5 1/2'' Post for Veritas Bench Hold Down
5 1/2'' Post for Veritas Bench Hold Down
This 5 1/2" Post is for the Veritas Bench Hold Down, for holes where through travel is limited. At just 5-1/2" long, it provides about 4" of clamping capacity. Patented.
£7.20 inc VAT
Benchcrafted HiVise + Mounting ScrewBenchcrafted HiVise + Mounting Screw
Benchcrafted HiVise + Mounting Screw
Taking cues from early French prototypes (commonly referred to as an "etau(x)" which is simply the French word for vice) Benchcrafted have gone a few steps further and made improvements and refinements over the historical versions. The body of the vice is designed to be much stronger, yet more compact with its inset arms and single clamping screw for attaching the vise to a workbench or table. The...
£305.00 inc VAT

Benchcrafted HiVise Mounting ScrewBenchcrafted HiVise Mounting Screw
Benchcrafted HiVise Mounting Screw
The mounting screw is designed for the HiVise to make it ultimately more portable. The HiVise can be made with either a tail vice cleat or a benchtop batten, but having a mounting screw will allow you to use it in multiple positions around your bench, or anywhere outside the workshop where you are allowed to make a mess! Anticipating the varied needs of woodworkers Benchcrafted designed the HiVise...
£75.00 inc VAT
Muzzles for Veritas Bench Dogs & PupsMuzzles for Veritas Bench Dogs & Pups
Muzzles for Veritas Bench Dogs & Pups
For clamping a finished piece without marking it, the slip-resistant muzzles slide over the Bench Dogs (or Bench Pups) to give you a non-marring surface. They have a hard, spring-grip, plastic body with six face ribs. Available in two sizes: 1¼" long for Bench Dogs or 3/4" long for Bench Pups. Sold in pairs.
from £1.98 inc VAT

Veritas Bench Dogs & Pups
Veritas Bench Dogs & Pups
These are made from solid brass rod. Sold in pairs. The crosshatching and 2° slope on the face help to hold wood securely, pulling it down onto the bench's surface. A side spring slides cleanly and holds it in position. The dogs are 110mm (4.3/8") long, the pups 60mm (2.3/8"). Both work well in combination with Veritas Wonder Dog and Wonder Pup Clamps. For 19mm (3/4")...
from £21.30 inc VAT
Veritas Planing StopVeritas Planing Stop
Veritas Planing Stop
These low-profile work stops present a broad bearing surface. Particularly useful with thin or narrow workpieces, each 1 1/4" wide anodized aluminum rail projects just 0.22" above the bench top, allowing materials as thin as 1/4" to be worked or planed without obstruction. It also provides a reliable registration surface for materials too narrow to span two adjacent bench dogs. The...
£21.48 inc VAT

Veritas Wonder Dogs & PupsVeritas Wonder Dogs & Pups
Veritas Wonder Dogs & Pups
Steel post and screw with black oxide finish, solid brass clamp head and handle. These can pivot in any direction that clamping is required. An easy-adjusting handle provides ample clamping pressure in any position. The dog head has two screw holes, so any tip shape can be cut with a scroll saw and attached for specialized work. The Wonder Dog post is 6½" and is drilled and tapped...
from £29.75 inc VAT
Lie-Nielsen Holdfast
Lie-Nielsen Holdfast
Inspired by the work of master blacksmith, Peter Ross. Cast Ductile Iron, hot oil finish. Fits a 3/4" diameter hole in a benchtop up to 4" thick (if your benchtop is thicker, you may need to relieve the bottom third of the hole to 1" diameter). Low profile, flexible enough to grip the work firmly, but easily loosened with a hammer. Overall shaft length is 13" (33.0 cm) Overall length of reach...
£84.00 inc VAT

