Lie-Nielsen 12 Tool Chisel Roll
12 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Lie-Nielsen 7 Tool Chisel Roll
7 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Lie-Nielsen 9 Tool Chisel Roll
9 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Lie-Nielsen Cross Peen Hammer
This small hammer is not only great for tacks and brads, but also for making fine blade adjustments on your planes.
Brass Head, 4 oz (115 grams).
Cherry handle
Overall size is 12'' (300mm) long and 4'' (100mm) wide
Lie-Nielsen Drawbore Pins
Drawboring is a great way to make a strong mechanical joint. A wooden pin is hammered through slightly offset holes in the two pieces, and pulls the joint together. You use Drawbore Pins to pull the joint together first (with some force and a twisting motion). This eases the edges of the hole, making driving the wood pin easier. You can also disassemble the joint if you want to work on the fit some...
Lie-Nielsen Leather Saw Cases
Protect your Backsaw with this fitted Michigan Leather case. Use it for storage and transportation. Beautifully made in Maine.
Lie-Nielsen Screwdrivers with Cherry Handles
These Lie-Nielsen screwdrivers are made to fit specific screws on Lie Nielsen tools. They may be useful for other jobs as well. Modelled after gunsmith's screwdrivers with machined tips, they are correctly sized to fit the screw slots, giving you good power and control without slipping. The Chipbreaker and frog adjustment screwdriver are particularly useful.
The blades are hardened 416 Stainless...
Lie-Nielsen Countersink with Cherry Handle
Cherry handle with solid brass ferrule.
3 flute, 82° countersink.
Please note that wood handles have natural figure and colour variations in the wood grain and may not match the photo.
Lie-Nielsen Dowel Plates
If you want to make exact-sized dowels from any wood you choose, a Lie-Nielsen Dowel Plate is the best tool.
It's also handy to get a precise tenon on chair spindles. The Lie Nielsen plates are 1/4" x 5-5/8" x 1½" surface ground A2 tool steel. The holes are machined with 6-degree clearance taper on the underside, the holes are straight for the first .025"; so this tool can be sharpened many times...
Sand-Flex Hand Block
These hand blocks have fine silicon carbide abrasive embedded throughout the rubber block which quickly removes rust from Cast Iron and Steel.
3 1/4" long x 2" wide x 3/4" thick.
Available in fine, medium, and coarse grits. Note coarse is shown in the main product picture
Made in Germany.
Sunshine Polishing Cloths (pair)
Keep your tools looking new! Safely cleans jewellery, gold, silver, brass, copper, glass, mirrors and most other surfaces, leaving a deep, long-lasting lustre.
Sold in pairs.
Rub surface to be polished with medium pressure. Non-scratching polishing and cleansing action works until cloth is completely darkened.
Do not wash. When it is darkened, discard.