Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
What's included..... 30 1/2" Saw Plate and 10" Kerfing Plane Plate. Blue Tempered 1095 Spring Steel. Hammer-set and sharpened by hand. Two brackets (with kerf pre-cut), one of which is tapped for the 3/8" eye bolt. 3" x 3/8" eyebolt with jam nut. Striker Plate with fastening screws. Two U-bolts to secure plate to brackets. ''All you have to do is cut and form the wooden components.''
£265.00 inc VAT
Pax 10' Guitar Saw
Pax 10' Guitar Saw
Also sometimes known as a Fret Saw, the Pax Guitar Saw is ideal for cutting the frets on a guitar. It has two holes in the blade so that a depth measuring gauge can be mounted (not supplied with the saw). The saw has a brightly polished brass back and a Walnut handle. Kerf: 0.022" approx. 16tpi as standard.
£28.85 inc VAT

Pax Jewellers Saw
Pax Jewellers Saw
The Pax Jewellers Saw has a very thin alloy steel blade and is made for the highest precision work. The saw has a brightly polished brass back and a Walnut handle. 20tpi as standard. Blade length 6". Individually blister packed.
£21.85 inc VAT
Rob Cosman Kerf SawRob Cosman Kerf Saw
Back In Stock
Rob Cosman Kerf Saw
If you cut half-blind dovetails you will love Rob's Kerf saw! The Kerf X-10 completes the saw cut. Waste removal is faster than paring and more accurate. This saw works with soft and hardwoods. The Kerf X-10 works in saws kerfs in the .024" to .026" width range. The handle is made of Mahogany and the blade is affixed to the ¼" x ¾" brass back with...
£115.00 inc VAT

Thomas Flinn Pax Fine Curved Inlay Saw 20tpi
Thomas Flinn Pax Fine Curved Inlay Saw 20tpi
The Pax Fine Inlay Saw is made for similar purposes to the Veneer Saw although this saw has 20tpi with a super thin curved blade specially crafted for the finest veneer work. The saw has a brightly polished brass back and Walnut handle. Blade length 3". Individually blister packed.
£23.40 inc VAT
Thomas Flinn Pax Veneer Saw 15tpi
Thomas Flinn Pax Veneer Saw 15tpi
The Pax Veneer Saw is made to enable cuts to be started in the centre of a panel of wood and for other inlaying work. The saw has 15tpi and the two different sides of the blade are made so that one side has a crosscut tooth formation and the other side has a rip tooth formation. The saw has a Walnut handle and are individually blister packed. Blade length 3".
£22.60 inc VAT