Simon James 19mm (3/4") HoldfastSimon James 19mm (3/4") Holdfast
Simon James 19mm (3/4") Holdfast
Handmade, using traditional methods and a small forge by experienced craftsmen as a cottage industry. They are not mass produced so every one has very slight differences, which is what you expect with handmade workmanship. They are all hand stamped with the Simon James logo. Made from 18mm steel and are designed to fit 19mm (3/4") holes. Overall shaft length is 12" (30cm) Overall length of reach...
£49.00 inc VAT
Veritas Bench Hold DownVeritas Bench Hold Down
Veritas Bench Hold Down
The Veritas hold-down can clamp workpieces to a bench or anywhere a 3/4" hole can be drilled. Exceptionally high clamping forces can be obtained with this hold-down for two reasons. First, with the arm free to pivot independently, all levered forces are exerted downward, without any losses due to horizontal slippage from the canting action of the hold-down post. Second, the fine barb-shaped grooves...
£94.40 inc VAT

Veritas Quick-Release Wonder DogVeritas Quick-Release Wonder Dog
Veritas Quick-Release Wonder Dog
This version of the Wonder Dog has a fast-acting cam mechanism to speed up adjustments. You just slide the head against the workpiece, then throw the lever to apply clamping force. Curved and irregular shapes can also be clamped; two screw holes in the brass dog head let you attach a custom face of any shape, giving good control without marring work. The low-profile head and clamp body are 5/8"...
£55.80 inc VAT
Benchcrafted Moxon Vice
Benchcrafted Moxon Vice
The Benchcrafted Moxon Vice clamps to any bench, raising your workpiece to a convenient height and holding it rock-solid. If you cut dovetails and other joints by hand, this is a vise that will completely change your experience in the shop. Fast and effortless, the Moxon vice makes joinery a pleasure. The Moxon vice is fitted with cast iron hand wheels for rapid, easy adjustment. Instead of the handwheel...
£188.00 inc VAT

Benchcrafted HiViseBenchcrafted HiVise
Benchcrafted HiVise
Taking cues from early French prototypes (commonly referred to as an "etau(x)" which is simply the French word for vice) Benchcrafted have gone a few steps further and made improvements and refinements over the historical versions. The body of the vice is designed to be much stronger, yet more compact with its inset arms and single clamping screw for attaching the vise to a workbench or table. The...
£230.00 inc VAT
Benchcrafted Planing Stop
Benchcrafted Planing Stop
The Benchcrafted planing stop is made from mild steel. The teeth are milled into the stop then lightly deburr with abrasive paper to maintain the points of the teeth. The stop arrives sharp and ready to use. Easy Installation Using the same principle as their Barrel Nuts, the Benchcrafted Planing Stop mounts to the wooden stock via two machine screws and a single, double-tapped barrel nut. This provides...
£33.50 inc VAT

Lee Valley Vice Rack StopLee Valley Vice Rack Stop
Lee Valley Vice Rack Stop
This simple device from Lee Valley is designed to help prevent racking when clamping work at one side of a vice. Simply stack up as many of the 0.10" thick shims as you need to match the approximate thickness of your work, up to a total of 4", and insert it into the vice opposite the work being clamped. For thicker work, you can add a piece of scrap wood to occupy the bulk of the space, and then...
£19.00 inc VAT
Veritas 3/4" Surface ClampVeritas 3/4" Surface Clamp
Veritas 3/4" Surface Clamp
Hold down, bench clamp or surface clamp - the functions are the same just the name changes. True to form Veritas have taken an ordinary thing and made it much, much better - as well as a thing of beauty in brass and black satin. These fast acting surface clamps can be used anywhere you can drill a 19mm diameter hole. The post has a wedging mechanism which anchors it firmly (horizontally or vertically)...
£63.30 inc VAT

Veritas Bench Blades
Veritas Bench Blades
So named because of their very low profile, these project only 6mm above your bench top. A thumb-operated eccentric cam lever controls the sliding jaw, allowing you to secure work quickly. The jaw has a 6mm range of travel and applying up to 130kg of force. Flats on the cam provide secure stops at 3mm and 6mm of travel. The jaw face has a 5° inward cant to help hold a work piece securely. The...
from £17.28 inc VAT
Veritas Carvers ScrewVeritas Carvers Screw
Veritas Carvers Screw
Turned from a solid bar of brass, this carver's screw, with its tapered tip and high-profile threads, grips securely and guarantees that remounted pieces are held as securely the third and fourth time as they were the first. The hex portion clamps securely in a vice while you thread on a blank, or you can use a spanner. The moulded tightening knob has a low-friction brass insert. At 5" long overall,...
£19.20 inc VAT