Sort By
Per Page
View
Grid
List
Lie-Nielsen Chipbreakers
Fits Lie-Nielsen No. 3 Bench Planes.
Lie-Nielsen chipbreakers are made of High Carbon Tool Steel and are 1/8" thick with a .015" lip ground at a 2 degree angle to provide excellent contact between the leading edge of the chipbreaker and the blade. Very solid. Supplied with the chipbreaker screw.
* 1-3/4" wide
Lie-Nielsen chipbreakers are designed specifically for their tools. It is possible...
Lie-Nielsen 50 Degree Frog
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches make smoothing difficult wood easier.
These 50 degree frogs will fit Lie-Nielsen...
Lie-Nielsen 55 Degree Frog
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch).
The higher pitches make smoothing difficult wood easier.
Spare Blade for Lie-Nielsen No. 2 Bench Plane
Replacement blade for the Lie-Nielsen No. 2 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...
Spare Blade for Lie-Nielsen No. 3 Smoothing Plane
Replacement blade for Lie-Nielsen No. 3 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...
Spare Blade for Lie-Nielsen No. 4 and 5 Plane
Replacement blade for Lie-Nielsen No. 4 or 5 Bench Planes.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror...
Roughing Blade for Lie-Nielsen No. 4 and 5 Planes
A blade with a cambered edge for the No.4 and No.5 planes. Used for thicknessing boards.
Spare Blade for Lie-Nielsen No. 4 1/2, 5 1/2, 6 & 7 Plane
Replacement blade for Lie-Nielsen No. 4-1/2, 5-1/2, 6 or 7 Bench Planes.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will...
Spare Blade for Lie-Nielsen No. 8 Jointer Plane
Replacement blade for Lie-Nielsen No. 8 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...
Toothed Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
Toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes...
Spare Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will increase performance, help achieve a razor edge quickly, and improve edge life in hardwoods.
* 2" wide x .175" thick
* A2 cryogenically...
Spare Blade for Lie-Nielsen No. 60 1/2 Block Plane
Replacement blade for Lie-Nielsen No. 60 1/2 Adjustable Mouth Block Plane. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Toothed Blade for Lie-Nielsen No. 60 1/2 Block Plane
Lie-Nielsen toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow this with a fine-set Smoothing Plane.
Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots. We recommend that you hone your...
Spare Blade for Lie-Nielsen No. 102 Low Angle Block Plane
Replacement blade for the Lie-Nielsen No. 102 Low Angle Block Plane.
The 1¼" wide 1/8" thick A2 steel blade comes with a 25° flat ground bevel.
Toothed Blade for the Lie-Nielsen 102 Block Plane
Replacement blade for the No. 102 or No. 103 Block Planes. Comes with a 25° flat ground bevel.
1.250'' wide x .125'' thick
A2 cryogenically treated Tool Steel
Toothed blades have small chisel-like teeth .030'' (.762mm) wide, and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
Please...
Spare Blade for Lie-Nielsen Model Maker's Block Plane
Keep your Lie-Nielsen Model Maker's Block Plane in top condition with this premium replacement blade. Specifically designed for the No. 100 Model Maker's Block Plane, this blade ensures your tool maintains its precision cutting performance.
Key Features:
High-Quality Steel: Made from A2 cryogenically treated tool steel, this blade is engineered for superior edge retention and durability.
Optimized...
Spare Blade for Lie-Nielsen Convex Sole Block Plane
Maintain the exceptional performance of your Lie-Nielsen No. 100-1/2 Convex Sole Block Plane with this high-quality replacement blade. Designed specifically for precision and durability, this spare blade ensures your plane continues to deliver smooth, efficient results.
Key Features:
High-Quality Material: Made from A2 cryogenically treated tool steel, this blade is engineered for durability...
Toothed Blade for the Lie-Nielsen 101 Violin Makers Plane
Toothed blade for our No. 101 Violin Maker's Block Plane. Comes with a 25° flat ground bevel.
7/8'' wide x 1/8'' thick
A2 cryogenically treated Tool Steel
Please Note: Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots. We recommend that you hone your toothed blade...
Spare Blade for Lie-Nielsen Large Router Plane
Replacement blade for the No. 71 Large Router Plane.
* 3/8" square tip
* O1 Tool Steel
Note: Blade does not work in vintage Stanley planes
Blades for Lie-Nielsen 271 Small Router
For use in the Lie-Nielsen No. 271 Small Router Planes. Made from O1 Tool Steel.
The Small Router Plane comes with a 1/4" wide square tip blade (this blade).
There are three specialty blades designed for inlay work are also available:
1/4" Pointed Tip
3/32" Pointed Tip
3/32" Square Tip (this one)
Small Blade Adapter for Lie-Nielsen Large Router Planes
This adaptor enables you to use the specialty blades for the Small Router Planes in the Large Router Planes.
Spare Blade for Lie-Nielsen No. 507 Rebating Block Plane
Replacement blade for Lie-Nielsen No. 60 1/2 Rebating Block Plane. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Lie Nielsen No.66 Beading Plane: Set of 5 Blank Cutters
Set of 5 blanks. Work with files to create your own shapes. This makes quick work of reproducing small pieces of molding for repair or restoration. Unhardened, 5/8" (1.58cm) wide.
