Sort By
Per Page
View
Grid
List
Henry Taylor Cranked Bevel Edge Paring Chisels
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times.
Blade about 8¾" long.
Henry Taylor Incannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Henry Taylor Outcannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F17 - 1/4" (6mm)
F18 - 3/8" (9mm)
F19...
Henry Taylor Swan Neck Chisels
A Henry Taylor swan neck chisel is used to clean the bottom of mortices. The chisel is levered in use, not struck.
Available in 1/4", 5/16" and 3/8".
Henry Taylor Bevel Edge Chisels Set of 5
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles with brass ferrules.
Made in Sheffield, England for over 150 years.
F55 - 1/4" (6mm)
F56 - 3/8" (9mm)
F57 - 1/2" (12mm)
F59 - 3/4" (19mm)
F60 - 1" (25mm)
As recommended by Simon Frost in September 2021 issue of The Woodworker.
Supplied with a...
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers.
The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased.
Forged...
Henry Taylor Registered Mortice Chisel Set of 5
Made in Sheffield, England for over 150 years.
Blade about 5½" long.
F23 - 1/4" (6mm)
F24a - 3/8" (9mm)
F24 - 1/2" (12mm)
F25 - 3/4" (19mm)
F26 - 1" (25mm)
Henry Taylor Cranked Bevel Edge Paring Chisels Set of 5
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times.
Blade about 8¾" long.
Set includes 1/4", 1/2", 3/4", 1" and 1 1/4" chisels.
Henry Taylor Incannel Firmer Gouges Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Henry Taylor Long Thin Bevel Edge Paring Chisels Set of 5
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge.
Blade about 8¾" long.
Henry Taylor Short Cranked Bevel Edged Chisels Set of 4
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
Henry Taylor Outcannel Firmer Gouges - Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F17 - 1/4" (6mm)
F18 - 3/8" (9mm)
F19...
.png "Last Ones!")
Henry Taylor 60° Spoon Bent 'V' Tool
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These parting tools have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Spoon bent tools are for those awkward...
Henry Taylor Left Skew Spoon Bent Chisels
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Spoon bent tools are for those awkward...
Henry Taylor No.1 Allongee Chisels
10% discount from price shown. Whilst stocks last!
Henry Taylor No.1 Fishtail Chisels
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor...
Henry Taylor No.1 Spoon Bent Chisels
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Spoon bent tools are for those awkward...
Henry Taylor No.1 Straight Chisels
10% discount from price shown. Whilst stocks last!
Henry Taylor No.11 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.11 Spoon Bent Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.11 Straight Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.2 Skew Chisels
10% discount from price shown. Whilst stocks last!
Henry Taylor No.3 Allongee Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.3 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.3 Spoon Bent Gouge - 25mm
The only size remaining in this discontinued range is 25mm.
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle...
Henry Taylor No.3 Straight Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.39 60° 'V' Parting Tools
10% discount from price shown. Whilst stocks last!
Henry Taylor No.5 Allongee Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.5 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.5 Long Bent Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.5 Spoon Bent Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.5 Straight Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.7 Allongee Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. These tools widen progressively from the...
Henry Taylor No.7 Fishtail Gouges
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing chart can be viewed and downloaded here
Please Note: The image shows the 13mm version...
Henry Taylor No.7 Long Bent Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.7 Spoon Bent Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.7 Straight Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.9 Allongee Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. These tools widen progressively from the...
Henry Taylor No.9 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Henry Taylor No.9 Long Bent Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor No.9 Spoon Bent Gouge
10% discount from price shown. Whilst stocks last!
Henry Taylor No.9 Straight Gouges
10% discount from price shown. Whilst stocks last!
Henry Taylor Right Skew Spoon Bent Chisels
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These chisels have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Spoon bent tools are for those awkward...
Henry Taylor Veining Tools
10% discount from price shown. Whilst stocks last!
Carving Tools Set - 6 Tool Starter Set from Henry Taylor - Sheffield
The starter set comes with a little booklet which guides you through a simple relief project written by renowned carver Jeremy Williams.
All the tools come with the unique Acorn branding on the octagonal beech handles.
The 6 tools in the set are
- Flat carving chisel 6mm wide
- Shallow gouge (No.3) 6mm wide
- Medium gouge (No.5) 8mm wide
- V (parting) tool (No.39) 6mm wide
- 6mm...
Henry Taylor Woodcarving Punch - Triangle of Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor No.11 Straight Gouge - 1' (25mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.