bevel..