Sort By
Per Page
View
Grid
List
Lie-Nielsen Carcass Saw with Cherry Handle
The Carcass Saw is used for precise cuts across the grain, cutting tenon shoulders, and defining the edges of a dado.
It has 14 points per inch, filed crosscut, for cutting quickly, yet accurately and smoothly.
Blade is .020" (.5mm) thick, with a .003" (.076mm) set.
Overall length, including handle, is 19" (48.26cm), with an overall height of 4-7/8" (12.38cm).
Usable blade dimensions are 14"...
Lie-Nielsen Tapered Carcass Saw with Cherry Handle
This is the tapered version of the ever popular carcass saw. The taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line.
The tapered saw is very similar to the standard carcass saw in size, but has a thinner plate of .015". It tapers 1/4"...
Rob Cosman Bench Crosscut Saw
Every hand-tool woodworker needs a minimum of three backsaws: Dovetail, Tenon, and Crosscut Saws. Rob has designed and manufactured two different professional crosscut saws; his Joinery Crosscut and Bench Crosscut to meet this requirement.
Both of Robs crosscut saws are specialized for crosscutting applications. The Bench Crosscut Saw is designed for general crosscutting while his Joinery Crosscut...
Veritas Crosscut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed crosscut at 14tpi. The teeth have a rake angle of 15°, an included angle of 60° with alternate 15° bevels to efficienlty sever wood fibres rather than tear. The depth of cut is 60mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid...
Veritas Rip Cut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm.
The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece...
Bad Axe 14" Hybrid Thin Plate Carcass Saw - The Bayonet
The ''Bayonet'' - yet another strange name from Bad Axe Tool Works, but don't let that put you off. This carcass saw will excel at virtually any carcase joinery you throw at it. The hybrid-cut filing gives you a saw that will give you plenty of opportunities to put it to good use.
Bad Axe Tool Works takes the finest materials and pairs it with great craftsmanship to produce...
Rob Cosman Joinery Crosscut Saw - Ebony Resin Handle
Unique features of Rob’s joinery crosscut saw include;
with only .002 set per side this 15tpi saw will slice through wood and leave a ready-to-join surface, right out of the box!
you have a choice, we saw, shape, sand and buff to a satin finish, "ebony resin" composite handles with carved finger recesses for extra comfort and control.
the extra heavy brass back provides perfect...
Thomas Flinn Pax 1776 Tenon Saws
Available in lengths 10" and 12" with 13 or 15 tpi, in either Rip (for cutting with the grain) or Crosscut (for cutting across the grain) formation.
Blade depths are as follows:
10" Blade length = Blade depth 2"
12" Blade length = Blade depth 2 1/2"
These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The tenon saws are...