Lie Nielsen No.66 Replacement Blades for L-N66
Seven hardened, double-ended blades will make 14 standard shapes. The blades will fit antique Stanleys as well, for those who have or acquire one without blades. Made from A2 Tool Steel, 5/8" (1.58cm) wide.
The blade profiles include:
1/16", 5/64", 1/8", 5/32", 3/16", and 1/4" Single Beads
3/32" and 1/8" Fluting
1/8" Double Reed
1/16" and 5/64" Triple Reeds
1/16" Quadruple Reed
3/32" Double Concave
3/32"...
Spare Blade for Lie-Nielsen No. 041 Small Shoulder Plane
Replacement blade for Lie-Nielsen No. 041 Small Shoulder Plane. Comes with a 25° flat ground bevel.
5/8" wide x .140" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 042 Medium Shoulder Plane
Replacement blade for Lie-Nielsen No. 042 Medium Shoulder Plane.
Comes with a 25° flat ground bevel.
* 3/4" wide x .140" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 073 Large Shoulder Plane
Replacement blade for Lie-Nielsen No. 073 Large Shoulder Plane.
Comes with a 25° flat ground bevel.
* 1 1/4" wide x .140" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 101 Violin Makers Plane
Replacement blade for our No. 101 Violin Maker's Block Plane.
Comes with a 25° flat ground bevel.
* 7/8" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 140 Skew Block Plane RH
Replacement blade for the right hand version of Lie-Nielsen No. 140 Skew Block Plane. Comes with a 25° flat ground bevel.
* 1 1/2" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 7 1/2 Low Angle Jointer
Replacement blade for the Lie-Nielsen No. 7½ Low Angle Jointer Plane. Comes with a 25° flat ground bevel.
2.300" wide x .240" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 48 Large Tongue & Groove Plane
For use in Lie-Nielsen No. 48 Tongue & Groove Plane. Centres on ¾" stock, leaving a ¼" wide tongue and .3125" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint.
* Comes with a 25° flat ground bevel.
* 3/16" thick, O1 Steel.
!!!!Note:!!!! Blade does not work in vintage Stanley planes.
Spare Blade for Lie-Nielsen No. 49 Small Tongue & Groove Plane
For use in Lie-Nielsen No. 49 Tongue & Groove Plane. Centres on 1/2" stock, leaving a .166" wide tongue and .230" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint.
* Comes with a 25° flat ground bevel.
* 3/16" thick, O1 Steel.
!!!!Note:!!!! Blade does not work in vintage Stanley planes.
Spare Blade for Lie-Nielsen Small Bronze Spokeshaves
Replacement blade for the Flat or Curved Sole Small Bronze Spokeshaves. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen Boggs Spokeshaves
Replacement blade for the Curved or Flat Sole Boggs Spokeshaves.
Comes with a 25° flat ground bevel.
* 2" wide x 1/8" thick
* A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 40 1/2 Scrub Plane
Replacement blade for the No. 40-1/2 Scrub Plane. Comes ground with a 3" radius.
* 1.450" wide x 3/16" thick
* A2 Tool Steel
Spare Blade for Lie-Nielsen No.85 Cabinet Maker's Scraping Plane
Replacement blade for the Lie-Nielsen No. 85 Cabinet Maker's Scraper. A2 Tool Steel hardened to Rockwell 60-62, cryogenically treated and double tempered. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take...
Spare Blade for Lie-Nielsen No.112 Large Scraping Plane
Ensure your Lie-Nielsen No. 112 Large Scraping Plane maintains its exceptional performance with this high-quality replacement blade. Designed to meet the rigorous demands of woodworking, this blade offers durability and precision for smooth, efficient scraping.
Key Features:
Premium Material: Crafted from A2 Tool Steel, cryogenically treated and double tempered, ensuring the blade holds a...
Spare Blade for Lie-Nielsen No.212 Small Scraping Plane
Replacement blade for the Lie-Nielsen No. 212 Small Scraping Plane. The blade is double tempered A2 Tool Steel, hardened to Rockwell 60-62. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...
Spare Blade for Lie-Nielsen 95 Edge Plane
Replacement blade for the Lie-Nielsen No. 95 Edge Planes. Comes with a 25° flat ground bevel.
1.105" wide x .125" thick
A2 cryogenically treated Tool Steel
Spare Blade for Lie-Nielsen No. 97 1/2 Small Chisel Plane
Replacement blade for the Lie-Nielsen No. 97½ Small Chisel Plane. Comes with a 25° flat ground bevel.
1¾" wide x 3/16" thick
A2 cryogenically treated Tool Steel
Toothed Blade for Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane
Image shows non-toothed blade
Toothed Replacement blade for the Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane.
Toothed blades have small chisel-like teeth. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will...
Depth Stop for Lie-Nielsen 271 Small Router Planes
Brass depth stop makes it easy to cut predetermined depth repeatedly.
Side Handle for the Lie-Nielsen No. 62 Low Angle Jack Plane
This powder-coated Aluminum 'Hot Dog' attaches to the side of the No. 62 Low Angle Jack Plane to make shooting more comfortable.